Availability
Showing In Stock Items. Show All 1853 Items.
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$699.99
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$207.99
$204.99
—
$234.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$3,949.95
$1,798.95
—
$4,449.95
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$244.98
$213.28
—
$265.18
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 192 )
$119.99
—
$191.99
Mate your camshaft to a set of BTR Delphi LS7 hydraulic roller lifters. These full sets of lifters, also known as LS7 lifters, will also work in SBC and LT1 applications that originally came with hydraulic roller lifters. Choose your set today!
( 22 )
$16.99
—
$209.99
Summit Racing™ hydraulic roller lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters are made to fit your OEM hydraulic roller camshaft engine with no modifications.
( 4 )
$199.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 103 )
$122.99
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! BluePrint Engines Pro Series Chevy LS crate engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * Valve covers * Timing cover
( 1 )
$9,999.00
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 798 )
$73.99
—
$1,044.99
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 389 )
$77.99
—
$242.99
Chevrolet Performance hydraulic roller lifters are designed as direct replacements for your engine. These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher rpm capability- what more can you ask for?
( 65 )
$475.56
—
$553.04
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 17 )
$319.99
—
$999.99
The Pro Series cylinder head bolts from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining, and are rated at a whopping 190,000 psi. The Pro Series are also available with hex and 12-point heads. All kits come complete with hardened parallel washers for even load distribution and accurate torque readings.
( 167 )
$118.99
—
$163.99
Summit Racing™ Pro LS Truck Swap cams are affordable and give you maximum punch where the torque converter hits. The cam lobes are designed for excellent valvetrain longevity. Both drop-in or high-lift versions are available. They come in stages allowing you to quickly determine which gives you the idle and efficiency you are looking for. Idle response and the midrange torque from theses camshafts is unmatched. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for an extremely good finish quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available, quality spring packs.
( 91 )
$299.99
—
$319.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 30 )
$4.99
—
$206.99
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$664.65
—
$921.38
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$9.99
—
$24.99
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter guides will keep your lifters properly positioned to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$9.99
—
$54.99
Trick Flow® Double platinum .660 LS dual valve spring and retainer kits are designed to provide maximum performance and reliability for your LS-based build. All components are made from a proprietary blend of alloys and tested under rigorous conditions to ensure that they perform and last at the highest levels. These racing valve springs are made with cutting-edge material and processing advancements. The retainers are available in titanium or chromoly steel and are precision machined to reduce unnecessary weight. The kits are designed for drop-in installation into any standard LS-style heads with no machining and include all necessary components and work with most hydraulic roller valvetrains. Whether you use them in your street or race machine, Trick Flow® Double platinum .660 LS dual valve spring are built to perform and will help get the most out of your LSX.
( 13 )
$258.99
—
$353.99
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 70 )
$179.99
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 22 )
$1,166.95
—
$1,545.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$849.95
$147.95
—
$749.95
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 15 )
$41.99
—
$149.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
