Availability
Showing In Stock Items. Show All 1047 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1970 )
$118.95
—
$210.95
$107.05
—
$189.85
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$1,999.95
—
$2,149.95
$1,798.95
—
$1,933.95
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
$49.05
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$499.95
—
$699.95
$357.95
—
$628.95
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 216 )
$259.95
$233.95
On Sale
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$349.95
$314.95
On Sale
Coker Classic Star Series Whitewall tires are modern radials with best-in-class speed, load and traction ratings. They feature stylish whitewalls, which are built into the tires from Day One—delivering the perfect look for your classic car. The whitewalls fit many American and European classic cars from the 1960 and earlier. Star Series tire ratings help them to provide excellent treadwear, traction, and temperature control. Another best-in-class rating is the T speed rating (118 mph), as well as XL load rating, thanks to a reinforced sidewall. The low-noise tread looks and performs nicely; and these tires are DOT approved and E-marked for the European market. You won't find a better whitewall radial tire on the market! * Best-in-class traction: Star Series tires feature Grade-A traction and temperature ratings, meaning you can expect excellent handling and traction on wet and dry roads. They're engineered to outperform all other whitewall tires, and feature a 480 AA UTQG rating for long-lasting tread life and unbeatable traction. This makes your classic car safer to drive in all weather conditions and improves your driving experience. * Star Series tires are engineered with a reinforced sidewall to better support the weight of classic cars. This reinforcement gives the tire Extra Load (XL) rating, meaning added safety and a long-lasting sidewall that won't break down over time. * Star Series tires feature a genuine wide whitewall sidewall style. This means that the bright white rubber is added directly to the tire sidewall during initial construction of the carcass, resulting in a truly integrated, high-quality product after vulcanization. Wide whitewall tires were a very popular choice from the 1930s through the end of the 1950s, and were eventually phased out of mainstream production by 1962. Originally, wide whitewall tires featured a bias ply construction, but now Coker Tire offers them in original style bias ply and modern radial construction. * T Speed rated: Up to 118 mph (190 km/h). Often required OE for higher performance trim level classic automobiles. * Available in a wide range of sizes
( 35 )
$178.00
—
$282.00
$160.20
—
$253.80
On Sale
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 137 )
$358.00
—
$819.99
$322.20
—
$696.99
On Sale
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$355.00
—
$365.00
$319.50
—
$328.50
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
—
$699.95
$403.95
—
$628.95
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 642 )
$71.75
—
$499.95
$64.55
—
$448.95
On Sale
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$275.00
—
$325.00
$247.50
—
$292.50
On Sale
B&M automatic StarShifters normally work like standard detent shifters, but by simply pulling the lockout trigger and moving the stick to low, they become full ratchet action shifters for quick gear changes. With a cable-operated mechanism, a universal floor-mount console, NHRA/IHRA-approved reverse lockout, a neutral safety switch, and a polished aluminum T-handle, the StarShifters are at home on the street or the track.
( 154 )
$340.95
$306.85
On Sale
If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.
( 388 )
$575.99
—
$875.99
$518.39
—
$788.39
On Sale
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
$269.95
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
—
$465.95
$113.35
—
$302.87
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$61.45
—
$79.09
$55.35
—
$71.15
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 222 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
If you're into aggressive street driving and occasional track driving, McLeod Street Extreme clutch kits hold up to 700 lbs.-ft. of torque with street tires and moderate engine mods. These SFI-approved packages are the perfect upgrade for high-horsepower Mustangs (and other cars) that need reliable shifting on the street and the track. They feature a dual-faced ceramic friction disc, high clamp load pressure plate, pilot tool, throwout bearing, and pressure plate bolts (where applicable). You can run your pony with complete peace of mind. Street-friendly and track-proven, a McLeod Street Extreme clutch kit is your best decision. Order the model recommended for your application.
( 48 )
$375.00
—
$425.00
$337.50
—
$382.50
On Sale
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 505 )
$79.95
$71.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
