Filters
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 tranmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 2 )
$1,495.00
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 320 )
$494.95
—
$1,393.95
Transmission Specialties lock-up Street/Strip torque converters have an oversized billet lock-up piston for exceptional durability in all applications. A billet front cover is standard, and all fins are furnaced brazes and Heli brazed for added strength. Stall speed can be set from 2800 to 4500 rpms. No other lock-up converter offers this strength and durability at a fair price. Select the model for your application needs. Product features: * Three New Torrington Bearings * New billet Turbine Splines * Furnace brazed and Heli brazed * XHD billet oversized lock up CI * XHD billet front cover * Computer balanced * Pressure leak tested
( 1 )
$1,004.94
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 185 )
$470.95
—
$537.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$655.95
Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.
( 31 )
$477.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 179 )
$169.95
—
$419.95
An upgrade to the Victor series, these Edelbrock Victor Pro Series 2-piece water pumps are designed for high output racing engines, especially dirt late model and circle track applications. They feature a 2-piece cartridge style design for easy maintenance and improved performance. The 2-piece design features improved symmetrical flow paths resulting in increased flow and requiring less horsepower from the engine. A new aggressive impeller with improved inlet and outlet port designs provides maximum cooling with equal distribution making this water pump highly efficient. All of this helps eliminate hot spots in the engine, producing optimum power from every cylinder. Finally, it features a -2 bleeder screw for quick coolant system bleeding.
( 1 )
$524.95
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 99 )
$395.00
—
$420.00
Mishimoto thermostats are effective in noticeably lowering engine coolant temperatures. These thermostats are built with high-quality wax and are shipped with new rubber gaskets (where applicable) for a good, leak-free seal. They are then digitally calibrated for precise operation. Mishimoto thermostats open up at a slightly lower temperature than OEM or standard thermostats once your engine is fully warmed up. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Whether you have a daily driver or a modified and upgraded turbo, Mishimoto thermostats will maintain optimal temperatures to efficiently cool your application.
( 74 )
$61.95
—
$88.95
Summit Bucks
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$367.95
Summit Bucks
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$384.00
—
$395.00
Summit Bucks
aFe Quantum Pro Dry S cold air intake systems are the latest in airflow technology. From the uniquely integrated filter-to-housing design, to the state-of-the-art lightweight injection-molded base and top Pro Dry S filter, Quantum delivers dyno-proven performance gains, convenience, value—and installs in minutes. Order the model recommended for your vehicle and engine application. aFe Quantum Pro Dry S systems include: * Quantum Pro Dry S performance air filter * Dyno-tuned intake tube * Silicone bellows coupling * Necessary hardware * Filter housing * A hassle-free installation
( 3 )
$372.00
Summit Bucks
aFe Quantum Pro 5R cold air intake systems are the latest in airflow technology. From the uniquely integrated filter-to-housing design, to the state-of-the-art lightweight injection-molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value—and installs in minutes. Order the model recommended for your vehicle and engine application. aFe Quantum Pro 5R systems include: * Quantum Pro 5R performance air filter * Dyno-tuned intake tube * Silicone bellows coupling * Necessary hardware * Filter housing * A hassle-free installation
( 1 )
$361.00
Mishimoto factory fit intercooler boot kits have been released as direct-fit silicone boot kits with DuraCore technology. DuraCore is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, this material provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, the kits include constant-tension T-bolt clamps for accurate and consistent holding power. Keep your truck on the road by upgrading to these Mishimoto factory fit intercooler boot kits.
( 2 )
$266.95
—
$294.95
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,759.95
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 68 )
$395.00
Summit Bucks
aFe Magnum Force Stage 2 air intake systems outflow factory systems by over 30 percent, providing maximum gains of 16 hp and 26 lbs.-ft. of torque. These kits obtain such impressive gains by using CAD-designed and dyno-tuned intake tubes, and either of the two distinctly different types of filters included for your driving style. Both filters use 360 degree flow domes, but one is a 3-layer oil-free design, while the other is a 5-layer, pre-oiled, washable and reusable, high performance filter—each style provides maximum air flow. Give your vehicle better flow and a little kick with aFe Magnum Force Stage 2 air intake systems.
Not Yet Reviewed
$384.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
