Availability
Showing In Stock Items. Show All 331 Items.
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$272.10
$244.89
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,095.00
—
$4,559.95
On Sale
Sting the competition with the full-body design of Scorpion Race Series roller rocker arms. They're precision-crafted via high-tech manufacturing methods, then fully CNC-machined. These rockers offer more clearance for retainers and springs, and can easily handle .950 in. lift and 950 lbs. of open spring pressure. The surfaces are micro-polished and anodized for looks, protection, and maximum durability. Scorpion rocker arms are available in nearly 200 fitment options; order the set recommended for your application. More speed for your high performance passion! Additional features include: * Aerospace-grade 7000 Series aluminum for maximum strength and durability * Needle bearing fulcrum and roller tip * Precision-ground needle bearings * Centerless ground trunnion, ground pin, and roller * Burr-free trunnion through hole * Directed oiling * Large machined seat and thick-walled adjusting nut (polylock) * Pedestals machined from solid steel * Black oxide coated steel parts * 1.600 in. fulcrum width * Clear 1.625 in. O.D. valve springs
( 212 )
$26.41
—
$413.03
$22.98
—
$359.34
Our Summit Racing™ gear drives are great for you folks who want better timing and a choice of "noisy" or "quiet" operation. Their dual-idler design has CNC-machined components and they are easy to install. Each set comes with a pressed-in Torrington bearing or an SAE 660 bronze thrust washer (varies by application), as well as a cam gear that allows for timing adjustments in two-degree increments. These drives fit under your stock timing cover and come complete with instructions. Minor machining is required on models with the bronze thrust washer.
( 98 )
$157.99
—
$171.99
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 27 )
$12.99
—
$143.99
On Sale
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$306.99
—
$766.99
$276.29
—
$690.29
ARP engine bolt kits come in your choice of polished stainless steel or black oxide chromoly steel bolts with 12-point or hex heads. These kits include the bolts and washers for your engine.
( 223 )
$99.99
—
$138.99
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$155.95
$140.35
Isky's patented anti-pump-up hydraulic Superlifters outwardly appear similar to standard hydraulic lifters, but there's a world of difference. The design of the lifters allows the use of a more radical cam, without loss of compression and horsepower from valves being held off their seats. Because they don't bleed down completely, they are also far more durable and reliable than any other lifters on the market. Power Hydraulics are premium-quality stock replacement hydraulic valve lifters.
( 12 )
$233.99
P-Ayr replica long blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
( 88 )
$499.99
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 28 )
$21.99
—
$232.99
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$475.85
—
$1,051.95
$428.26
—
$946.76
Dress up your engine with a set of diecast aluminum valve covers from Billet Specialties. They're made from quality diecast aluminum that is polished or black powdercoated to the highest standards, and each design is CNC-machined in-house. The covers feature thick, precision-cut flanges to prevent unwanted oil leaks and warping. They are available in tall or short styles and come in your choice of a plain finish or a variety of engravings. Their 1.250 in. holes fit most breathers and PCV valves for an easy installation.
( 304 )
$138.86
—
$317.95
Tests prove that many standard engine-driven water pumps produce severe drag at high-rpm, absorbing as much as 15 to 20 hp. Here's the solution for that issue. Moroso electric water pump drive kits come complete with a 12 V electric motor, all drive pulleys, belts, fasteners, and a toggle switch. They fit a wide range of makes and models as far back as the mid-1950s, and the drive kits are ideal for drag racing applications.
( 28 )
$183.99
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$20.99
—
$215.99
Crower cutaway severe-duty roller lifters are a must for high-pressure, high engine rpm applications. These mechanical roller lifters feature a special alloy body, a lightweight design, and a heavy-duty blade that has been moved up to fit late model blocks. They are available in standard or offset sizes. Order the model designed for your specific application.
( 16 )
$758.99
—
$968.99
On Sale
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 90 )
$1,224.00
—
$1,389.00
$1,101.60
—
$1,250.10
Howards Cams Pro Lite direct lube mechanical roller lifters are up to 20 grams a pair lighter (only 198g SBC) than competitors' lightweight lifters. Plus, direct lube high-pressure pin oilers are included at no extra charge. Their lightened bodies are still ultra-strong because they are made from 8620 steel. The lifters are fitted with 9310 steel rollers on precision-sorted needle bearings for reliability and they feature stainless steel cross bars.
( 4 )
$114.99
—
$646.99
Why put a steel timing cover on your mill that's prone to bending and leaking, when you can put one of these Summit Racing™ 2-piece billet aluminum timing covers in place? With thick billet gasket flanges, you'll be sure to get a premium sealing surface that retains its integrity. The covers are made of precision billet aluminum with a hand-polished finish. The 2-piece design makes it possible for you to access the cam and timing set without breaking the oil pan seal. They include a seal, cam button, gaskets, mounting hardware, and shims.
( 12 )
$245.99
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 351 )
$82.99
—
$211.99
Summit Bucks
Fel-Pro Performance oil pan gaskets offer three types of construction. Some are made from Felcoid/Plus, a special fiber core with a latex rubber coating. For applications where a tougher seal is needed, they have solid steel core gaskets wrapped with rubber-coated fiber facing material. And for newer engines, there are one-piece molded silicone-rubber gaskets specifically designed to handle their special needs. Some of these gaskets have a solid steel core, while others have a rigid carrier-type design. Fel-Pro oil pan gaskets come with an anti-stick treatment for easy removal. Order the replacements recommended for your year/make and engine family.
( 419 )
$20.99
—
$39.99
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 227 )
$1,199.95
$619.95
—
$1,078.95
Here's a simple high performance solution! Our Summit Racing™ camshafts feature straight-grind, and are designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road.
( 162 )
$164.99
TCI Premium Series flexplates are designed to be upgraded replacements for factory units. Precision manufactured and featuring a premium e-coat finish that resists corrosion from salt and road grime, they are durable and longer lasting options than commonly available budget flexplates. TCI Premium Series flexplates are spin balanced to ensure vibration-free operation and to meet factory balance specifications for both internally and externally balanced engines. They are the perfect replacement for any stock to mild performance vehicle.
( 9 )
$59.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
