Availability
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 4 )
$3,625.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 99 )
$1,999.95
—
$2,149.95
Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 15 )
$3,099.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,291.95
—
$1,332.95
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 607 )
$686.54
—
$714.54
Summit Bucks
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 149 )
$2,491.95
—
$3,489.95
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 18 )
$4,302.95
Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.
( 99 )
$1,604.34
—
$2,857.65
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,730.95
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 365 )
$492.15
—
$865.95
March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.
( 51 )
$1,877.99
—
$3,112.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 6 )
$3,334.99
Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!
( 629 )
$339.99
—
$520.99
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 1983 )
$499.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 135 )
$331.95
—
$344.95
Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits are the perfect addition to front Big Brake upgrades for incredible stopping power. These disc brake kits feature FNSL4R 4-piston oversize forged billet aluminum calipers, 13 or 14 in. 2-piece premium rotors, and high performance BP-10 compound pads. Also included is a high-quality, drum-style parking brake assembly. The neatly hidden internal shoe system provides a clean installation, with superior static holding power for parking. Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits provide the extra power to reel in your beast. Order the kit designed for your vehicle application.
( 28 )
$2,141.96
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 34 )
$869.95
—
$1,049.95
Summit Racing™ Pro LS Swap aluminum radiator and fan combo kits are available for most popular LS swap applications. The kits include a quality-constructed aluminum radiator to provide exceptional weight savings over stock equipment, fan shroud, and a radiator cap. The radiators come in a variety of configurations, each possessing their own unique combination of features, to work for the specific make and model vehicle that they're intended. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. Select the Pro LS Swap radiator and fan shroud combo designed for your application.
Not Yet Reviewed
$989.99
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 232 )
$819.00
—
$1,202.00
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 54 )
$2,250.95
—
$3,478.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 599 )
$823.00
—
$1,083.00
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,495.00
—
$6,645.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
