Availability
Showing In Stock Items. Show All 46 Items.
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 220 )
$504.00
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for remanufactured hard parts. Remanufactured parts may look different from factory parts but perform the same because Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * All new O-rings and lip seals ensure no leaking and long-lasting performance * 100 percent computerized testing for quality and reliability * All critical components are triple-tested to ensure product reliability * 100 percent appearance-inspected to ensure your satisfaction * Rust-inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake, or peel * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
( 340 )
$344.99
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 51 )
$275.00
Air Lift Load Controller 1 systems are the ultimate in heavy-duty air control. They're designed for heavy applications such as motor homes, towing fifth wheels, and commercial use. These systems work great on class A and C motor homes, and adjust easily for changing road and load conditions.
( 18 )
$280.99
Brothers Trucks offers power steering pumps for a variety of applications, including many Chevy and GMC trucks from the 1940s, '50s, '60s, '70s, and '80s. These pumps are for customers who are converting their truck to power steering. They come with the double pulley installed and fit 350 SBC with long or short water pump. Additional notes: * Saginaw style power steering pump * Includes double V-belt pulley * Black in color
Not Yet Reviewed
$261.95
Dorman leaf springs are perfect replacements for your old, worn-out springs. Built to the original specs, these leaf springs feature a black powdercoated finish to resist corrosion due to the elements to help prolong service life and include the required rubber bushings for installation. Fix up that old, tired suspension with help from Dorman and these replacement leaf springs.
( 45 )
$283.99
—
$528.99
Cardone New steering boxes are "built better from the start." The same reverse-engineering experience Cardone has gained from over 45 years of remanufacturing is the foundation of their Cardone CSE Technology. Their engineers incorporate improvements into the new boxes to prevent the "where and why" of typical failure. Cardone New steering boxes feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 20 )
$428.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 101 )
$394.99
—
$423.99
Air Lift LoadLifter 5000 air spring kits feature 2-ply reinforced commercial-grade bellows, which mount between the spring and frame. They can be inflated from 5 to 100 psi to level loads up to 5,000 lbs. on large pickups and vans, wreckers, ambulances, motor homes, and commercial trucks. LoadLifter 5000 kits include bellows, air lines, fittings, brackets, mounting hardware, and instructions. They're engineered for installation in about two hours. Order the spring helper kit designed for fitment with your make and model.
( 265 )
$357.99
Yukon Gear & Axle spindles are precision-machined from high-quality steel to provide a long, strong service life. They're manufactured to tight tolerances and feature a deeper heat-treat at the bearing journals than OEM for greater strength. Order the replacement recommended for your axle model.
( 22 )
$316.99
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Tuff Stuff Performance offers a complete line of replacement pumps designed to look as great as they perform! The units are available in a variety of textures, finishes, and colors to set your engine bay apart from others at a car show or the race track. Manufacturing custom-finished components for hot rods and custom cars is Tuff Stuff Performance's business. Find the pump style and fitment for your vehicle, and never be without efficient power steering.
( 160 )
$280.99
—
$362.99
Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.
Not Yet Reviewed
$514.99
RoadActive Suspension systems are the only rear leaf spring suspension upgrade that converts basic "passive" leaf spring suspension to mechanical "active" suspension. Their systems absorb and dissipate load force energy, resulting in significantly improved vehicle stability, balance, traction, and control … all with or without a load. RoadActive Suspension systems add critical strength to leaf springs, but will not compromise ride quality. They're like helper springs, sway bars, and traction bars, all in one package. The systems are available for thousands of vehicles from the 1960s and up. Order the kit recommended for your application. Features include: * Improved driver control, safety, and stability, with or without a load * Eliminate sway and reduce roll on corners * Reduce axle wrap and wheel hop * Strengthen rear leaf springs for towing or hauling maximum loads with maximum safety * Absorb loads, rather than resist them, for a much more comfortable ride * Eliminate the need for fitting extra leaves or stiffening the springs * Better handling and control in windy and rough road conditions * Easy to install--can be fitted in approximately 60 minutes with no welding or drilling * Secured under their own coil spring tension
( 34 )
$539.00
Upgrade the suspension of your Jeep, truck, or SUV with BDS Glide-Ride front and rear leaf springs. They offer improved handling through any conditions and provide added lift height over stock springs, making them perfect for hitting the trails, towing a heavy load, or just daily driving. Built to outperform, BDS Suspension Glide-Ride leaf springs have a multi-leaf progressive spring rate that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design and anti-friction pads. Adding BDS Glide-Ride leaf springs to your vehicle will reduce axle wrap and provide flexibility throughout the suspension cycle. Choose the set designed for your vehicle. Note: Bushings are required and must be purchased separately.
( 5 )
$261.95
—
$279.95
Softride lift leaf springs from Skyjacker are designed to give you all of the rugged off-road handling you need, while providing the smooth street riding characteristics that you demand. They're constructed as multi-leaf packs, so their GVW rating and load-carrying capacity will be equal to or greater than those of the vehicle's original equipment. Only high-quality American steel is used in their construction, so you can be assured that you're getting a dependable product.
( 24 )
$468.31
—
$535.37
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 12 )
$399.99
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 57 )
$255.99
—
$274.99
Hellwig Pro Series progressive rate helper spring kits are fully adjustable to ensure improved side-to-side leveling control. Designed to virtually eliminate sagging, they are made from high-quality alloy spring steel, hot-formed and heat-treated for strength and durability. Hellwig Pro Series helper springs include all mounting hardware needed for installation.
( 59 )
$446.06
Superlift Superide lift kit shock boxes include a set of four Superide shocks to match your lift kit. These shocks are designed to provide the ultimate in ride quality, durability, and longevity. They feature 10-stage, velocity-sensitive valving for maximum control, on or off-road, without sacrificing a comfortable ride. Finish your lift project with Superlift lift kit shock boxes. Order the set recommended for your application.
Not Yet Reviewed
$279.99
Tuff Country EZ-Ride leaf springs are tapered, snub-rolled, and preset for the most comfortable ride available in lifted, positive-arch leaf springs. PTFE inserts are also used to help with ride characteristics as well as to reduce squeaking. Heavy-duty applications are also available to help accommodate a winch or for heavy towing applications. Tuff Country is the originator of the 3 and 4-leaf EZ-Ride leaf springs. Tuff Country's research has proven that using thicker steel per leaf and fewer leafs results in a much smoother ride than using the standard thinner steel and more leafs.
( 13 )
$258.99
—
$471.99
Take your suspension kit to the next level with Rough Country replacement leaf spring kits. Constructed from high-quality materials and designed specifically for the weight of your vehicle, these enhanced replacement spring kits will provide a factory-like feel while retaining your suspension lift height. Rough Country replacement leaf springs offer easy bolt-on installation and include bushings. Select the kit designed for your vehicle. Features and benefits: * Added lift height and ride comfort * Durable and off-road ready -- Multi-leaf design and spring pads reduce friction and maximize comfort -- Leaf pack utilizes tapered leaves for improved flexibility at their ends * 100 percent bolt-on installation -- Use stock hardware to equip vehicle with kit replacement * Backed with a 5-year replacement warranty towards manufacturer defects
( 5 )
$399.95
—
$459.95
Superlift lift leaf springs feature a spring rate that is reduced as much as possible, to emphasize suspension travel and a more compliant ride. These leaf springs are designed for your specific application, to ensure the lift and tire clearance you're looking for.
( 64 )
$279.99
Superlift shackle flip kits can to turn the factory rear tension shackle into a compression shackle for up to 4 in. of lift without using blocks. These shackle flip kits improve pinion angle and reduce or eliminate the need for corrective degree shims. Eliminating or reducing the height of the lift blocks helps to reduce axle wrap and allows for the use of a flatter spring for improved ride quality. The install is easy--just bolt them up to the factory holes with hardware for a stronger-than-stock mounting system.
( 24 )
$329.99
Proven on the race track, as well as on the street, these Hyperflex bushing kits from Energy Suspension allow you to upgrade your mushy rubber bushings to high performance polyurethane replacements. All vehicles, whether domestic or import, will achieve a higher level of handling performance. Hyperflex components will not break down or deteriorate from exposure to oils, undercar chemicals, or atmospheric conditions. They also improve appearance over stock and are available in different colors to suit all of your needs, from show to go. Find the front and/or rear bushing kit designed for fitment with your specific vehicle.
( 138 )
$250.20
—
$388.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
