Availability
Looking for big LS engine power at an affordable price? Summit Racing™ remanufactured 5.3L LS long block crate engines are rated at 450 HP and 420 lbs.-ft. torque! This engine will give you the performance and drivability you have been searching for at a price you can afford. It can be a performance upgrade for 99-07 Chevy trucks, or an engine swap into your project vehicle. You will save time and money by leaving the machine-work and assembly to us. Just bolt on your accessories and drop it in. These engines are machined and assembled for us by the guys at ATK, and backed with a 2-year unlimited mile warranty for peace of mind. Technical specifications: * Horsepower: 450+ * Torque: 420+ * Block: Seasoned OE LM7/5.3L iron * Bore/stroke: 3.800-3.820 in. x 3.622 in. * Year range: 1999-2007 * Displacement: 323 C.I.D. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting Rods: OE GM forged powder metal 6.093 in. * Pistons: Hypereutectic flat top * Piston rings: Moly * Compression ratio: 10:1 compression * Camshaft: Summit Racing Pro LS Roller * Camshaft specifications: Lift- 550/550, Duration @.050- 222/232 * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: #799 or #243 OE aluminum 64cc 2.00 in./1.55 in. valves * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed
( 39 )
$3,849.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 98 )
$2,149.95
—
$4,449.95
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 18 )
$229.99
—
$234.99
Chevrolet Performance 6.2L 376 C.I.D. 495 hp engine assemblies feature an impressive 495 hp at 5,570 rpm with 475 lb.-ft. of torque. The assemblies use a production bottom end and the race-tested LS "Hot" cam. With significantly more duration than the stock camshaft, the valves remain open longer allowing these engines to pull in increased amounts of clean air through the large rectangular ports. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engine includes: * Fully assembled long block * Oil pump, pick-up and oil pan * Harmonic balancer * Front timing cover * Oil filter
( 3 )
$7,515.69
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 49 )
$399.99
—
$799.91
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 385 )
$194.99
—
$237.99
Mate your camshaft to a set of BTR Delphi LS7 hydraulic roller lifters. These full sets of lifters, also known as LS7 lifters, will also work in SBC and LT1 applications that originally came with hydraulic roller lifters. Choose your set today!
( 16 )
$209.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$88.99
—
$699.99
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$212.38
—
$265.98
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
$1,163.95
—
$2,499.95
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,808.31
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 186 )
$120.99
—
$198.99
Summit Racing™ hydraulic roller lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters are made to fit your OEM hydraulic roller camshaft engine with no modifications.
( 2 )
$199.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 882 )
$249.99
—
$324.99
If you're putting together a budget power build, the Brian Tooley Racing LS9 head gaskets can't be beat for performance and value. These Brian Tooley cylinder head gaskets feature a 4.100 in. bore and a .055 in. thickness, spread across 7 layers of steel.
( 7 )
$129.99
Summit Racing™ LS conversion headers are made of 304 stainless steel and offer great quality, performance, and affordability. These will allow you to swap an LS into almost anything and provide more clearance than manifolds at the collectors. Our headers are mandrel bent, TIG-welded, and feature a polished stainless steel construction. They also feature V-Band collector construction, collector merge spikes, and include collector stubs, bolts, and graphite manifold gaskets for easy installation.
( 19 )
$289.99
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 384 )
$145.99
—
$288.99
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 36 )
$549.95
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 161 )
$13.99
—
$23.99
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 487 )
$560.00
—
$1,149.99
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 13 )
$389.99
—
$499.99
Chevrolet Performance hydraulic roller lifters are designed as direct replacements for your engine. These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher rpm capability- what more can you ask for?
( 64 )
$475.55
—
$553.04
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$1,349.95
$877.95
—
$1,449.95
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$25.99
—
$328.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
