CHEVROLET C10 SUBURBAN | Summit Racing

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.03 out of 5 stars ( 38 )

$1,349.95

—

$1,649.95

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.21 out of 5 stars ( 28 )

$1,899.95

—

$2,749.95

Optima RedTop Starting 12-Volt Batteries

Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.

4.81 out of 5 stars ( 1559 )

$269.99

—

$319.99

Summit Racing™ Mini High-Torque Starters

You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.

4.5 out of 5 stars ( 730 )

$159.99

—

$189.99

Painless Performance 27-Circuit Classic-Plus Customizable GM Truck Chassis Harnesses

Painless Performance 27-circuit Classic-Plus customizable GM truck chassis harnesses are designed to fit a wide range of trucks, Blazers, and Suburbans—whether C10, C20, or C30. They feature a factory-style bulkhead connector, allowing for easy mounting of the fuse block in the factory location, and have many factory connectors already installed on the harness out of the box. Each wire is custom-printed with the circuit identification, as well as using the GM color codes for easy installation. Wire your Squarebody once—and wire it right with these Painless 27-circuit Classic-Plus customizable GM truck chassis harnesses! Additional features and benefits include: * Each harness comes open-ended (headlight and taillight wiring) with extra length and can be paired with light socket kits (also available by Painless, but sold separately) * Included connectors for: the headlight switch, dimmer switch, wiper motor, ignition switch, blower motor and switch, blower resistor, and instrument cluster

4.81 out of 5 stars ( 42 )

$754.99

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.74 out of 5 stars ( 27 )

$1,799.95

—

$2,049.95

Summit Racing™ Headers

Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)

4.23 out of 5 stars ( 2118 )

$189.99

—

$399.99

Summit Racing™ Direct-Fit LED Headlight Assemblies and Components

If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.

4.4 out of 5 stars ( 146 )

$99.99

—

$299.99

Borgeson Universal Street and Performance Series Steering Boxes

Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).

4.75 out of 5 stars ( 284 )

$493.76

Powermaster PowerMax Plus Starters

Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!

4.52 out of 5 stars ( 1232 )

$159.99

—

$248.99

Griffin Performance Fit Radiator Combos

Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.

4.02 out of 5 stars ( 249 )

$840.99

—

$997.00

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.85 out of 5 stars ( 62 )

$2,895.95

—

$3,195.99

Optima YellowTop Deep-Cycle 12-Volt Batteries

Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.

4.79 out of 5 stars ( 436 )

$319.99

—

$329.99

Dakota Digital RTX Direct-Fit Gauge Kits

Dakota Digital RTX direct-fit gauge kits retain your classic vehicle's stock look without sacrificing the late-model features you love. Every effort was made to incorporate OEM design elements regarding the layout, face styling, and indicators. Starting from scratch, these CNC-machined cluster housings are filled with electronics that raise the bar--in fact, the high-def message centers can be configured to display just about any piece of information needed. The RTX Series utilizes a central control box to make installation and setup as easy as possible. Choose the model with gauges and features designed to fit your specific vehicle.

4.78 out of 5 stars ( 117 )

$1,676.75

—

$1,800.25

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.42 out of 5 stars ( 12 )

$1,449.95

—

$2,299.95

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.63 out of 5 stars ( 112 )

$2,099.95

—

$2,219.95

Powermaster XS Torque Starters

Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.

4.57 out of 5 stars ( 955 )

$259.99

—

$356.99

American Autowire Classic Update Series Wiring Harness Kits

American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location

4.7 out of 5 stars ( 593 )

$684.38

—

$752.15

Vintage Air Gen-V SureFit Systems Evaporator Kits

Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower

4.22 out of 5 stars ( 23 )

$1,461.99

Summit Racing™ Performance Fit Aluminum Radiators

Summit Racing™ performance fit radiators feature a quality aluminum core and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. Modifications may be required when installing Summit Racing™ performance fit radiators. Designed for use with electric fans, the OEM fan shroud is not compatible with these radiators in most applications.

4.32 out of 5 stars ( 1176 )

$279.99

—

$449.99

Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems

Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning

4.07 out of 5 stars ( 59 )

$1,649.95

—

$1,699.95

Coker Classic Star Series Whitewall Tires

Coker Classic Star Series Whitewall tires are modern radials with best-in-class speed, load and traction ratings. They feature stylish whitewalls, which are built into the tires from Day One—delivering the perfect look for your classic car. The whitewalls fit many American and European classic cars from the 1960 and earlier. Star Series tire ratings help them to provide excellent treadwear, traction, and temperature control. Another best-in-class rating is the T speed rating (118 mph), as well as XL load rating, thanks to a reinforced sidewall. The low-noise tread looks and performs nicely; and these tires are DOT approved and E-marked for the European market. You won't find a better whitewall radial tire on the market! * Best-in-class traction: Star Series tires feature Grade-A traction and temperature ratings, meaning you can expect excellent handling and traction on wet and dry roads. They're engineered to outperform all other whitewall tires, and feature a 480 AA UTQG rating for long-lasting tread life and unbeatable traction. This makes your classic car safer to drive in all weather conditions and improves your driving experience. * Star Series tires are engineered with a reinforced sidewall to better support the weight of classic cars. This reinforcement gives the tire Extra Load (XL) rating, meaning added safety and a long-lasting sidewall that won't break down over time. * Star Series tires feature a genuine wide whitewall sidewall style. This means that the bright white rubber is added directly to the tire sidewall during initial construction of the carcass, resulting in a truly integrated, high-quality product after vulcanization. Wide whitewall tires were a very popular choice from the 1930s through the end of the 1950s, and were eventually phased out of mainstream production by 1962. Originally, wide whitewall tires featured a bias ply construction, but now Coker Tire offers them in original style bias ply and modern radial construction. * T Speed rated: Up to 118 mph (190 km/h). Often required OE for higher performance trim level classic automobiles. * Available in a wide range of sizes

4.78 out of 5 stars ( 72 )

$227.00

—

$282.00

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.8 out of 5 stars ( 176 )

$9.99

—

$85.99

Edelbrock Performer RPM Street Fuel Pumps

Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.

4.31 out of 5 stars ( 472 )

$177.95

—

$190.99

CHEVROLET C10 SUBURBAN Parts and Accessories