Availability
Showing In Stock Items. Show All 115 Items.
Summit Bucks
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 544 )
$56.99
—
$113.99
Summit Bucks
OEM replacement Fel-Pro head gaskets are ideal for stock rebuilds on street-driven cars and trucks. These seals are available in a dozen materials, with different bores, thicknesses, and compressed volumes. They're designed for precise fitment on specific engine applications. (Fel-Pro head gaskets are not intended for racing use.)
( 252 )
$15.99
—
$43.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 546 )
$85.48
—
$235.73
Summit Bucks
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 544 )
$15.99
—
$23.99
Summit Bucks
Fel-Pro water neck gaskets are available for hundreds of applications, including most engine coolant outlets and thermostat housings. These inexpensive seals are offered in a variety of materials and configurations. Avoid unwanted leaks. Order the gaskets recommended for your vehicle and engine family.
( 270 )
$3.99
—
$12.99
Mr. Gasket Ultra-Seal valve cover gaskets may be the most advanced, highly tested, and real-world proven gaskets on the market today. They're made from high-density cork-and-rubber gasket material. This construction means that they are non-shrink and non-stick, don't have to be re-torqued, and can be reused. Their extra thickness also adds a little clearance between the valvetrain and the valve cover.
( 150 )
$41.64
—
$49.95
Summit Bucks
Fel-Pro water pump gaskets are offered in a variety of materials and configurations. These replacements are available for thousands of applications. Order the model or set recommended for fitment with your vehicle and engine family.
( 158 )
$3.99
—
$7.99
Summit Bucks
Fel-Pro offers fuel pump gaskets for thousands of applications. These economical replacements are available in a variety shapes and materials. Order the model recommended for your vehicle and engine family.
( 93 )
$3.99
—
$4.99
The leak stops here! Cometic MLX head gaskets feature a unique integrated "stopper" layer for optimum combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. The MLX head gaskets, like their MLS counterparts, are multi-layer stainless steel for increased strength—and require no sealants or re-torquing. Dozens of models are available; order the MLX head gaskets designed to maximize your engine's power and performance.
( 18 )
$113.09
—
$148.43
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 453 )
$28.95
—
$34.95
Summit Bucks
Fel-Pro rear main seals are ideal for stock rebuilds or street driven cars and trucks. These OEM-style replacement seals are not intended for race applications. They're available in a variety of materials and configurations for fitment on specific vehicles and engine families.
( 167 )
$12.99
—
$21.99
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 70 )
$23.37
—
$48.08
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$71.67
—
$129.72
Prevent oil leaks, pressure loss, and aeration of your oil with our Summit Racing™ copper oil pump gaskets. The gaskets' soft copper construction will conform to minor surface irregularities ensuring a positive seal between the rear cap surface and oil pump mounting flange. They're cheap insurance that solves a common issue that usually gets over looked.
( 51 )
$4.99
—
$5.99
Mr. Gasket head gaskets are ideal for stock rebuilds and mild performance applications. They're designed to offer greater sealing characteristics than OEM, plus longer life--and they're more affordable, too!
( 46 )
$37.77
—
$79.19
With their built-in integral combustion and coolant seals, patented SCE ICS Titan copper self-sealing head gaskets require no additional sealants. That means that you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal and to prevent blowout. The built-in combustion seals, found only on the ICS Titan gaskets, take the place of the O-ringed blocks or heads, allowing for the use of power adders or extreme static compression ratios. The gasket body is split at the bore opening to allow for the insertion of a stainless wire O-ring, forming a primary seal, with upper and lower flanges forming a secondary combustion pressure seal. Recommended for naturally aspirated gas or methanol racing engines, these one-of-a-kind copper ICS Titan head gaskets are suitable for medium-to-heavy turbocharged, blown, or nitrous-injected engines as well. For ultimate sealing strength every time, introduce your engine to SCE ICS Titan copper head gaskets.
( 8 )
$136.07
—
$216.43
Summit Bucks
Fel-Pro offers distributor base gaskets for thousands of applications. They're available in a variety of materials to complement cast iron and aluminum intake manifolds. The gaskets can be used in conjunction with any shins or housing base spacers made to correct the distributor's overall height. Order the replacement model recommended for your vehicle and engine family.
( 42 )
$2.99
—
$4.99
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$32.18
—
$403.01
On Sale
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They're precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
( 67 )
$48.59
$26.72
—
$48.61
Summit Bucks
Fel-Pro valve stem seals are available in a variety of sizes, styles, and materials. These small components perform a valuable role—controlling the lubrication of the valve stems as they slide in the valve guide. Too little oil causes stem and guide wear; too much increases oil consumption and can cause a buildup of carbon. This can lead to valve seat damage and early valve grind. Order the replacement set recommended for your vehicle and engine application.
( 107 )
$15.99
—
$35.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$22.99
—
$32.99
Summit Bucks
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$56.99
—
$92.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$61.99
—
$202.99
Your budget doesn't need to take a hit every time you buy gaskets; and no, you don't need to sacrifice quality. SCE AccuSeal E series is their common sense gasket line for engine builders, racers or weekend warriors that want a better gasket as a reasonable price. These SCE AccuSeal E valve cover gaskets are designed to stand up to high temperatures and pressures, and deliver a precise fit. Available for your application, SCE AccuSeal E gaskets offer economy and performance for you and your wallet.
( 14 )
$25.93
—
$26.68
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
