Availability
Showing In Stock Items. Show All 43 Items.
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 132 )
$259.00
—
$294.00
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 102 )
$299.00
—
$495.00
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$369.00
—
$409.00
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$268.99
—
$540.89
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$475.95
—
$515.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$495.98
—
$559.77
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
Richmond Gear is the leading manufacturer of professional-quality, high performance ring and pinion sets. The superior quality of these gear sets is the result of years of racing development, outstanding design, and state-of-the-art manufacturing methods. Richmond also offers these gear sets in a lightened version for the weight-conscious enthusiast. Their lightened ring and pinion sets feature an outstanding rotating weight loss of up to 6 lbs., ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 308 )
$524.99
—
$531.42
Lighter means quicker! Heavy flywheels rob power from your engine and reduce its ability to rev and respond quickly. McLeod's aluminum flywheels can take a big bite out of those losses. They're made from quality aluminum and come with steel-insert friction surfaces. Ring gears are held in place with welded and riveted tabs, and all flywheels are drilled to accept balancing weights for externally balanced engines.
( 8 )
$495.00
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$499.95
Hays Classic clutch kits are the original Hays clutch! These conversion kits are the newest 26-spline version in the Hays clutch lineup, and are designed to work in conjunction with a modern 5-speed or 6-speed transmission swap. They feature an organic disc with an upgraded pressure plate for increased holding power over stock. They're designed for stock cars and trucks, or ones with minor performance bolt-ons, such as headers, intake, and exhaust. For clutch kits that are street-friendly, smooth, and reliable, consider the Hays Classic line of clutches—they're a great choice for your favorite muscle car, Jeep, or truck! Order the kit recommended for your vehicle application. Hays Classic conversion clutch kit features: * Includes 26-spline clutch disc for use with most 5-speed and 6-speed conversions * Steel back clutch disc features heavy-duty hub spring assembly for increased load capacity * Great drivability for power levels up to 400 hp * Clutch kit is painted signature Hays Classic orange color * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded pressure plate gives you increased holding capacity over a stock clutch * Clutch kits come complete with pressure plate, disc, release bearing, and alignment tool (unless otherwise noted)
( 1 )
$499.95
—
$515.95
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 337 )
$288.99
—
$366.99
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 9 )
$293.99
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 145 )
$449.99
—
$457.99
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
Spools are an alternative to a locker for traction and performance enhancement. Motive Gear full spools are a favorite of off-road competitors, dirt track racers, and drag racers. A differential with a spool setup delivers equal power and traction to both left and right-side rear wheels. Spool solutions are less expensive than lockers and weigh less. Motive Gear offers a full line of full spools in the most popular applications for differential modification. Motive Gear spools come in your choice of steel, aluminum, lightweight, and ultra lightweight metal compositions.
( 19 )
$289.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$484.99
On Sale
Hays billet aluminum flywheels are popular with many road racers and serious drag racers--shouldn't you have one? They are manufactured from certified billet material to handle the stress of high rpm and the severe punishment of racing. Upgrade to a precision-machined and engineered Hays billet aluminum flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * Forged from 7075 T-6 or 6061 T-6 alloy for weight reduction and excellent heat dissipation * Forged, heat-treated steel ring gears and replaceable 1045 steel friction surfaces attached with high-grade fasteners * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch but will accelerate faster through the gears.
Not Yet Reviewed
$667.95
$367.95
PRW billet aluminum flywheels are SFI-rated and engineered to handle extreme-duty applications, as well as take the punishment of today's high-horsepower engines. CAD engineered and precision CNC-machined to strict tolerances, PRW billet aluminum flywheels combine top-quality and reasonable pricing to deliver the best for you and your vehicle.
( 1 )
$420.83
—
$422.92
These Powertrax no-slip traction systems are the latest design in traction-adding differential technology. They combine the smooth operation of a limited-slip differential with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring designs reduce the backlash and, therefore, the driveline windup. Only ultra-strength material that is 67 percent stronger than titanium is used. Installation is simple because no ring and pinion setup is required. In addition, no special tools or oils are needed. Step-by-step, model-specific instructions are provided with every kit.
( 81 )
$468.99
On Sale
These lightweight flexplates by QuickTime are designed to significantly improve your engine acceleration and deceleration. They are constructed of quality HSLA 60 grade steel, zinc plated for corrosion protection, and are SFI 29.1 certified.
( 1 )
$263.95
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 33 )
$451.49
—
$482.99
PRW billet steel flywheels are CAD-engineered, and precision CNC-machined from 1045 billet steel. Purpose built to handle extreme-duty applications and the punishment of high-horsepower engines, they are balanced and carefully inspected throughout the manufacturing process to ensure you receive the quality you expect from PRW. These billet steel flywheels feature removable counterweights for versatility and are SFI-certified.
( 7 )
$302.18
—
$399.63
Motive Gear offers differential carrier cases for thousands of applications from 1955 and up. These replacements feature rugged steel construction and will accept all of your factory internal parts without any modifications. Models are available for countless differential case design types, including Chrysler, Dana, Ford, GM, and Toyota. Keep your wheels turning effectively; order the case and options recommended for your vehicle.
( 24 )
$389.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
