Availability
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
Speedtech Performance USA Pro Touring 1967-69 F-body complete front subframes are designed as bolt-in packages that will elevate your first generation F-body to an entirely new level of performance. They include a specially matched, high-clearance tubular control arm front suspension; double-adjustable coilover shocks; and power steering rack and pinion for the optimum in handling performance and daily drivability. These suspension packages are available for a variety of classic muscle cars from the 1960s. Additional features: * Strong box-type, laser-cut and JIG-welded construction * Reduced weight over factory frames * Factory-alignment holes offer ease of aligning frame to body * Guldstrand mod geometry already built-in * Upper control arm mounts feature additional camber curve adjustability * Increased header and exhaust clearance * Fully adjustable rear crossmember fits all GM transmissions, as well as T-56 and TKO * Built-in tow/tie-down hooks eliminate strapping around painted frames * Accepts most aftermarket suspension components which fit a factory frame--and that clear coilover shocks * Heat-treated tubular 1 1/4 in. sway bar kit * Power rack and pinion unit with steering arms * QA1 double adjustable coilover shocks with thrust washers and adjusting wrench included; allows for 2 1/2 in. of ride height adjustment * Mounting hardware, instructions, and custom alignment specs
( 1 )
$7,452.00
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,495.00
—
$6,645.00
Detroit Speed hydroformed subframes are bolt-in replacements for the original stock subframe. They're designed to improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the only subframes in the aftermarket industry with hydroformed frame rails—which offer strength and stiffness, precise quality, and repeatability. Hydroforming preserves the steel's integrity because it's crafted at low temperatures, unlike traditional high-temperature processes which decrease material strength. Dozens of models are available for vehicles from the 1960s, '70s, and '80s. Order the package recommended for your application. Detroit Speed hydroformed subframes also include: * Stamped crossmembers * Tubular upper and lower control arms * Coilover shocks with "Detroit Tuned" valving * Coilover spring * Power rack and pinion steering * Splined sway bar * C6 steering knuckles and bearing packs
Not Yet Reviewed
$9,389.95
—
$11,557.95
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.
Not Yet Reviewed
$8,868.95
—
$10,706.95
Upgrade your front suspension with the Speedtech Performance USA ExtReme subframe featuring forged spindles. These packages are designed to handle all driving conditions with ease—ideal for daily driving, autocross, and track days. The box welded construction and tabbed through frame gusseting provide added torsional rigidity, while the fully adjustable wheel alignment and corrected Ackerman for better grip during cornering facilitate a customizable driving experience. The kit includes custom designed upper and lower control arms, a durable Sweet Mfg. dual power rack and pinion steering, QA1 custom valved single adjustable coilover shocks, and a splined front sway bar with spring rate options. The exclusive ExtReme forged spindles offer optimized geometry and improved KPI/SAI angles, providing increased tire grip and a more precise driving experience. Order the front suspension package recommended for your vehicle. ExtReme Front Subframe Includes: * Full ExtReme subframe * Custom designed upper and lower control arms with high clearance to accommodate wide wheels * Durable Sweet Mfg. dual power rack and pinion steering * QA1 custom valved single adjustable coil over shocks, spring rates of your choice included * Tuned, adjustable, splined front sway bar with spring rate options for street, pro-touring/auto cross and road course * Exclusive ExtReme forged spindles with C7 hubs and maintenance free sealed bearing * Fully adjustable transmission crossmember that will accommodate all engine and transmission combinations ExtReme Front Subframe Features and Benefits: * Boxed construction welded with tabbed through frame and crossmembers for added torsion rigidity * Speedtech Performance chassis and subframes come exclusively with forged 7075 aluminum ExtReme spindles * 78 percent motion ratio for faster shock response and more precise control * Increased shock length providing more suspension travel * Virtually zero bump steer, .005" over the full travel of the system * 30 +/- 3 degree of steering angle * Exclusive system provides optimum Ackerman for up to 20 percent more inside tire grip when cornering * Industry exclusive optimized roll center for low, mid and high travel * 3-piece chromoly tubular splined sway bar standard, optional spring rates * Excellent system for street, autocross and track days * Ride heights to meet your vision for styling the car exactly the way you want it * Accommodates greater than 315/30/18 tire with full steering ExtReme Forged Spindle Features: * Forged from 7075 aircraft-grade aluminum * Optimized geometry unmatched in any other Corvette style spindle * Significantly improved KPI/SAI angle * Requires less caster to achieve maximum tire contact patch * Significantly reduced scrub radius * Billet steering arm provides increased Ackerman angle * Achieves optimum tire slip-angles, increasing front tire grip * Maintains optimum tire grip with less backspaced wheels * Brake caliper bolt pattern is direct carryover from Corvette C5 and C6, opening up many options * Comes standard with a maintenance-free factory GM Corvette C7 hub and sealed bearing * From parking lots to tracks, it simply drives and turns better
Not Yet Reviewed
$9,968.00
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.
( 10 )
$6,448.95
—
$8,286.95
Heidts Pro-G independent front suspension kits are designed to provide unbelievable cornering and overall handling. They feature a direct bolt-on Pro-G subframe; simply unbolt and remove your front sheetmetal, engine, transmission, old subframe, then install the complete unit. These kits are available for a wide range of vehicles from the 1960s, '70s, and '80s. Includes: * Pro-G subframe * Pro-G 2 in. dropped spindles * Tubular upper and lower control arms * Power rack and pinion steering * Disc brake kit with 11 in. diameter rotors and 4-piston calipers * Billet coilover, single adjustable shocks with silver powdercoated springs * Transmission crossmember
( 1 )
$7,614.00
RideTech 1973-74 GM X-Body coilover suspension systema include everything you need to upgrade your existing suspension completely. Each package contains front upper and lower control arms, tall spindles, front sway bar, a rear 4-Link, and four HQ or TQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all of the guesswork. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Order the system recommended for your specific application. Additional product features: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop which allows for the use of longer shocks, creating more suspension travel * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings * Bolt-on 4-link greatly improves traction, handling, and ride quality. Installation does not require any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini tubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack (NOTE: Some 1973-74 cars have a different shape frame rail and require kit number 11260202. See the instruction manual for identification details.)
Not Yet Reviewed
$5,875.00
—
$8,015.00
RideTech 1968-72 GM X-body coilover suspension systems include everything you need to completely upgrade your existing suspension. They contain front upper and lower control arms, tall spindles, front MuscleBar, a rear 4-Link, and four HQ Series coilovers for every corner of your vehicle. The RideTech tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop, which allows for the use of longer shocks—creating more suspension travel. The bolt-on 4-link vastly improves traction, handling, and ride quality. Installation doesn't require any major modifications to the floor pan and requires only minimal welding to the axle tube (works with mini tubs). The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1968-72 GM X-body coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, parts, and specs: * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joints have been moved back to allow for additional caster setting (improves high-speed stability and steering feel; offset slugs also available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Lower shock mount dropped to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink end links that provide immediate engagement between chassis and control arms)
Not Yet Reviewed
$5,875.00
RideTech 1968-74 Nova air suspension systems provide the components to achieve an ultra-low stance, while improving the suspension geometry for added drivability. All you need to add to these kits is one of RideTech's compressor systems. RideTech 1968-74 Nova air suspension kits include: * RideTech tall spindles induce more negative camber gain to maximize tire contact patch during cornering * Upper and lower front StrongArms * HQ Series Shockaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling * Front MuscleBar helps reduce body roll, crates room for wider tires, and includes PosiLink endlinks * Bolt-on 4-link greatly improves traction, handling, and ride quality
Not Yet Reviewed
$6,065.00
Transform your vehicle's handling with one of these Hotchkis Sport Suspension Stage 2 TVS systems. They provide completely tuned suspension handling, improved driver safety and control, and an easy bolt-on installation. The systems have been designed and rigorously tested on the track, and yet are comfortable enough for your local cruise-in. Every aspect of the suspension has been reengineered for maximum performance, providing your vehicle with the ultimate suspension system.
( 5 )
$5,440.91
—
$5,626.18
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
RideTech 1973-74 air suspension systems fit a variety of vehicles—including Chevy Nova, Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models. These packages allow you to achieve that ultra-low show stance and feature several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Each system includes front and rear HQ or TQ Series ShockWaves, upper and lower StrongArms, tall spindles, bolt-on 4-Link and front MuscleBar. Order the model recommended for your application. Additional product details: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. pin drop which allows for the use of longer shocks, creating more suspension travel * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin® bushings with 13 percent PTFE are used to reduce deflection and stiction * Shockwaves utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for under-hood access * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings * Bolt-on 4-Link greatly improves traction, handling, and ride quality. Installation does not require any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the race track (Noe: Some 1973-1974 cars have a different shape frame rail and require kit number 11260297. See instruction manual for identification details.)
Not Yet Reviewed
$6,065.00
—
$8,385.00
QA1's 4-link conversion and narrowed Ford 9 in. axle kits are an all-in-one solution that gives you everything you need to get your First-Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom narrowed 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. These QA1 upgrade kits have been engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to outsource each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your car as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Key Features: * Narrowed housing to accommodate wide wheel and tire packages in mini tubbed cars * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$5,525.95
QA1's 4-link conversion and standard Ford 9 in. axle kits give you everything you need to get your 2nd Gen Camaro or Firebird project on the road—fast. QA1 paired their 4-link suspension kit with a custom 9 in. rear housing for enthusiasts seeking top-tier performance and hassle-free installation. Your time is valuable, so say goodbye to hunting for junkyard rear ends or struggling with endless measurements and mismatched components—every component in this package is tested by QA1 to fit the first time. Each kit is engineered to deliver the performance, ride quality, and adjustability you need to handle serious power and aggressive driving—without the hassle of having to source each part. Ultimate shock performance: Ditch your leaf springs for QA1 MOD Series coilovers, triangulated 4-link suspension and an all-new narrowed 9 in. rear end. QA1's MOD shocks are designed to provide the ultimate in tunability and performance. With their four-way adjustable valving, remote nitrogen canisters, and huge dampening forces, QA1 MOD shocks deliver in any driving scenario. QA1 4-link kits are fully engineered to provide ride height, ride quality and instant center adjustability. Whether you're after a lowered, aggressive look or need clearance for wider wheels and tires, QA1 systems deliver. Easy installation: QA1 is committed to delivering products that make upgrading your vehicle as simple as possible, and their 4-link kits with 9 in. housing are designed for a bolt-on installation, eliminating the need for custom fabrication. Performance housing features: * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets reduce flex under high loads, ensuring your suspension remains rigid * Heavy-duty 3 in. OD, 1/4 in. wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Durable semi-gloss powder coat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and Jack Pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability
Not Yet Reviewed
$5,525.95
Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.
Not Yet Reviewed
$6,331.95
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$13,863.00
Detroit Speed Front Speed Kit 3 handling packages are designed to work as an integrated system on your vehicle. By utilizing proven Detroit Speed components and carefully selected parts designed to complement each other, the kits are tailored to your driving needs—with the ease of bolt-on installation. Front Speed Kit 3 handling packages are designed to bring your classic GM muscle car into the 21st century with improvements in ride, handling, and camber/caster correction. Packages include: * Tubular upper control arms with Delrin bushings * Tubular lower control arms with Delrin bushings * Detroit Speed aluminum body coilover shocks with coilover springs * Detroit Speed 600 steering gear rag with rag joint * Tubular tie rod end adjusters * Idler arm * Inner and outer tie rod ends * Detroit Speed tubular sway bar
Not Yet Reviewed
$5,567.95
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 10 )
$5,081.03
These Hotchkis Sport Suspension TVS systems are all-inclusive kits that have been designed and tested as systems. There's no need to mix and match components--Hotchkis Sport Suspension TVS systems include everything you need for suspension and handling that can't be beat.
( 7 )
$5,048.61
Speedtech Track Time suspension packages make your vehicle better than great. You want your car to handle like a race car, but still drive comfortably down the street. Track Time kits combine custom-tailored components for your specific vehicle that will radically increase performance—while delivering a ride quality that even your grandma would appreciate. Depending on your vehicle, Speedtech uses parts of their Pro Touring subframe, Street Fighter, or Road Assault systems and combines them with their rear torque arms or their Articulate conversions, plus other parts to create Track Time suspension that's ready for the race, yet rolls easy down the highway—what more could you ask for?
Not Yet Reviewed
$12,856.06
BluePrint Engines 50 state legal long blocks are designed and manufactured to factory specs for specified vehicles. They're built using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make them better than the original—while still meeting the description of a "replacement" engine. From Ford Windsors to Chevy big and small blocks, these assembled crate engines are available for a wide range of vehicles spanning a half-century. Select the recommended fitment, specifications, and options needed for your swap.
Not Yet Reviewed
$9,349.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
