Availability
Showing In Stock Items. Show All 33 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 36 )
$869.95
—
$1,049.95
$781.95
—
$943.95
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,040.50
—
$1,079.50
$936.45
—
$971.55
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 303 )
$899.95
—
$1,199.95
$808.95
—
$1,078.95
On Sale
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
$926.50
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$899.95
—
$969.95
$808.95
—
$871.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$899.95
$808.95
On Sale
These Summit Racing™ manual transmission shifter and installation kit Pro Packs have been put together to provide your vehicle with quick, precise shifts every time. They feature a Hurst Competition Plus shifter, a shifter ball, and an installation kit for your specific transmission model. If you're ready to upgrade your shifter, then pick up one of these Summit Racing™ manual transmission shifter and installation kit Pro Packs and make smooth, accurate gear changes, shift after shift.
( 33 )
$899.90
—
$935.90
$808.90
—
$897.30
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$949.95
—
$999.95
$853.95
—
$898.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$899.95
$763.95
—
$808.95
On Sale
Hooker Blackheart headers deliver premium performance with a reasonable price. Hooker utilizes stainless steel and mild steel for construction of these headers designed for optimum flow, maximum velocity, and ground clearance. Whether you're looking for shorty headers or long tube, Blackheart headers are available in a variety of styles and sizes to fit a wide selection of vehicles from luxury rides to sports cars, modern muscles, and even trail-blazing rigs. When it's time to tear the heart out of the competition, choose Blackheart from Hooker!
( 51 )
$849.95
—
$1,059.95
$763.95
—
$952.95
On Sale
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
$842.85
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
$988.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$849.95
—
$949.95
$763.95
—
$853.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 228 )
$999.95
$898.95
On Sale
These Flowmaster Scavenger Series Elite headers open up airflow for serious added power. All Scavenger Series Elite headers are made of high-quality stainless steel and have been polished ceramic coated. They are available in several styles, such as shorty, full-length, and block hugger to accommodate a large variety of vehicles. They have a standard flange design and include bolts and gaskets for installation. Get yourself a set of these Flowmaster Scavenger Series Elite headers to keep yourself ahead of the competition.
( 68 )
$979.95
$880.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$899.95
—
$949.95
$808.95
—
$853.95
On Sale
Pypes High Tuck header/crossmember-back exhaust systems allow for the most ground clearance of any A-body system on the market. The X-pipe pushes the mufflers up into their installation pockets and the tailpipe sits higher coming out of the muffler. No more bottoming out! Pypes High Tuck header/crossmember-back exhaust systems are designed to boost your car's performance to the next level—you will get more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions. Their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
Not Yet Reviewed
$806.79
$766.79
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 29 )
$812.79
—
$864.79
$772.79
—
$824.79
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$999.95
—
$1,049.95
$898.95
—
$943.95
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,065.50
—
$1,079.50
$958.95
—
$971.55
On Sale
High performance Quick Fuel Black Diamond Q-Series 2-barrel carburetors have been engineered for circle track applications. They feature a high-flow aluminum main body with centered venturi for improved fuel distribution and efficiency. An anti-siphon check valve in the main body helps to reduce pump pullover, and the straight leg boosters enable higher airflow. Q-Series carbs have changeable emulsion bleeds and power valve channel restrictions for better tuning capabilities, as well as adjustable idle mixture screws, power valve blowout protection, and built-in dual sight glass windows for easy float adjustment. The unique PTFE coating provides a highly durable black satin finish; it's impact- and scratch-resistant, and impervious to underhood chemicals. This PTFE coating also offers a 6 percent reduction in fuel temperature, further enhancing your vehicle's performance.
Not Yet Reviewed
$949.95
$853.95
On Sale
B&M Pro Bandit shifters are the ultimate combination of design, function and sheer performance. Pro Bandit shifters feature narrow body construction with an easy-to-operate, gate-type mechanism for consistent shifts, round after round. CNC machined from 6061-T6 aluminum, Pro Bandit shifters are then polished and clear anodized for corrosion resistance and great looks. Other features include a reverse lockout that meets both NHRA and IHRA requirements, a built in neutral safety switch, and a rear exit shifter cable.
Not Yet Reviewed
$899.95
$808.95
On Sale
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
$1,035.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
