Availability
Showing In Stock Items. Show All 523 Items.
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$589.95
—
$639.95
Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.
( 4 )
$5,472.99
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 667 )
$71.99
—
$119.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 357 )
$53.99
—
$185.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 178 )
$40.99
—
$71.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$161.99
—
$189.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$68.99
—
$93.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$17.99
—
$24.99
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 235 )
$309.95
—
$418.26
Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 6 )
$3,034.99
For a lubrication system that can keep up with your high performance engine, start by bolting on one of our Summit Racing™ oil pans. These steel pans are built by hand in America with power-supporting features like a directional windage screen, a trap door baffle for improved oil control, and a built-in crankshaft scraper. They also have magnetic drain plugs, 1/4 in. NPT dipstick fittings (dipstick not included), and a black powdercoated finish for rust prevention. Small Chevy pans are compatible with a 3 7/8 in. stroke, while big Chevy pans work with up to a 4 1/4 in. stroke.
( 102 )
$276.99
—
$319.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 138 )
$81.99
—
$174.99
PROMAXX Performance designed and developed these cylinder heads from the GM 6.5 diesel casting. They are cast iron direct bolt-on replacements for your 6.5L diesel engine. The assembled heads have straight intake bolt holes in the cylinder head, and will typically use a one-piece intake manifold. Order the model recommended for your Chevy or GMC truck.
( 8 )
$538.00
Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 7 )
$2,988.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 320 )
$43.99
—
$133.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 116 )
$15.99
—
$21.99
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 127 )
$189.99
—
$289.99
These Cloyes Quick Button two-piece timing covers have a removable center plate with an O-ring seal to allow for easy access to your cam when changing your timing. Depending upon your application, some covers feature a built-in roller cam button that allows you to adjust cam endplay with the cover in place. Precision-machined from die-cast aluminum for sure sealing, these covers fit with most water pumps and timing sets.
( 137 )
$189.99
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 418 )
$190.97
—
$461.69
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 253 )
$44.99
—
$126.99
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$119.99
—
$446.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
