Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET EXPRESS 1500 Tools & Shop Equipment
Showing In Stock Items. Show All 28 Items.
Summit Racing™ LS Damper Pin Drill Fixtures
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 12 )
$73.99
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$77.55
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$50.99
—
$113.99
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$58.15
—
$64.55
Lisle Injector Seal Installer Kits
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 1 )
$88.99
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$111.99
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Dorman Rear Crankshaft Oil Seal Installers
Dorman rear crankshaft oil seal installers are convenient and valuable tools for use for when replacing the rear main seal cover on specified vehicle applications. These must-have tools ensure the cover is properly aligned on the crankshaft to prevent damage and leaks. The tools machined from low-carbon steel, zinc-plated and then are clear-chromate-coated for durability.
( 1 )
$72.99
AGM Products Brake Reservoir Adapters
AGM Products brake reservoir adapters allow one-person operation to bleed the brakes, unlike the traditional "pump and hold" method that requires a second person, which saves time during brake bleeding tasks. These adapters offer versatility by connecting to various master cylinders, and convenience due to features like 90-degree swivel fittings for tight spaces, which results in a more thorough and reliable bleeding process with a mess-free, secure seal that prevents contamination and spills. Constructed from quality materials, they are built for repeated use in demanding environments. Ergonomic design makes them easy to handle and store when not in use.
( 1 )
$149.99
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$15.99
—
$22.99
SPC Performance Truck/SUV Ball Joint Presses
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
OTC Harmonic Balancer Pullers
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 75 )
$119.99
OTC Injector Seal Installer and Sizer Adapters
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$179.99
BOLT Lock Cylinders
BOLT offers replacement lock cylinders for their toolbox latch retro-fit kits. They will match your factory ignition key when you select a cylinder model recommended for your vehicle/make. The lock cylinders feature an automotive-grade tumbler with a corrosion-resistant zinc core, plus a rugged, weather-resistant exterior. They're made with a stainless steel lock shutter to keep dirt out.
( 7 )
$16.99
SPC Performance Cam Knockout Punches
These SPC Performance cam knockout punches are designed for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. They are made from heavy-duty steel and are perfect for pickup trucks and SUVs.
( 1 )
$85.99
Yukon Gear & Axle Setup Bearings
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
Yukon Gear & Axle Differential Carrier Shim Installation Drivers
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
BOLT Padlocks
BOLT padlocks are the only padlocks that will open with your ignition key. Now, that's really a breakthrough: one-key technology! They feature a hardened zinc-nickel plated shackle, a solid zinc core, and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to prevent picking and bumping. These padlocks have a rugged, weather-resistant jacket to protect your gear and achieve the ASTM's top corrosion resistance rating. Order the model recommended for your vehicle make.
( 20 )
$29.69
Yukon Gear & Axle Pinion Yoke Holders
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$126.99
SPC Performance Camber/Caster Wrenches
These SPC Performance camber/caster wrenches have been designed to make front-end alignments easier and faster. They feature an offset-L design to permit easy access to the mounting bolts. These SPC Performance camber/caster wrenches are available in your choice of SAE or metric sizes.
( 1 )
$47.99
Clearance
Yukon Gear & Axle Differential Carrier Bearings
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
