Availability
Showing In Stock Items. Show All 995 Items.
Red Line created the industry of pushing bubbles out of the way to ensure cooling with their Water Wetter cooling system treatment. It's a unique agent for cooling systems that doubles the wetting ability of water. It offers rust and corrosion protection that allows for use of straight water in racing or reduced antifreeze levels in warm climates. It also improves heat transfer and reduces cylinder head temperature. Help your engine keep its cool with Red Line Water Wetter cooling system treatment. Instructions and specs: * Use 1 bottle for most passenger cars and light trucks—treats 3 to 5 gallons or 13.2 to 15.9 liters * Use 2 bottles with larger cooling systems * Use 1 oz. (3 to 4 capfuls) per quart for small cooling systems * Compatible with new or used antifreeze (including those with DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems * Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes * Contains no ethylene glycol
( 169 )
$13.89
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$12.99
—
$21.99
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 370 )
$20.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$24.99
These premium-grade ARP Pro Series flexplate bolts are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining, they feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved register.
( 330 )
$16.99
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 119 )
$19.99
—
$24.99
Summit Bucks
ACDelco GM Genuine Parts engine valve lifter guides keep the lifters from rotating. These GM-recommended replacements deliver peace of mind that the fit, form, and function are of the highest standards. Order the guides designed for your GM year/make and engine application.
( 5 )
$13.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$13.99
—
$16.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 512 )
$15.40
—
$17.99
Sooner or later, you're going to need valve cover gaskets. Our Summit Racing™ valve cover gaskets are ideal. They're constructed from quality materials and so reasonably priced, why not stock up? Order the pair of Summit Racing™ valve cover gaskets designed to fit your application.
( 360 )
$13.99
—
$21.99
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$14.99
—
$18.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$23.99
Summit Racing™ oil pump primers make it easy to get oil to the top of your engine. They're designed to fit in your distributor hole and require no modifications to use. The Chevy primers feature a billet aluminum adjustable collar and black oxide coated steel shaft; while the Ford and Mopar primers use a standard steel shaft with no collar. Order the model recommended for your year/make and engine application.
( 178 )
$21.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 547 )
$15.99
Edelbrock high performance thermostats are designed to ensure consistent cooling in high performance applications. Edelbrock thermostats feature brass and copper valve assemblies with stainless steel bodies for durability. They are bolt-on OE-style replacements and are available to fit many popular domestic and import applications. They are available with160, 180, and 190 degree F ratings.
( 46 )
$22.95
—
$24.95
Red Line's D4 ATF is their most versatile automatic transmission fluid, designed for use where Dexron III, Dexron II, Mercon, and Mercon V fluids are recommended to provide a GL-4 level of gear protection. D4 synthetic ATF allows for high-temp operation without varnishing valves and clutches, and facilitates excellent cold-weather operation. It can also be used with manual transmissions and transaxles, like T-5, T-45, T-56, and late model BMWs. Keep your investment protected with Red Line D4 ATF!
( 60 )
$16.97
Summit Bucks
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 71 )
$14.99
—
$18.99
McGard lug nuts are designed to last for life. These wheel fasteners are made of restricted chemistry steel for structural integrity, then triple nickel chrome plated in silver or black for lasting beauty. All McGard lug nuts are through-hardened and tempered, reaching the depth of hardness needed for their unsurpassed level of safety (unlike case-hardening, which is only a surface treatment). They're available in a variety of thread sizes, shank lengths and diameters, and seat and conical styles. McGard lug nuts also offer a lifetime guarantee against rust!
( 591 )
$14.99
—
$21.99
The importance of pressure plate bolts in a racing or high performance street applications cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application-specific to ensure the optimum grip length. ARP High Performance Series bolts are made from a premium-grade chromoly and hardened to a nominal tensile strength of 180,000 psi. Choose the thread size needed for your make and model.
( 240 )
$15.99
—
$24.99
These ARP bellhousing bolt kits are designed to securely hold your transmission bellhousing in place on the engine block. They are manufactured from ARP's durable 8740 heat-treated alloy and have a protective black oxide finish. The bolt kits come in your choice of standard hex head or smaller 12-point heads for additional clearance or to fit into tighter firewall applications.
( 250 )
$16.99
Our Summit Racing™ brass freeze plugs were designed for marine use, but you landlocked guys will get a lot of use out of them, too. All of the necessary plugs are included.
( 102 )
$17.99
Made from high quality material Summit Racing™ thermostat housing gaskets provide a leak free seal to this critical engine component. Keep your cooling system operating properly with Summit Racing™ gaskets.
( 89 )
$15.99
Chevrolet Performance offers the parts that you need to keep your cooling system running right.
( 161 )
$21.85
Summit Bucks
ACDelco power steering fluid is important for protecting and ensuring the longevity of your power steering system. These hydraulic fluids transfer power in the steering system and are specially formulated to protect the components. With different varieties to suit most applications and environments, they'll keep your power steering system running quietly and efficiently for years to come. Reduce leaks, squeaks, and squeals by ordering the ACDelco power steering fluid formulated for your application.
( 17 )
$11.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
