CHEVROLET 5.3L/325 | Summit Racing

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.18 out of 5 stars ( 92 )

$1,849.95

—

$1,899.95

Summit Racing™ Pro LS Piston and Rod Kits

Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control

4.84 out of 5 stars ( 19 )

$1,504.97

—

$1,654.97

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems

FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features

3.21 out of 5 stars ( 42 )

$2,107.00

$1,625.40

—

$1,997.99

Summit Racing™ Pro LS Crank and Rod Kits

Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.

4.0 out of 5 stars ( 1 )

$1,599.98

Dakota Digital HDX Direct-Fit Analog Gauge Systems

Dakota Digital HDX direct-fit analog gauge systems feature the latest in aftermarket automotive instrumentation technology. They take personalization and usability to a whole new dimension, while retaining your favorite features from the wildly popular VHX-Series, such as LED backlighting for the numbers, tick marks, and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged, and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well. These features add up to clean, easy-to-read instrument systems in all conditions. Precision stepper motors provide accurate needle movement, along with a full sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. Dakota Digital HDX direct-fit analog gauge systems are available with your choice of black or silver alloy gauge-face styling. The systems allow the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme.

4.88 out of 5 stars ( 58 )

$1,543.75

Ridetech Ridepro 5 Gallon Analog Compressor Systems

Ridetech Ridepro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, Ridepro air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. Ridepro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.

Not Yet Reviewed

$1,855.00

UMI Performance Tubular K-Members

UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting

4.67 out of 5 stars ( 18 )

$1,566.96

Wilwood AERO6-DM Direct Mount Truck Brake Kits

Wilwood AERO6-DM direct mount truck brake kits were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For trucks and SUV's, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. The kits provide better hold while crawling and more thermal capacity for high-demand off-road and highway use, including towing, hauling, and commercial applications. These kits are engineered for direct mounting on Chevy, Ford, Jeep, and Toyota trucks, SUVs, and 4x4s. Forged aluminum AERO6-DM six-piston calipers deliver increased clamping force and are compatible with OEM rear brakes, master cylinder, and computer systems. The premium grade, long-grain carbon iron alloy rotors substantially increase braking performance with fade-resistant Wilwood performance brake pads. These kits fit in most 17 in. and larger wheels. Order the model designed to fit your application.

5.0 out of 5 stars ( 6 )

$1,755.59

Borla S-Type Cat-Back Exhaust Systems

Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.

4.79 out of 5 stars ( 942 )

$1,539.99

—

$1,847.99

Ultimate Headers 321 Stainless Steel Headers

Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors

4.6 out of 5 stars ( 5 )

$1,659.00

DeWitts LS Modified Pro-Series Radiator Modules

DeWitts LS Modified Pro-Series radiator modules are the complete radiator and fan assembly. They are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle. Each module includes a fan assembly for a quick complete installation.

4.56 out of 5 stars ( 18 )

$1,531.99

—

$1,987.99

Tilton ST-246 Twin Disc Clutch Kits

Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque

4.11 out of 5 stars ( 9 )

$1,576.75

Borla ATAK Cat-Back Systems

Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.

4.84 out of 5 stars ( 552 )

$1,514.99

—

$1,694.99

Modern Classic Series Classic Intake Manifold Kits

Modern Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. Modern Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.

1.0 out of 5 stars ( 1 )

$1,521.95

Edelbrock E-Street Cylinder Heads

Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.

4.29 out of 5 stars ( 120 )

$1,549.95

—

$1,667.50

On Sale

Belltech Coilover Kits

Belltech coilover kits are designed to replace the factory shocks and coil springs. They include performance shocks with stainless steel construction, coilover springs, a dust boot, and a threaded shock body. Belltech coilover kits offer up to 3 in. of lowering adjustment and increase performance handling.

5.0 out of 5 stars ( 3 )

$1,760.00

—

$2,195.00

$1,584.00

—

$1,975.50

Hays Twister Full Race Torque Converters

Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.

5.0 out of 5 stars ( 1 )

$1,599.95

—

$1,999.95

Borla Touring Exhaust Systems

Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.

4.71 out of 5 stars ( 279 )

$1,517.99

—

$1,949.99

Skyjacker Pallet Kit 4WD Suspension Lift Kits

These Skyjacker pallet kit 4WD suspension lift kits provide every component necessary to raise your suspension. All of the pieces are boxed at the manufacturer to ensure that you receive everything required to complete the installation for your specific vehicle's application. From shocks to mounting bolts and nuts, these Skyjacker pallet kit 4WD suspension lift kits will have your vehicle lifted in no time.

Not Yet Reviewed

$1,984.48

COMP Cams Shaft Mount Aluminum Rocker Arms

COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.

5.0 out of 5 stars ( 1 )

$1,705.95

SSBC-USA Sport R1 Disc Brake Kits

Increase your stopping power with SSBC-USA Sport R1 disc brake kits. They feature aluminum Sport R1 single piston brake calipers with built-in parking brakes. The calipers are given a clear anodized finish for added durability, but you can choose from optional red, black, or polished finishes. Also included in the Sport R1 kits are rotors, high performance brake pads, braided stainless flex lines, mounting brackets, and hardware. When you want American stopping power, convert to performance with style: SSBC-USA Sport R1 disc brake kits, available in dozens of models and options for applications from 1953 and up.

Not Yet Reviewed

$1,611.00

—

$1,969.00

AWE Tuning 0FG Exhaust Systems

AWE Tuning 0FG exhaust systems combine 2FG (H-pipe) and 1FG (resonated front sections) configurations with dual 3 in. T304L stainless steel tail pipes and 5 in. double-walled AWE exhaust tips in chrome or a signature diamond black finish. The result is a unique soundtrack tailored perfectly for your truck that comes to life under boost while remaining civil in and out of the cabin at cruising speeds. Handcrafted and CNC mandrel-bent, AWE 0FG exhausts provide a weight savings of 41 lbs. total, and each tip is individually adjustable, allowing bumper depth to be set according to personal taste.

4.78 out of 5 stars ( 9 )

$1,855.00

Be Cool Polished Radiator Modules

Be Cool polished radiator modules offer impressive looks and cooling performance. They're offered in a variety of sizes and styles—including crossflow and downflow—for fitment on countless vehicle applications. Perhaps you're working with an LS swap and want an exact fit radiator and single or dual fan combination. You'll find these options and more available from Be Cool.

Not Yet Reviewed

$1,699.99

Dart GEN III Fully Counterweighted Crankshafts

Dart GEN III fully counterweighted crankshafts are built for enhanced bearing load distribution, allowing them to withstand high-boost and high-rpm applications. With eight counterweights (instead of 6), crank is substantially stiffened—which reduces flexing, and thereby puts less stress on the mains. Crank comes in a 4.000 in. stroke with an LS1 or LS7 snout, and has lightening holes in the rod journals to reduce crankshaft inertia weight for faster rotation and improved engine acceleration. Your crankshaft is the backbone of your engine—so choose one that has the quality, features, and price you want: the Dart Gen III fully counterweighted crankshaft. Additional product features: * Extra-strong, 4340 billet one-piece construction * Long and short snouts available * Heavy-duty rod cheeks * Small hole through the rod pin * Rough balanced @ 1780 grams

Not Yet Reviewed

$1,999.99

CHEVROLET 5.3L/325 Parts and Accessories