CHEVROLET R30 - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $125 at Summit Racing

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.84 out of 5 stars ( 58 )

$3,478.95

VEGE Chevrolet 350 C.I.D. Remanufactured Long Block Crate Engines

If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon

3.72 out of 5 stars ( 25 )

$2,899.99

On Sale

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,199.95

ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines

Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.0 out of 5 stars ( 6 )

$3,034.99

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.58 out of 5 stars ( 146 )

$3,124.95

TMI Pro-Classic Sport Series Split-Back Bench Seats

TMI Pro-Classic Sport Series split-back bench seats are fully assembled and are complete replacements with slider tracks. No longer will you have to waste your time and money trying to repair worn-out factory seat frames and recover them with new foam and upholstery. Ready to bolt-in with the appropriate mounting brackets, TMI Pro-Classic bench seats restore your interior with easy-care vinyl and stylish plaid inserts available in a selection of colors to complement your vehicle. Order the model recommended for fitment in your truck.

5.0 out of 5 stars ( 2 )

$2,333.00

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,875.95

Clearance

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.7 out of 5 stars ( 77 )

$2,187.99

—

$3,335.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

Quick Fuel QFX-Series Carburetors

These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.

4.86 out of 5 stars ( 7 )

$2,151.95

Edelbrock Total Power Package 540 HP Big Block Chevy Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

3.78 out of 5 stars ( 18 )

$3,710.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

Helix CornerKiller IFS Suspension Packages

Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.

3.0 out of 5 stars ( 3 )

$3,399.95

—

$4,099.95

Helix Mustang II IFS Suspension Packages

Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.

2.35 out of 5 stars ( 17 )

$2,199.95

—

$3,499.95

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$2,399.99

—

$2,499.99

RAM Pro Street Dual Disc Clutches

RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.

3.0 out of 5 stars ( 1 )

$2,159.00

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats are specifically designed for your vintage or classic GM truck or SUV. Add style and performance to your interior with these low-back sport benches. Constructed with a tubular steel frame and reclining mechanism, the high-density seat foam has molded sport side bolsters for support. These platforms are covered in premium black vinyl with black stitching for compatibility with any interior theme. Step up your dress up game with an assist from Brothers Trucks split-bench seats.

Not Yet Reviewed

$2,254.95

Pace Edwards BedLocker Electric Retractable Tonneau Covers

Pace Edwards BedLocker electric retractable tonneau covers feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker's patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability. Other features: * Hard tonneau cover retracts into canister at the front of the truck bed * Electromagnetic brake locks the cover in any position * Low-profile, aerodynamic design increases fuel economy by up to 11 percent * Fits over fifth-wheel trailer hitches * Tonneau comes with WeatherGate tailgate seal

4.8 out of 5 stars ( 5 )

$2,994.54

Bed Wood and Parts Bed-In-A-Box Deluxe Kits

Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!

5.0 out of 5 stars ( 1 )

$2,015.00

—

$3,700.00

Bed Wood and Parts Standard X Kits

Bed Wood and Parts Standard X kits include your wood choice, mild (paintable) steel bed strips with zinc coated hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Standard X kit designed to fit your truck bed!

Not Yet Reviewed

$2,169.00

—

$4,445.00

Bed Wood and Parts Deluxe X Kits

Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!

Not Yet Reviewed

$2,140.00

—

$4,695.00

Bed Wood and Parts RetroLiner Wood Bed Liner Systems

Bed Wood RetroLiner systems offer enthusiasts who prefer an all-in-one kit a truly innovative product to deliver yesteryear's classic touch to your late model truck. RetroLiner wood bed liner systems provide American craftsmanship that will boost your truck's looks with beautiful wood only available through Bed Wood and Parts. The systems include your choice of nearly 40 exotic and popular wood species--all kiln-dried and stabilized, precut, properly milled, grooved, 4-stage finish sanded, and delivered ready to finish! Plus, you'll receive cut-to-length polished stainless steel or natural steel bed strips and mounting hardware, mounting pads, a frame, an installation tool, and comprehensive, easy-to-follow instructions. There's no drilling or cutting required and they install without damage to your factory steel bed! Whether you're restoring a pre-war classic, personalizing your truck from the musclecar era, or customizing a newer domestic or import model, you can trust your project to Bed Wood and Parts RetroLiners because, as they say, "Wood looks good!"

Not Yet Reviewed

$2,320.00

—

$4,995.00

Bed Wood and Parts Undrilled BedWood Kits

Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these undrilled BedWood kits are precision milled with your truck in mind. They come undrilled, allowing you to drill your own holes for custom application or hidden mounting holes. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.

Not Yet Reviewed

$2,045.00

—

$3,465.00

CHEVROLET R30 Parts and Accessories