Availability
Showing In Stock Items. Show All 218 Items.
You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.
( 697 )
$177.99
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1525 )
$249.99
—
$299.99
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 416 )
$319.99
—
$329.99
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1148 )
$141.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 906 )
$244.99
—
$342.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$499.95
$448.95
Painless Performance 27-Circuit Classic-Plus Chevy chassis harnesses are designed to fit the 1955, 1956, and 1957 "Tri-Five" models (150, 210, Nomad, and Bel Air)—and they include additional circuits for power options and accessories. The harnesses feature a factory location Painless mounting plate for the fuse block, front and rear lighting sockets, factory and aftermarket instrument cluster harnesses, and dash and turn signal connectors. They utilize GM color-coded high-grade TXL wire with the circuit identification printed on it for easy installation.
( 10 )
$605.99
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
$403.95
Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.
( 547 )
$160.99
—
$245.99
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
$113.35
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 26 )
$346.99
—
$359.99
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 434 )
$79.09
$66.35
—
$71.75
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$100.79
—
$165.15
BluePrint engine starters feature billet aluminum mounting blocks and their "clockable" models can be rotated or turned for special clearance needs. BluePrint uses high-quality internals for long-life and durability. BluePrint engine starters are trusted by engine builders worldwide!
( 32 )
$139.95
—
$168.95
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 119 )
$126.99
—
$212.99
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$649.95
$448.95
—
$649.95
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 560 )
$755.47
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 165 )
$189.99
—
$231.99
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 16 )
$679.06
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$130.64
—
$171.36
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 12 )
$167.99
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
—
$201.46
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$499.95
—
$528.95
$448.95
—
$475.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$137.95
—
$210.95
$124.15
—
$189.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
