Availability
Showing In Stock Items. Show All 212 Items.
If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.
( 389 )
$632.99
—
$875.99
We won't go into a song and dance about Schoenfeld headers. They've been on championship-winning cars for a lot of years. Since we carry the whole Schoenfeld line, we can get you any header they make. If you don't see yours listed, please call. Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 131 )
$359.99
—
$754.99
Summit Racing™ Pro LS turbo manifolds allow you to easily bolt a turbocharger to your LS engine. Built from heavy-duty cast stainless steel with features, such as extra-thick flanges, V-band crossover adapters, and built-in wastegate mounts, our Pro LS turbo manifolds can handle all the heat and horsepower you can throw at them. Features: • Universal turbo manifolds • Single or dual mount designs • T4 flanges • Built in 44 or 45mm wastegate flanges • 304 cast stainless steel • Fits all LS exhaust ports
( 9 )
$599.99
—
$999.99
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$877.00
—
$1,153.00
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$319.95
—
$969.95
$287.95
—
$871.95
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 290 )
$496.19
—
$866.15
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 367 )
$169.95
—
$184.95
$152.95
—
$166.45
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,399.95
$1,003.95
—
$1,258.95
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$907.65
—
$1,747.95
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$605.80
—
$1,747.95
On Sale
Hooker LS turbo exhaust manifolds allow a simpler way to add a turbo to your muscle car. Made from high-silicon-moly ductile iron, these manifolds are much more durable and retain more heat than fabricated headers. The manifold kits include stainless steel V-band clamps and flanges, heater hose heat shield, and header bolts. A turbo crossover tube is used to connect the two manifolds (sold separately). Hooker LS turbo exhaust manifolds are offered for driver and passenger side individually or as a set—and they work with most common LS swap parts (i.e. motor mounts, swap oil pan, and accessory drive systems) to provide the basic building blocks needed to complete a custom turbo system for your GM LS engine.
( 11 )
$689.95
$619.95
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$1,498.15
—
$3,020.05
They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.
( 415 )
$468.99
—
$513.99
Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!
( 638 )
$359.99
—
$520.99
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$449.95
$298.75
—
$513.95
Doug's Headers side tubes complete your side exhaust with racy looks. Corvettes are known for being fast, and side pipes and tubes create a fast look that is natural and clean! Doug's 4 in. side tubes bolt to existing holes in your Corvette rocker panel and clamp to either their big block or small block side exhaust headers for a leak-free seal. And, they're available in your choice of metallic ceramic, black, or chrome finishes. Side pipes belong on Corvettes; finish the perfect look with Doug's Headers side tubes.
( 39 )
$339.26
—
$665.20
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2462 )
$286.99
—
$919.99
ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.
( 63 )
$75.99
—
$85.99
Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors
( 5 )
$1,379.00
—
$2,849.00
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 303 )
$456.21
—
$760.36
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$372.99
—
$702.99
Headers can represent a sizable investment, so you'll want to keep them securely attached. In addition, exhaust leaks can cost you power and even cause damage to your vehicle. ARP stainless steel header studs are the answer. They're made from premium 300 stainless steel, which is rated at 170,000 psi tensile strength--much stronger than Grade 8 steel. These studs are also highly corrosion and heat-resistant, for long service under the toughest conditions, and they're polished to a mirror-like shine. Each kit includes the specific number of parts for the desired application, plus premium-quality washers and either hex or 12-point nuts.
( 65 )
$90.99
—
$151.99
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)
( 1 )
$1,399.95
—
$1,692.95
$1,258.95
—
$1,522.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
