Availability
Showing In Stock Items. Show All 235 Items.
Our Summit Racing™ complete front drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. The kits are available in standard and ultra versions (ultra versions include cross-drilled, slotted rotors and braided brake lines). Order the model recommended for your vehicle. Summit Racing™ complete brake conversion kits include: * Power brake booster * Master cylinder * Proportioning valve kit (where applicable) * Rotors * Calipers * Backing plates (where applicable) * Spindles or brackets to convert existing spindles (depending on application) * Brake hoses and banjo bolts (where applicable) * Bearings * Seals * Dust caps * Spindle nuts and washers * Installation hardware
( 39 )
$907.95
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$804.41
—
$815.95
On Sale
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 67 )
$979.99
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 101 )
$843.95
—
$1,056.95
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 235 )
$954.00
—
$1,086.00
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 542 )
$779.95
—
$1,049.95
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 365 )
$850.95
—
$1,246.50
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 623 )
$752.54
BMR A-arms stabilize your vehicle. A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. BMR Suspension A-arms are fabricated from heavy-duty 0.095 in. wall DOM tubing with laser-cut, CNC-formed plate steel for extra strength and to eliminate deflection. BMR A-arms are fitted with heavy-duty ball joints and 95-durometer polyurethane bushings for a solid, more responsive feel over the stock rubber bushings. Polyurethane adds strength and reduces deflection over the stock rubber bushings, while still absorbing much of the NVH, providing you with a great blend of performance and comfort. Designed for street performance, drag race, handling, and pro-touring applications, BMR A-arms give you improved geometry and increased lateral grip during cornering situations.
( 108 )
$809.95
—
$929.95
Summit Racing™ Pro LS Swap aluminum radiator and fan combo kits are available for most popular LS swap applications. The kits include a quality-constructed aluminum radiator to provide exceptional weight savings over stock equipment, fan shroud, and a radiator cap. The radiators come in a variety of configurations, each possessing their own unique combination of features, to work for the specific make and model vehicle that they're intended. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. Select the Pro LS Swap radiator and fan shroud combo designed for your application.
Not Yet Reviewed
$979.99
—
$989.99
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 34 )
$869.95
—
$1,049.95
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 82 )
$825.00
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 103 )
$750.99
—
$801.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,040.50
—
$1,079.50
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 483 )
$945.25
—
$1,021.25
Our Summit Racing™ complete front drum-to-disc brake conversion kits with lowering spindles take the guesswork and high price tag out of building a braking system. The Summit Racing™ complete brake kits with lowering spindles are available in standard and ultra versions (ultra versions include cross-drilled and slotted rotors and braided brake lines). Complete kits include: * Power brake booster * Master cylinder * Proportioning valve * Rotors * Calipers * Backing plates (where applicable, not included with lowering spindles) * Lowering spindles * Brake hoses and banjo bolts * Bearings * Seals * Dust caps * Spindle nuts and washers * Installation hardware
( 2 )
$903.95
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 46 )
$949.95
—
$999.95
Classic Performance Street Beast hydraulic brake assist kits will upgrade your manual or vacuum-assisted brakes. They're designed to work off your standard power steering pump. The Street Beast kits include an aluminum master cylinder, firewall mounting bracket, side-mounted proportioning valve and stop block kit, rubber pressure and return hoses, and all necessary fittings and mounting hardware. CPP also offers the hydraulic brake assist unit separately. Get the stopping power you've always needed with a Classic Performance Street Beast hydraulic brake assist kit, available for hundreds of applications from the 1950s and up.
( 34 )
$898.99
—
$978.99
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 46 )
$899.95
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$999.99
The Right Stuff disc brake conversion kits are specially designed to fit any factory 14 in. wheel, but also work well with larger wheels. This includes the OEM steel wheels found on many vehicles that came equipped with drum brakes. These conversion kits mount to your stock drum brake spindles, streamlining installation compared to kits that require a spindle change. Order the assembly options designed for your vehicle. Additional features include: * Proprietary 10.5 in. rotors to clear 14 in. wheels * Less wheel offset compared to traditional disc brake conversion kits (amount varies by application) * 1967-72 GM A-body, 1967-69 F-body, and 1968-74 Novas bolt to OEM drum spindles with no modifications * 1964-66 GM A-body applications require the two lower holes in the drum spindle and steering arm to be drilled out to 1/2 in. * No backing plates are included or required
( 128 )
$859.05
—
$940.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
