Availability
Showing In Stock Items. Show All 106 Items.
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 102 )
$329.00
—
$429.00
Using the latest technology, J.W. Performance has come up with these Ultra-Bell bellhousings. Built rugged and certified, these flexplate shields allow for special motor and transmission combinations to be easily mated together. Manufactured from one-piece cast aluminum, these Ultra-Bells are five times stronger than stock bellhousings, which makes them capable of withstanding even the most severe tire shake and can fit under most stock floorboards. Order the Ultra-Bell bellhousing designed to fit your application.
( 79 )
$469.88
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 227 )
$415.00
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 195 )
$469.99
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 9 )
$288.99
—
$318.99
ACDelco GM Genuine Parts CV axle shafts transfer torque from your vehicle's transmission or differential to its wheels, and are GM-recommended replacements for your vehicle's original components. These shafts have constant velocity (CV) universal joints at each end to allow your wheels and suspension to articulate. The axle shafts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model recommended for your specific application.
( 15 )
$295.99
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 72 )
$299.00
FTI Performance is an industry leader in manufacturing transmissions and replacement parts—particularly for racing applications. These bellhousings are where the transmission connects to the engine. They cover the flywheel and the clutch or torque converter. FTI bellhousings are produced from premium materials, engineered to exacting specifications, and available for a variety of transmissions. Order the model recommended for your vehicle.
( 3 )
$319.00
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 47 )
$382.50
—
$505.75
Our Summit Racing™ SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Available in several internally and externally balanced applications. NOT FOR MARINE APPLICATIONS.
( 498 )
$434.99
Chevrolet Performance offers these clutch kits for many GM applications. Each kit is a direct replacement for the factory original and includes a pressure plate and clutch disc.
( 12 )
$549.99
On Sale
Hurst Billet/Plus shifters are the next generation of competition transmission controls. Designed with a high-pivot mechanism for reduced shifter throw and a patented design for ease of operation, they feature an anodized gold base, polymide pivot cup for reduced vibration, high-strength steel stick, and a heat-treated billet steel gear selector for the ultimate in strength and reliability. The shifters are available for more than a dozen types of transmissions. Order the model tailored to your vehicle application.
( 126 )
$499.95
$324.95
—
$499.95
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$285.95
—
$514.99
Reid Racing bellhousings are cast from high-strength 6061 T-6 aluminum and are heat-treated for additional toughness. These bellhousings pass stringent SFI 30.1 certification and are approved with no external shields required. The bellhousings feature an open bottom for easy converter access, a reduced diameter for better floorboard clearance, and a contoured mounting flange to properly match the rear of the engine block. No special flexplate is required. They are available for the Reid Racing Superglide and Super Hydra 400 transmissions.
( 8 )
$499.00
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 132 )
$279.00
—
$445.00
Silver Sport front shift kits allow you to move the shifter from the stock rear location to the front at a more bench seat friendly 13.5 in. behind the clutch housing on specific 6-speed transmissions. They feature SST's short throw, billet shift tower with a compact and efficient design and accepts popular 2-bolt style handles. They include detailed instructions to walk you through the conversion.
( 2 )
$399.95
—
$439.95
The Wheel precision-machined flexplates from J.W. Performance feature double-welded, high-quality ring gear and the highest quality steel centers. They are designed to take the punishment of today's high-horsepower revving motors from street to ProMod applications. All of J.W.'s flexplates are SFI-certified and have a replaceable ring gear. They're available in a heavyweight style for quicker launches and more rpm during the shift, or in a lightweight style for faster turbo spool time and improved engine response in street, Circle Track, and road race applications.
( 32 )
$424.97
Whether you have a big block or a small block, you can be sure that Chevrolet Performance has you covered. Chevrolet Performance has high-quality nodular iron and billet steel flywheels to fit your needs, no matter what flavor of V8 interests you.
( 27 )
$432.99
ACDelco GM Genuine Parts wheel hubs provide the attachment point for the brake rotor and road wheel, and are GM-recommended replacements for your vehicle's original components. These OE hubs are supported and allowed to rotate by the wheel bearing. They've been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Notes: * Do not operate a vehicle with a worn wheel hub assembly. Here are warning signs to look for: - Grinding when the vehicle is in motion - Knocking or clunking - Looseness - Wheel vibration and/or wobble - Humming, rumbling, squealing, roaring, or growling - ABS, Traction Control, Stability Control light on
Not Yet Reviewed
$281.99
Summit Racing™ offers Street-Strip Performance clutch kits for hundreds of cars, trucks, and vans. They're ideal for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. These kits provide a heavier pedal effort than stock, along with improved holding capacity, making them excellent high performance replacement clutches. Order the size and options recommended for your vehicle. Additional details: * Can accommodate up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity * Kits include a pressure plate, disc, throwout bearing (unless specified otherwise), and alignment tool
( 5 )
$375.99
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
Not Yet Reviewed
$279.99
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$364.33
—
$431.10
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$378.95
—
$466.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$287.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
