Availability
Showing In Stock Items. Show All 60 Items.
Give your engine an aggressive, custom look with a pair of GM licensed slant edge valve covers by Proform. The diagonal cut of the top section ensures no mess, and the bottom lip will give a tight seal. Each of these valve covers is designed to clear roller rockers and stud girdles. They're available in a variety of styles and finishes for applications from the 1950s and up.
( 214 )
$254.95
—
$402.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 385 )
$305.95
—
$472.95
If you have been looking for great looks in an easy-to-install package, look no further than Proform GM licensed Chevy engine dress up kits. The valve covers are constructed of heavy-gauge steel to reduce leakage around the flanges and have the Bowtie Emblem embossed into them. They come in your choice of three finishes: triple chrome plated for a durable, long-lasting shine; black crinkle for little cleaning; or high-tech metallic gray.
( 112 )
$317.95
—
$339.95
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 180 )
$305.95
—
$518.95
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 140 )
$385.82
—
$528.00
Restore your engine to its true power potential with Melling's stock replacement cam and lifter kits. They're perfect for either replacement or stock rebuilds. Melling cam and liter kits also include a matched set of lifters so you won't have to worry about mismatched parts during installation.
( 20 )
$269.99
Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
( 140 )
$522.95
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$426.99
—
$451.99
Proform GM licensed Collector's Series slant-edge valve covers top your small block with aggressive looks and innovative design. These premium die-cast valve covers have more internal clearance than most, and the raised Bowtie Emblem with Chevrolet lettering adds standout looks. These baffled covers include grommets and are available in a choice of powdercoated colors. Crown your engine with show-quality Proform GM licensed Collector's Series slant-edge valve covers--your small block never looked so good!
( 11 )
$270.99
—
$317.95
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 336 )
$258.95
—
$549.95
Holley Muscle Series valve covers are a blast from the past inspired by 1970s-era GM factory L82/LT1/Z28-equipped engines. They fill your desire with the iconic finned design and retro styling cues. You can choose from four finishes to best match your small block. Order the pair recommended for your year/make and engine application. Product features include: * Cast aluminum construction and fin design create strength and rigidity to offer years of leak-free performance * Standard height * Twist-in oil fill knockout (cap included) on one cover * Recessed area to place the included adhesive-backed Holley emblem or any round emblem of your choice on the other cover * Pre-installed internal oil baffles on both covers * PCV grommets
( 32 )
$381.95
—
$449.95
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 10 )
$319.74
Offering polished performance, Proform slant edge diecast aluminum valve covers aren't just another pretty face. They're made from an innovative mold design that delivers generous internal clearance. These tall covers feature a removable baffle and include grommets. Plus, the price is pretty sweet, too! Top your cylinder heads with the performance and value of Proform slant edge diecast aluminum valve covers.
( 38 )
$275.95
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$289.99
COMP Cams is bringing back the musclecar sound—and it's nastier than ever! Few things grab our attention at a car show or cruise night more than a car with a thumping high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams' engineering team proudly introduces the Thumpr retrofit hydraulic roller camshafts. They are a series of camshafts designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. They give you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. COMP Cams Thumpr Series camshafts feature a cutting-edge hydraulic roller design that delivers a substantial power increase over identical hydraulic flat tappet grinds—without sacrificing reliability or ease of maintenance.
( 33 )
$549.95
COMP Cams Xtreme Energy retrofit camshafts are built to take advantage of the latest cam technology—and provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these hydraulic roller tappet cams provide better throttle response, engine vacuum, and top-end horsepower than equivalent cams from other manufacturers. Choose the model and options designed for your engine application.
( 58 )
$549.95
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$338.95
On Sale
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$268.95
—
$399.95
COMP Cams Magnum solid lifter cam and lifter kits are specifically designed for the street enthusiast looking for more power and that Pro Street sound. Whether your choice would be the 270s with low-speed torque and noticeable idle, or the 306s for larger cubic inch engines with tremendous high-rpm power and radical idle, one of the Magnum series cam and lifter kits will fit your engine's needs.
( 30 )
$390.95
These COMP Cams Xtreme 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 kit for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 14 )
$329.95
Holley M/T valve covers are flashbacks to 1972. Nothing was cooler than cruising in your hot rod with a Holley double pumper and M/T finned aluminum valve covers. Each Holley M/T valve cover is precision-manufactured with knockout plugs for stock PCV and oil fill installations. These covers feature polished top cover surfaces that may be used for engraving your name horizontally next to the deep heat dissipating fins. Available in your choice of black crinkle or a polished finish, each Holley M/T valve cover comes in retro packaging styled after the original. Order the pair designed for your engine application.
( 29 )
$268.95
—
$318.95
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 59 )
$258.95
PRW offers Elite Series rocker arms for a variety of applications, including many Chevrolet, Ford, American Motors, Oldsmobile, and Pontiac vehicles from the 1930s and up. They incorporate an exceptional design that provides plenty of clearance for large diameter springs. These stud mount rocker arms are manufactured from premium quality 17-4ph stainless steel, a superior alloy that is high in nickel and chromium. This rigid premium material provides high yield strength to help resist deflection and has extraordinary fatigue resistance. PRW stainless steel rocker arms feature full cage friction-reducing needle bearings and extra-large trunnions to spread out the load and reduce wear. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to resist the severity of racing and to minimize scrubbing. Each rocker body is hand-polished, assembled, and carefully inspected to provide customers with some of the finest quality rocker arms available to the racing and performance industry. Each set of 16 comes complete with PRW poly locks. Product highlights: * Lightweight design * PRW poly locks included * CNC-machined pushrod cups * Heat-treated Cr40 steel rollers and shafts * Manufactured from 17-4ph stainless steel * Features full complement friction-reducing needle bearings * Wide assortment of ratios to suit almost any cam profile
Not Yet Reviewed
$503.16
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$464.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
