Availability
Showing In Stock Items. Show All 64 Items.
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$1,022.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$949.95
$763.95
—
$949.95
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$999.95
$853.95
—
$949.95
DeatschWerks X2 Series fuel pump modules are available for a variety of models. These assemblies are compatible with gasoline or ethanol. Order the model recommended for your application.
( 1 )
$849.00
Using all OEM components, Aeromotive VaporWorx Super fuel modules are drop-in units (for specific applications) that excel above 65 psi and perform well at elevated voltage levels. Super fuel modules are compatible with GM FSCM/returnless systems, as well as the VaporWorx standalone PWM returnless controller—no modifications should be needed. Aeromotive VaporWorx Super fuel modules include a new fuel level sensor—40 ohms full/250 ohms empty.
Not Yet Reviewed
$770.25
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$1,062.95
What is your engine wearing? Dressing your Chevy engine with a genuine Chevrolet Performance intercooler water pump means getting the fit and function you know will produce the desired results. These durable fluid pump assemblies are quality-built to outfit your supercharged engine with effective cooling and efficient operation. For upgrade or replacement, maintain your engine's red carpet performance by choosing parts tailor-made to fit—a Chevrolet intercooler water pump.
( 1 )
$785.99
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$899.95
$808.95
—
$810.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$899.95
$763.95
—
$808.95
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 69 )
$799.00
—
$1,049.00
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$780.85
—
$892.25
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$857.57
—
$945.66
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$899.99
—
$924.99
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,032.95
—
$1,144.95
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$762.99
Trick Flow® high-performance flow-matched fuel injectors feature all stainless-steel internals that provide industry-leading atomization and spray patterns, with linear flow at very low pulse widths. Trick Flow’s precision dynamic flow-matched injectors provide more consistent fuel delivery to each cylinder, resulting in reduced emissions, optimized power production, and safer engine operation when pushing the limits of performance. Just don’t take Trick Flow’s® word for it. The results have been verified by multiple USA-based third-party testing labs to ensure consistent results on a variety of test benches. Full characterization data is available to ensure a drop-in, no hassle tuning experience with your stock or standalone ECU. Other notable features include: • 100 percent precision dynamic flow-matched across a range of pulse widths • Unsurpassed balance across a broad range of flow rates • High impedance design • Ultra-compact EV14-style bodies • USCAR connectors • Drop-in, no hassle installation • 8- to 18-volt operating range • 100 psi maximum operating pressure • Full characterization data available for programming stock and/or standalone ECUs • Compatible with gasoline, methanol, and E85 fuels • Sold in matched sets only
Not Yet Reviewed
$849.99
Aeromotive A1000 Camaro Stealth fuel systems assign your modern muscle to a covert operation of high performance! The complete single fuel pump assemblies are capable of supporting big horsepower, and they drop right in to your factory tank. Featuring an A1000 fuel pump, these systems include an integral 100-micron stainless steel pre-pump filter, an ORB-08 return line port, installation hardware, and in-depth instructions. No guesswork or modifying is necessary—and with a simple regulator change, these systems can go from low-horsepower carbureted to supercharged/turbocharged applications. An Aeromotive A1000 Stealth fuel system is the last pump you'll ever need for your Camaro. Go undercover with a bolt-on, high performance solution that saves you time and money—Aeromotive A1000 Camaro Stealth fuel systems.
( 1 )
$895.48
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$946.95
—
$1,081.95
Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 8 )
$937.51
Rhodes Race Cars offers several direct-fit fuel cells. They are made from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. Designed with your safety in mind, most options are internally baffled, will include a factory-style, standard, or sumped pickup, and are available with or without a single or dual internal fuel pump. Select the Rhodes vehicle-specific fuel cell needed for your ride.
Not Yet Reviewed
$889.95
—
$999.95
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,449.95
—
$1,499.95
$797.95
—
$824.95
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$773.06
—
$862.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
