CHEVROLET EXPRESS 1500 | Summit Racing

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.9 out of 5 stars ( 10 )

$3,625.99

PowerStop Z36 Truck and Tow Brake Upgrade Kits

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits. Features and Benefits<ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li>Stainless-steel pad shims resist the increased temperatures common on heavy duty applications</li><li>Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE</li><li>Drilled & Slotted performance rotors provide maximum cooling</li><li>Bolt-on upgrade for stock brakes, no modifications necessary</li><li>Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant</li><li>Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li>Rotors are zinc plated for maximum protection against rust</li><li>Buy with confidence from the originator & industry leader of brake kits</li></ul>

4.77 out of 5 stars ( 2809 )

$280.99

—

$376.99

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.48 out of 5 stars ( 66 )

$2,295.99

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.78 out of 5 stars ( 9 )

$2,988.99

Mishimoto Performance Radiators

Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable

4.42 out of 5 stars ( 338 )

$602.95

Odyssey Drycell Batteries

Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.

4.86 out of 5 stars ( 235 )

$429.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.72 out of 5 stars ( 79 )

$2,413.99

—

$3,662.99

Tilton ST-246 Twin Disc Clutch Kits

Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque

4.11 out of 5 stars ( 9 )

$1,487.50

—

$1,576.75

PowerStop Z23 Evolution Sport Brake Upgrade Kits

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits come with everything you need--pads, rotors, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled and slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily driver the easy and affordable performance upgrade it deserves with PowerStop Z23 Evolution Sport brake upgrade kits.

4.72 out of 5 stars ( 3095 )

$310.99

VEGE Remanufactured Cylinder Heads

VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.

3.79 out of 5 stars ( 47 )

$305.99

EBC 3GD Series Sport Rotors

EBC 3GD Series Sport rotors are dimpled and slotted and precision-machined using premium-quality castings. Designed with wide-aperture scraper slots and blind-drilled holes, these 3GD rotors draw cooler air in and reduce temperatures for greatly reduced brake fade. Plus, their dimpling helps them to avoid stress cracks. Able to expel dirt, dust, and gases, EBC Sport rotors also maintain flat and parallel pad wear for better pad contact and better braking. These high performance rotors are available in a sporty silver corrosion resistance finish that not only looks great, but also prevents corrosion. Enhance the performance and looks of your car with EBC 3GD Series Sport rotors. Additional information: * Dimpled rotors were invented by EBC; often imitated because of its pad degassing without "through drilling" holes which promote rotor cracks * 3GD rotors passed European R90 brake safety tests and were shown to run 100 degrees F cooler than non-slotted rotors * Directional--the sweeping grooves and spotted pattern should point to the rear of the vehicle * All slotted rotors increase in air noise as the rotor passes beneath the pads under normal driving and braking; EBC's sister USR Sport rotor range is much quieter yet offers similar performance * Solid rotors are also available for some vehicle makes and models

4.47 out of 5 stars ( 186 )

$293.91

OE Wheels Replacement Wheels

Over the past 21 years, OE Wheel Distributors has forged relationships with some of the world's highest quality, ISO9001 certified wheel manufacturers. Many of these same facilities also produce wheels for some of the largest names in the US domestic OEM brand lineup. OE Wheels replacement replica wheels are designed, engineered, manufactured, and tested to adhere strictly to all SAE-J2530 requirements and are backed by lifetime structural warranty. These single wheels are offered in several finishes, each a multi-step process to deliver a beautiful, durable wheel that can stand the test of time. Like all quality replica wheels, they should be washed with soap and water only (no harsh chemicals), and dried with a clean microfiber cloth. The center cap included, and the factory center cap should be interchangeable. Choose the wheel designed for your vehicle. Please check the fitment tab for specific year-make-model applications.

4.82 out of 5 stars ( 17 )

$277.00

EBC Stage 5 Superstreet Disc Brake Kits

Upgrade the brakes on your ride with EBC Stage 5 Superstreet disc brake kits. They include a pair of EBC dimpled and slotted rotors, featuring a great looking and corrosion-resistant GEOMET coating—plus a set of Yellowstuff Aramid brake pads. These kits are available for fitment on thousands of applications from the 1950s and up. Stop quicker, stop better, with EBC!

4.6 out of 5 stars ( 57 )

$406.37

EBC Stage 3 Truck and SUV Disc Brake Kits

It's time to upgrade the brakes on your "mean machine" with EBC Stage 3 truck and SUV disc brake kits. They include a pair of EBC 3GD Series Sort GEOMET-coated, slotted and dimpled brake rotors, and a set of compatible EBC Greenstuff 6000 Series light truck and SUV brake pads. Now, you'll be able to "slow your roll" more efficiently and stop in a shorter distance! Front or rear kits are available for fitment on thousands of applications from the 1960s and up.

4.45 out of 5 stars ( 113 )

$379.68

Baer Brakes Baer Claw Performance Rotors

Baer Brakes Baer Claw performance rotors improve your vehicle's braking performance and overall appearance. These direct replacement rotors feature a cross-drilled and slotted friction surface, providing an escape route for the gasses and dust that are produced during braking. This translates to a consistent pedal feel and reduced brake fade. Each pair of cast iron rotors are zinc-plated, providing a brilliant finish behind open center wheels. Baer Claw rotors are available for over 500 applications. Features and benefits: * OEM diameter, direct replacement rotor upgrade * Improved brake performance * More consistent pedal * Reduced brake fade * Brilliant finish for enhanced visual impact and appearance * Simple, bolt-on installation * No bleeding of brakes needed * Enhanced performance and appearance at an affordable price * Pair with Baer Claw performance brake pads for the ultimate stopping power

4.25 out of 5 stars ( 4 )

$228.95

—

$314.95

PowerStop Evolution Drilled and Slotted Rotors

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Evolution drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance on your car, truck, or SUV. They are precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gas, debris, and moisture to keep a clean friction contact patch on the rotor surface providing smooth, safe braking. Rotors without an integrated bearing are covered in silver zinc dichromate plating resists rust and corrosion. With the direct OE fit of PowerStop Evolution drilled and slotted rotors, upgrading the looks and stopping power of your vehicle has never been easier.

4.63 out of 5 stars ( 918 )

$327.99

Enginetech Remanufactured Crank Kits

Enginetech offers remanufactured crank kits for a variety of Chevrolet, GMC, Saturn, Isuzu, Chrysler, Dodge, Jeep, Mitsubishi, Ford, Ram, Subaru, and Toyota engines from 1982 and up. These engine components include a crankshaft, along with the matching set of main and rod bearings needed to properly install and support it within the engine during a rebuild. Crankshafts convert the pistons' reciprocating motion into rotational motion, which powers the vehicle. These remanufactured models are available in forged steel, nodular iron, or cast iron—in a range of stroke and other options.

Not Yet Reviewed

$434.99

USA Standard Gear Ring and Pinion Gear Kit Packages

USA Standard Gear ring and pinion gear kit packages provide all you need to re-gear your front or rear differentials. They include ring and pinion sets along with master overall kits to fully complete your job. Save time searching for components—and save money by purchasing everything at the same time. Service the front or rear of your rig with a ring and pinion gear kit package from USA Standard Gear.

4.4 out of 5 stars ( 5 )

$882.99

PowerStop Z36 Truck and Tow Evolution GEOMET Coated Brake Upgrade Kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes—no matter where or how they use their vehicle. The PowerStop Z36 Truck and Tow Evolution GEOMET coated brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. These brake pad and rotor kits come with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Z36 Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with fully coated rotors to protect against rust and corrosion. PowerStop Z36 Truck and Tow Evolution coated brake upgrade kits are the optimal solution for vehicles towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail. Select the upgrade kit designed for your vehicle application.

Not Yet Reviewed

$271.99

—

$491.99

ATK High Performance Chevy LM7 5.3L 385 HP Long BLock Crate Engines

With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385

4.93 out of 5 stars ( 15 )

$4,189.99

EBC Stage 2 Sport Disc Brake Kits

EBC Stage 2 Sport disc brake kits are sure to get your ride stopped more effectively than you ever imagined. They include a pair of EBC USR Series Sport GEOMET-coated, slotted brake rotors—and a set of EBC Greenstuff brake pads. The components are matched up together to help "slow your roll" the right way! These replacement or upgrade kits are available for fitment on thousands of applications from the 1960s and up.

4.57 out of 5 stars ( 30 )

$486.39

—

$537.94

EBC Stage 14 Kits Greenstuff Elite Brake Pads and RK Rotors

If you have a truck or light SUV and are far from thrilled with its brake performance, you've come to the right place. EBC offers Stage 14 kits with Greenstuff Elite brake pads and RK rotors for more bite. These combos make a great choice for individuals desiring a modest brake improvement for normal speeds on any truck or light-duty SUV. The high-efficiency Greenstuff brake pads are built with aramid fiber, fully shimmed, slotted, and chamfered—and feature EBC's patented break-in coating for fast pad seating after installation. Premium RK rotors are direct fit OEM replacements with "thermic black" anti-rust surface coating, fully balanced and runout-tested for smoother braking. Caliper lube is also included.

4.18 out of 5 stars ( 22 )

$281.83

CURT Receiver Hitches

CURT receiver hitches are carefully designed and constructed for flawless performance, fit, and finish. They are built from the highest quality materials with precision robotic welding that ensures superior strength and fitment. The hitches feature WeatherTite construction to seal the main body from the elements, an open-back receiver for easy cleaning, and a step pad on most applications. Other features include seamless one-piece Pro Design collars, for rust resistance and added strength, and a durable EverGloss powdercoated finish that is available in a variety of colors for many models.

4.75 out of 5 stars ( 1788 )

$376.99

Sherman Replacement Bumpers

Sherman replacement bumpers are designed for OE-style fitment. They're made of high-quality steel and are offered in a choice of finishes, including chrome and black, for both the front and rear of your vehicle. Whether you're restoring a car or truck, or you just want to get rid of an old rusted bumper, Sherman bumpers are an upgrade you'll be proud of. For precise fitment, order the model that corresponds with your vehicle application.

4.16 out of 5 stars ( 109 )

$326.99

—

$347.99

CHEVROLET EXPRESS 1500 Parts and Accessories