Availability
Showing In Stock Items. Show All 105 Items.
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 32 )
$335.99
—
$356.99
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$6.99
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$455.74
—
$993.98
Summit Bucks
ACDelco offers GM Genuine Parts automatic transmission clutch housing thrust bearings for a wide range of Chevrolet, Oldsmobile, Pontiac, and Saturn applications. These OE replacements are designed, engineered, tested to rigorous standards, and backed by General Motors. Order the model recommended for your vehicle.
Not Yet Reviewed
$27.99
Summit Bucks
ACDelco automatic transmission oil pan magnets are simple to use—just place them in the transmission oil pan and let them work their magic. The attractors will capture small pieces of metal before they can plug the oil filter or damage the transmission. Quality manufactured to fit your vehicle, ACDelco automatic transmission oil pan magnets will provide the same durability and service life that you expect from a General Motors factory component. Order the model recommended for your application.
( 3 )
$14.99
These Timken automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 6 )
$6.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 369 )
$291.99
—
$351.99
Summit Bucks
ACDelco GM Genuine Parts torque converter pulse width modulation valves are manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended to deliver the peace of mind that fit, form and function is of the highest standards. Get the factory parts you need from the same source as General Motors with ACDelco GM Genuine Parts. Order the model designed for your vehicle application.
Not Yet Reviewed
$60.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$24.99
Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.
( 5 )
$21.99
—
$28.99
Summit Bucks
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 696 )
$87.99
—
$114.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$73.99
—
$95.99
TransGo valve body repair kits give you the components needed to restore proper shifts and correct other problems with your automatic transmission. They will help correct cold rough shifts, downshift problems, long shifts, hard or soft shifts and lockup problems. Repair your automatic transmission with TransGo valve body repair kits.
( 8 )
$102.86
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$4.99
LuK Clutch flywheels are factory replacements for your stock components. They are perfectly balanced and precision-machined to improve clutch performance and reduce vibration. Designed by LuK's development team, they match the products to the special requirements of your vehicle, exceeding OE standards and specifications. Choose the disc diameter and ring gear tooth quantity needed for your application.
( 134 )
$117.99
—
$213.99
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$683.62
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$104.99
—
$234.99
ATP automatic transmission filter kits include everything you need for a fast, efficient filter change. They include all gaskets, filters, and other components that you might require. These replacement filters are specifically designed for your transmission; therefore, improper fitment is never an issue! Order the kit recommended for your application.
( 109 )
$30.79
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$423.19
—
$866.32
Replace your worn-out concentric slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The concentric slave cylinder (CSC) combines the clutch release bearing and the slave cylinder to an integrated unit. As a result, the release fork between the clutch release bearing and the slave cylinder as well as the respective bearing points are not required. Assembly takes place directly on the transmission. All Sachs concentric slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model designed for your application needs.
Not Yet Reviewed
$133.99
Did you know that most manual transmission vehicles have two master cylinders? One is for the brakes, and the other works with the clutch. Dorman clutch master cylinders can help cure hard shifts, mushy clutch pedals, and useless pedals lying down on the job. They deliver increased performance and durability. Their industry-leading application coverage is second to none. If you want your manual transmission performing at optimum levels, replace your original clutch master cylinder with an upgrade from Dorman!
( 27 )
$121.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 81 )
$78.99
—
$86.99
Summit Bucks
ACDelco GM Genuine Parts manual transmission components are GM-recommended parts to service your GM vehicle. Manufactured for many makes and models of GM cars, light-duty trucks, and SUVS, these high-quality parts deliver the proper fit, form, and function, along with the reliability and durability of GM OE. Stay with the parts brand your vehicle came with and get the quality you know and trust with ACDelco GM Genuine Parts.
( 2 )
$20.99
ATP Automatic transmission axle seals are quality OE replacements to help maintain your vehicle and the dollars in your wallet. Doing the job yourself is great and having the right parts make the chore easier. ATP offers drive axle seals that fit your application right the first time for a job well done and on-budget. Let ATP help keep you in motion with replacement automatic transmission drive axle seals.
( 2 )
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
