Filters
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,763.71
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. Based on the production LS3 engine, these engines use L92-style rectangular-port heads. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. camshaft lift. Long block crate engines also include: * F-body style oil pan, pump and pickup * Harmonic balancer * Front timing cover * Oil Filter
( 5 )
$7,094.42
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,808.31
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,206.16
Chevrolet Performance 6.2L 376 C.I.D. 495 hp engine assemblies feature an impressive 495 hp at 5,570 rpm with 475 lb.-ft. of torque. The assemblies use a production bottom end and the race-tested LS "Hot" cam. With significantly more duration than the stock camshaft, the valves remain open longer allowing these engines to pull in increased amounts of clean air through the large rectangular ports. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engine includes: * Fully assembled long block * Oil pump, pick-up and oil pan * Harmonic balancer * Front timing cover * Oil filter
( 3 )
$7,423.35
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$14,745.07
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 11 )
$7,295.00
—
$8,895.00
Looking for more power for your ride? Want to drop your quarter mile times substantially? Does OEM reliability and parts interchangeability interest you? Well my friend, you've come to the right place. Why bother rebuilding your existing engine with old, used, and worn-out parts when you can step up to brand-new with these affordable crate engines from Chevrolet Performance. You read it right, these engines feature all-new components built and manufactured by the pros at GM.
( 2 )
$6,610.77
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump
Not Yet Reviewed
$9,849.00
—
$14,349.00
BluePrint Engines Chevy LS 376 c.i.d. 530 hp EFI LS3-style long blocks are for those wanting maximum horsepower and durability. Every BluePrint engine is dyno-tested for proven results and backed by their exclusive 30-month/50,000-mile warranty. Specs and components for the Chevy LS 376 crate engines include: * New GM 6.2L block * Nodular iron rotating assembly * Forged connecting rods * Hypereutectic pistons * Aluminum cylinder heads -- 72cc chamber -- 2.165 in. intake/1.600 in. exhaust valves * Roller camshaft -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113 degree lobe separation * Compression ratio 10.7:1 * LS3 intake manifold * Fuel injection included * 90mm DBW throttle body * Coil packs * Oil pan * Valve covers * Timing cover * Water pump * Harmonic balancer * Spark plugs and wires
Not Yet Reviewed
$13,149.00
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! BluePrint Engines Pro Series Chevy LS crate engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * Valve covers * Timing cover
( 1 )
$12,249.00
These TCI 6x 6-speed GM 4L80E automatic transmissions are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmissions are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles.
Not Yet Reviewed
$7,518.95
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$6,715.99
—
$7,438.99
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount
( 2 )
$5,944.99
—
$5,995.99
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without LS engine controller package with wiring harness and gas pedal. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * #42 fuel injectors and returnless fuel rail * Coil packs * Spark plugs and wires * Valve covers * Timing cover
Not Yet Reviewed
$12,849.00
—
$17,049.00
These ATK High Performance Chevy LS 408 short blocks are made to handle some serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. These ATK High Performance Chevy LS 408 short blocks include the following: * GM LS Iron blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons
( 3 )
$5,143.99
These RHS LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. These blocks are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, RHS engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. RHS LS bare race blocks each receive a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357-T6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6 head bolt design with full water jacket around the cylinders' walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear AN-12 side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses that are designed to clear tie bar style lifters
Not Yet Reviewed
$6,575.95
Edelbrock E-Force Corvette C6 stage 1 street-legal supercharger kits are exclusively tailored to boost your performance. The unique features on these kits are 12 in. long intake runners that allow for maximum low-end torque. Plus, these Edelbrock E-Force street legal supercharger kits fit under the stock hood with no modifications.
( 3 )
$9,025.87
—
$9,728.87
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,047.87
—
$8,322.87
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 4 )
$7,553.87
—
$8,607.87
Chevrolet Performance has released its latest factory-engineered LS high-performance engine: the 376/525 LS3 long block. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio, delivering 525 hp at 6,200 rpm and 486 lbs.-ft. torque at 5,200 rpm. (For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.) Using the LS3 production engine—the same used in Corvettes and Camaros—as the foundation for the LS 376/525 helped keep the retail price lower; while the ASA camshaft is a proven, power-building component that's been successful in the high-RPM world of Circle Track racing. The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high RPM. The cam also gives the LS 376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS 376/480 and the carbureted LS 376/515. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications; and some installations for older vehicles will require the oil pan changed. Engine specifications: * Power: 525 hp at 6,200 rpm, 486 lbs.-ft. of torque at 5,200 rpm * Displacement: 376 C.I.D., 6.2L * Bore x Stroke: 4.060 in. x 3.620 in. * Compression Ratio: 10.7:1 * Recommended Fuel: 92 Octane * Block: Cast Aluminum with 6-bolt cross bolted main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Hypereutectic Aluminum * Camshaft: Steel Hydraulic Roller Tappet * Cam Lift: .525 in. Intake / .525 in. Exhaust * Cam Duration at .050 in.: 226 deg. Intake / 236 deg. Exhaust * Lobe Separation: 110 Degree * Cylinder Heads: Aluminum L92 style ports * Combustion Chamber: 68cc * Valves: 2.165 in. Intake/ 1.590 in. Exhaust * Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio * Balance: Internal * Reluctor: 58X * Maximum GM Recommended RPM: 6,600 * GM Recommended Torque Converter Stall 3000-3400 Engine Includes: -- Fully GM assembled long block -- Oil pump, pick-up and Camaro oil pan (12628771) -- Corvette harmonic balancer -- Front timing cover with cam sensor -- Oil filter -- Passenger side RH oil dipstick and tube (not included) (Note: Does not include oil dipstick tube, oil dipstick, or steam crossover tube.)
( 2 )
$7,890.20
Chevrolet Performance LT4 6.2L supercharged wet sump crate engines are engineered for supremacy. These powerhouses are the heart of the Corvette Z06 and feature 1.7L Eaton R1740 TVS superchargers spinning up to 20,000 rpm--enough to generate more than 9 lbs. of boost, along with big horsepower and torque. These LT4 long blocks have several unique features designed to support their higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356 T-6 aluminum cylinder heads that are stronger and handle heat better than conventional castings, lightweight titanium intake valves, and stronger forged aluminum pistons. Technical specs: * Engine type: Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 in. x 3.622 in. * Block: Cast aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal steel * Pistons: Forged aluminum * Compression ratio: 10.0:1 * Camshaft type: Hydraulic roller * Valve lift: .492 in. intake/.551 in. exhaust * Camshaft duration (at .050 in.): 189 degrees intake/223 degrees exhaust * Cylinder heads: A356 T-6 Rotocast aluminum, as-cast with 65.5cc chambers * Valve size: 2.130 in. intake/1.590 in. exhaust * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Please note: Assembly does not include any electronics
( 2 )
$17,917.84
BluePrint Pro Series Chevy LS 427 ci.d. EFI supercharged deluxe long block crate engines deliver 800 hp and 780 lbs.-ft. of torque. They also include LS3 aluminum cylinder heads, forged pistons, hydraulic roller camshaft, forged crankshaft, a Holley Terminator X Max Gen IV complete ECU and harness for engine management, and a polished or black finish accessory drive system. Additional features and specs: -- Block: * BluePrint Engines high-strength cast iron block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.070 in. bore * 6-bolt main * One-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers * Compression ratio: 11:1 -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads * 70cc chamber * 2.165 in. intake / 1.600 in. exhaust valves * 259cc intake / 102cc exhaust runners -- Cam Specs: * Hydraulic roller * .624 intake / .624 exhaust lift * 239 intake / 255 exhaust duration * At .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration -- Also Includes: * Holley Terminator X Max - Gen IV complete ECU/Harness EFI system * Magnuson TVS2650 supercharger * Coil packs * Valve covers * Oil pan * All sensors required for engine to run * Drive-by-wire throttle body * Timing cover * Spark plugs and wires * Harmonic balancer * Front accessory drive with power steering pump, water pump, alternator, and air compressor -- Notes: * Not for use in pollution-controlled vehicles. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$25,249.00
—
$25,349.00
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$5,290.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
