Availability
Showing In Stock Items. Show All 36 Items.
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 68 )
$10.99
—
$20.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$12.99
—
$29.99
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$72.99
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$13.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$34.99
ACDelco Gold engine coolant sensors are a high-quality aftermarket replacement component for many vehicles on the road today. These premium sensors are manufactured to exceed your expectations for fit and performance. Order the model recommended for your application.
( 42 )
$27.99
Summit Bucks
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$19.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$12.99
—
$157.99
ACDelco offers oil pressure safety switches for thousands of vehicles spanning more than half a century. These OE-style replacements are available in a variety of styles and materials, all manufactured to factory specifications for precise fit and performance. Order the model recommended for your application.
Not Yet Reviewed
$18.99
Summit Bucks
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$15.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$27.99
Don't take chances with an old, questionable, or malfunctioning knock sensor that diminishes your vehicle's fuel economy, or worse, your engine. The engine knock sensors play a dual role in helping to monitor and protect your engine. Like other sensors, knock sensors monitor engine operation to optimize performance. In addition, knock sensors protect the engine against power-robbing and potentially destructive engine knock. Standard Motor Products replacement knock sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Performance.
( 12 )
$23.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$28.99
ACDelco speed sensor seals are GM-recommended replacement parts for your vehicle's VSS. These small but very much needed O-rings offer the quality, reliability, and durability of OE, along with the proper fit and performance. Get in gear for efficient driving; install your vehicle speed sensors with the seals designed for your application from ACDelco.
( 1 )
$4.99
Summit Bucks
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 29 )
$34.99
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$22.99
The coolant temperature sensor, also known as the coolant temperature switch, is an engine management system sensor used to monitor the engine coolant's temperature. Because temperature play a vital role in engine performance, a problem with your coolant sensor could quickly translate into engine issues. Holstein Parts coolant temperature sensors contain only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. And they offer superior coverage for domestic and import applications.
Not Yet Reviewed
$13.99
Chevrolet Performance offers coolant temperature sensors that will fit thousands of domestic and foreign applications from the late-1970s and up. These small but important parts measure the temperature of the coolant/antifreeze mix in your cooling system, providing an indication of how much heat the engine is giving off. Order the replacement model recommended for your vehicle and engine.
( 2 )
$29.99
These Standard Motor Products replacement coolant level sensors provide the PCM with an analog input signal, along with an oxygen sensor, to go into the closed loop mode of controlling the fuel mixture. They are designed to provide actual engine temperature information to the PCM. The PCM then feeds the sensors a fixed reference voltage of usually 5 volts when the engine is on. The resistance in the sensors is high when cold, and drops as the sensors warm up, to alter the voltage signal back to the PCM. Are you experiencing temperature problems with your vehicle? Try one of these Standard Motor Products replacement coolant level sensors to eliminate any chance of problems.
( 4 )
$7.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$291.99
Hella coolant temperature sensors will maintain your vehicle's information process of detecting your engine's operating temperature. Increased fuel consumption, higher idle speeds, and poor starting could be signaling a problem. Hella sensors provide you with quality direct-fit options that will look and function just as the originals to resolve these issues, and restore your car's performance.
Not Yet Reviewed
$14.99
Modal Header