Availability
VaraRam VR-B2 Corvette cold air intake kits feature a multiple venturi system to accelerate air flow. The intake ram air ducts are designed to produce over 40HP and increase torque throughout the RPM range. These air intake kits increase both throttle response and gas mileage. VaraRam VR-B2 cold air intakes are easy to install and do not require any cutting or drilling. Includes VR Super Street filter.
( 19 )
$328.99
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 92 )
$649.95
—
$689.95
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 90 )
$224.99
—
$279.99
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 757 )
$499.99
$299.99
—
$474.99
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 69 )
$372.00
$334.80
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$329.90
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
( 45 )
$82.99
—
$103.99
On Sale
Build power by reducing air restriction and turbulence with SLP Performance LS1 air box lids. These composite lids feature a wedge-shaped design to increase and smooth out airflow as it enters your engine. They come with a steel clamp for easy hookup, and they mount in place of your stock lid.
( 66 )
$139.99
$125.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$249.99
$157.99
—
$269.99
VaraRam C5 VR power duct systems out-flow the best and can be used with many air intake systems. These throttle body relocation kits for C5 Corvettes have a reverse venture design with an integrated rear air horn. They streamline the existing airflow, while increasing the overall volume—delivered at the highest possible velocity at each rpm through the mass airflow sensors and throttle body. VR-C5 power ducts are constructed from superior resin-reinforced material and include front and back positive clamp rings for strength and longevity. They're engineered for stock to high-horsepower machines. Once you install one, you'll know they're not just another power duct.
( 9 )
$113.99
On Sale
Airaid revs up your engine with its SynthaMax MXP Series cold air intake kits! These induction units offer a high performance, maximum-flow design teamed with high-tech filtration technology at its best. Their one-piece, roto-molded air box cancels out restrictive factory designs, while their massive cross-linked, high-density polyethylene air intake tube maintains proper air/fuel ratios; no recalibration is needed after the install. Add to this the super-synthetic, oil-free maintenance of SynthaMax washable, reusable filters—and you have clean, cold air for your gas or diesel beast to breathe for improved horsepower and torque.
( 12 )
$419.99
$369.99
Chevrolet Performance offers these air inlet elbows for small block LT1 applications. These elbows are constructed from durable rubber and have blocked intake air silencer passage.
( 50 )
$108.13
On Sale
SLP Performance Blackwing cold air induction packages will help to maximize your ride's potential. Factory air boxes can restrict airflow, choking your engine and its efficiency. These induction systems will fix that problem by eliminating the factory location and moving the intake closer to the cooler, denser outside air. The reusable high-flow, conical air filter aids in gathering and transferring more air—and is quick and easy to clean. SLP Performance offers these Blackwing cold air induction packages for numerous make/models, delivering extra power and fuel economy. Order the assembly designed for your vehicle application.
( 12 )
$269.99
$242.99
Do you want an easy way to improve your engine torque and increase horsepower? These open element air intakes by Volant Performance can help! Feature's include a MaxFlow 5 oiled cotton gauze air filter, an open element filter box, and a larger intake duct to give the engine a less restrictive air passage to breathe through. These intakes are designed with larger diameters, unique bends, and smooth transitions to offer maximum horsepower and awesome throttle response. Additional features include: * Volant cross-link sculptured polyethylene air ducts * Volant cross-link polyethylene heat shield is designed to deflect a large percentage of engine heat * Volant MaxFlow 5 oiled air filter is a cleanable, reusable, high-grade cotton gauze filter media that reduces air restriction and increases engine output * High performance silicone connectors provide flexibility while maintaining strength and thermal stability * Marine-grade stainless steel clamps allow for optimal performance
( 27 )
$329.90
—
$351.90
Halltech C5 Killer Bee II air intake conversion packages offer high performance that will provide airflow to 800 hp. These packages include the C5 Killer Bee II cold air induction system designed originally for the C6Z06. Provide your Corvette with world class performance from a Halltech C5 Killer Bee II conversion package, because as they say, "It's not a proper Corvette until it's a Halltech Corvette!" Features: * Halltech high-flow Killer Bee II induction intake * Halltech Super Bee 15 in. 950 cfm filter with velocity stack * Provision for your A.I.R. pump if required (default is delete) * Halltech MAF adapter * GM new MAF sensor (probe-style from the LS7/LS3) * Halltech tested MAF tables for the ECM
( 1 )
$668.99
VR power ducts--should you use them? Yes, you should. VaraRam VR-C5 power duct systems out-flowed the best and can be used with many air intake systems. These throttle body relocation systems for C5 'vettes from VaraRam have a reverse venture design with an integrated rear air horn. They streamline the existing airflow, while increasing the overall volume delivered at the highest possible velocity at each rpm through the mass airflow sensors and throttle body. VaraRam VR-C5 power ducts are constructed from superior resin-reinforced material and include front and back positive clamp rings for strength and longevity. They're engineered for stock to high-horsepower machines. Once you install one, you'll know they're not just another power duct.
( 1 )
$108.99
Don't let your stock air box hold your vehicle's performance back. The experts at Trick Flow® have engineered TFX™ cold air intake kits to meet the intake airflow demands of your fuel injected ride. The kits replace your restrictive air cleaner with a low-restriction reusable filter, a tuned molded black plenum (where applicable), mounting hardware, and instructions. They are manufactured by K&N for Trick Flow®.
( 137 )
$299.99
—
$490.99
On Sale
These FloPac cold air induction systems from SLP Performance increase power by replacing your restrictive stock intake lid. They include a new high-flow lid, a reusable air filter and cold air induction scoop, and hardware.
( 14 )
$369.99
—
$389.99
$332.99
—
$350.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 832 )
$199.99
$174.99
On Sale
Airaid SynthaFlow CAD cold air intake kits supply your engine with maximum cold airflow for maximized performance! Their cold air dam design isolates engine heat away from your intake to keep the cold air flowing. Airaid CAD intakes house SynthaFlow oiled, washable filters that are handmade from multi-layered cotton gauze and the finest synthetic materials to trap the smallest particles of dirt. Airaid SynthaFlow cold air intake kits install easily in the stock air filter location and will flow colder air through the filter and to your engine for a boost of power.
( 4 )
$369.99
On Sale
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$384.00
$345.60
ICT Billet LS mass airflow sensor plugs are built from the highest quality 6061 T-6 billet aluminum. The plugs are designed for use with engine RPO codes LS3, LS7, LS9, LSA, LV1, LV3, LT1, LT4, L83 and L86. They include the necessary bolts and O-rings for proper installation and seal.
( 1 )
$24.99
Halltech Super Bee air filter elements provide the perfect fit and function, just like the originals they are replacing. Layers of pleated cotton filter media act as a physical barrier to contaminants, with the pleats specifically engineered to provide a large capturing area. The tacky oil helps trap and hold dirt and contaminants, keeping them in the filter and out of your engine. The pleated mesh protects both sides of the cotton filter media and provides a sturdy structure for long-lasting durability. These extreme high-flow, cotton-oiled media filters are made exclusively for Halltech by K&N to fit specific Killer Bee intake systems, the Killer Bee II, C5 Venom II, and C6 Venom II. Halltech Super Bee filters are washable and reusable and should always be cleaned and oiled with K&N proprietary oil and cleanser specifically made for the cotton media. They come pre-oiled.
Not Yet Reviewed
$198.00
—
$223.00
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 603 )
$449.99
$317.99
—
$422.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
