Availability
Showing In Stock Items. Show All 66 Items.
Wilwood Forged DynaPro 6 Big Brake front brake kits offer enhanced street performance and stopping power for your American muscle and vintage hot rods. Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads. Wilwood Forged DynaPro 6 Big Brake front brake kits will complement your street/strip ride with improved braking capacity, performance, and looks.
( 88 )
$1,440.23
Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!
( 54 )
$1,069.99
—
$1,512.99
RideTech RidePro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
Not Yet Reviewed
$1,620.00
These Harwood fiberglass front-ends will take some serious weight off your race car. They are made of heavy-duty fiberglass and feature a black gelcoat finish. The front-ends include the front fenders, grille, and bumper, all molded into one piece and modification is required for installation. Hoods and hood scoops are sold separately.
( 7 )
$1,394.99
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 177 )
$1,095.95
—
$1,319.99
Dakota Digital HDX direct-fit analog gauge systems feature the latest in aftermarket automotive instrumentation technology. They take personalization and usability to a whole new dimension, while retaining your favorite features from the wildly popular VHX-Series, such as LED backlighting for the numbers, tick marks, and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged, and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well. These features add up to clean, easy-to-read instrument systems in all conditions. Precision stepper motors provide accurate needle movement, along with a full sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. Dakota Digital HDX direct-fit analog gauge systems are available with your choice of black or silver alloy gauge-face styling. The systems allow the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme.
( 55 )
$1,543.75
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,249.95
—
$1,399.95
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 19 )
$1,033.99
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 35 )
$1,049.95
Belltech lowering kits with Street Performance shock absorbers properly lower your sport truck or SUV--the first time. Not only that, they provide you with all the components you need to achieve the look you want, as well as the alignment, performance, and safety you need! All of these kits feature Belltech premium twin-tube Street Performance shocks that set the standards for performance handling. Each lowering kit is model-specific and assures proper fit and function today, tomorrow, and years down the road on your vehicle. Tune your rig with the performance of Belltech lowering kits and Street Performance shocks.
( 112 )
$1,011.00
—
$1,243.00
UMI Performance complete front adjustable upper and lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance complete front adjustable A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,529.99
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,269.99
—
$1,289.99
Race cars ride low to the ground for greater agility, handling, and cornering. Obtain this physics-defying stance with Belltech lowering kits with Nitro Drop 2 shock absorbers. The completely redesigned Nitro Drop 2 shocks fuse internal valve technology with state-of-the-art construction to achieve superlative performance characteristics. They drop your center of gravity for nimble steering, diminished squat, and eye-popping looks, while producing maximum durability with quality-driven dust boots and rubber bushings. Nothing could be better than capturing unsurpassable performance with the ease of an OEM replacement!
( 67 )
$1,179.00
—
$1,184.00
Add utility above your pickup bed with the Xsporter Pro truck rack from Thule. This lightweight aluminum rack attaches to your bed rails without cutting or drilling, and has four one-key lock cylinders to lock the rack in place for security. Each of the two uprights adjusts in height from 6 in. to 33 in., and has a 71 in. wide aerodynamic crossbar with optional tool-free load stops to help secure cargo. Thule Xsporter Pro Truck Racks support up to 450 lbs. total and are backed by a manufacturer's limited lifetime warranty.
Not Yet Reviewed
$1,149.95
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$1,049.95
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,538.99
—
$1,647.99
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,192.99
—
$1,475.99
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,599.99
Dee Zee combo transfer tanks offer room for liquid, room for gear—and plenty of extra room in your truck bed! These units combine a handy utility chest, together with a liquid transfer tank, so they take up less of your much-needed truck bed space. The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Dee Zee utility chests have lockable stainless steel paddle handles. Combos are available in Brite-Tread aluminum, with or without an UltraBlack powdercoat finish; or in heavy-duty steel with a textured white or black powdercoat finish designed for corrosion protection. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting everything you need with Dee Zee combo transfer tanks.
Not Yet Reviewed
$1,183.99
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$1,071.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$1,049.95
Dee Zee transfer tanks offer room for liquid and allow plenty of extra room in your truck bed! The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting liquids you need with Dee Zee transfer tanks.
Not Yet Reviewed
$1,005.99
—
$1,349.99
Detroit Speed Front Speed Kit 1 handling packages are designed to work as an integrated system on your vehicle. By utilizing proven Detroit Speed components and carefully selecting components designed to complement each other, they are made for your driving needs, while having the ease of bolt-on installation. Speed Kit 1 handling packages are designed to bring your classic GM muscle car into the 21st century with improvements in ride, handling, and camber/caster correction.
( 1 )
$1,400.95
AFCO Racing S-10 small block V8 engine swap radiators feature two rows of 1 in. tubes to keep your V8 running cool. Don't risk your engine overheating by using other S-10 radiators that use only a single-row core, instead, for more reliable performance use one of these S-10 small block V8 engine swap radiators by AFCO Racing. Installation is easy and uses rubber isolated pins for mounting the radiator in the stock core support. AFCO Racing S-10 small block V8 engine swap radiators feature: * Built-in mounting brackets * Inlets and outlets are in the correct locations * Billet filler neck offers strength and higher quality appearance over stamped * 100 percent aluminum construction (no epoxy) * Furnace-brazed core—two rows of 1 in. diameter tubes
Not Yet Reviewed
$1,505.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
