Availability
Dakota Digital HDX direct-fit analog gauge systems feature the latest in aftermarket automotive instrumentation technology. They take personalization and usability to a whole new dimension, while retaining your favorite features from the wildly popular VHX-Series, such as LED backlighting for the numbers, tick marks, and dead-faced dash indicators (turn signals, high beam, check engine, cruise control engaged, and parking brake). Illuminated needles and a lifetime warranty are still part of the deal as well. These features add up to clean, easy-to-read instrument systems in all conditions. Precision stepper motors provide accurate needle movement, along with a full sweep at key-on, and the needle hubs are black nickel plated spun-aluminum. Dakota Digital HDX direct-fit analog gauge systems are available with your choice of black or silver alloy gauge-face styling. The systems allow the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays. RGB LEDs are incorporated into the circuit boards for fully adjustable display colors, allowing the user to personalize their instrument system to match nearly any vehicle theme.
( 54 )
$1,543.75
Changing tire and gear sizes can have an adverse effect on your speedometer and odometer readings. To correct this, Hypertech has assembled some of the best features from their series of programmers and tuners into one stand-alone unit. Hypertech speedometer calibrators will adjust for a wide range of tire sizes and gear changes (not all applications can adjust for gear changes) to keep your speedometer reading properly without the additional cost of buying a complete tuner. Installation is as easy as plugging one of the calibrators into your vehicle's OBDII diagnostic port, and while you're there, they can even read and clear diagnostic trouble codes.
( 46 )
$224.09
—
$279.95
Chevrolet Performance oil pressure sending units are designed to work with the LS7 motors. They furnish important data to your dash panel gauge. These factory-recommended replacements will fit dozens of applications from Chevy, GMC, Cadillac, and Pontiac.
Not Yet Reviewed
$132.99
Improved Racing's C5 Corvette oil temperature sensors function identically to the factory sensors, but uses the more common 1/8 in. NPT threads and features an extended wire harness for convenience. The factory C5 Corvette oil temp sensors utilize M12 threads, which are not compatible with most aftermarket oil cooler adapters and sensor blocks. These custom units feature the same resistance curve as the factory units for accurate temperature readings with the factory gauges, but are compatible with any oil cooler adapter or sensor block that accepts an 1/8 in. NPT sensor. If you are installing an oil cooler on your C5 Corvette, this is the sensor to use!
( 2 )
$29.00
Earl's Performance offers handy kits with all parts needed to install a mechanical oil pressure gauge on most engines with a 1/8 in. NPT, 1/4 in. NPT, or 1/8 in. BSPT (British Standard Pipe Thread) port on the engine block. Kits include the extended oil pressure adapter, BSPT adapter, reducer, pre-made -3 AN Speed-Seal hose assembly, and two adapters for the gauge end of the hose. The braided stainless steel lines are available in different lengths. These kits are ideal for engine swaps and race cars that use a mechanical oil pressure gauge. Product details at a glance: * Kit includes adapters and hose for mechanical oil pressure gauge on most engines * Includes most common adapters needed for installation of gauge * Block adapters: Extended Oil Pressure Gauge Adapter -3 AN to 1/8 in. NPT (968803ERL), and 1/8 in. BSPT to 1/8 in. NPT female adapter (968698ERL) * Reducer bushing: 1/4 in. NPT male to 1/8 in. NPT female (SS991201ERL) * Pre-made crimped style Speed-Seal hose assembly -3 AN straight to 90 degree ends * Gauge adapters: -3 AN to 1/8 in. NPT female straight and 90 degree (968703ERL and 968603ERL) steel with nickel plating * Ideal for plumbing mechanical oil pressure gauge with 1/8 in. NPT inlet port
( 1 )
$66.59
PowerTune's Digital Ultrawide V5 dashes are revolutionary 10.4 in. QLED digital displays that will transform your driving experience and empower you with real-time insights like never before! Select the dash with the ECU cable needed for your setup. Features: * An amazing resolution of 1600 x 720 pixels * 10-point capacitive multi-touch panel with QLED Quantum Dot technology * Displays supported real time ECU data and can also work completely standalone with 16 direct inputs for tachometer, sensors, fuel level and more * Wide range of compatibility with aftermarket and factory ECUs * Live, real-time display of ECU data * 16 (8+8) configurable analog and digital inputs (voltage or resistance based) * Integrated 10Hz GPS kit * Customize screen layouts to your desired sensor outputs, display themes, preferred rpm, and shift light settings * Set customized gauge warnings and master warnings for sensor ranges and states * Make display adjustments for speed corrections (changed wheel size, inaccurate mechanical gauges), lambda to AFR conversions, MPH/KPH and more * Virtual drag/quarter mile timer for digital time slips * Lap timer and data logger included * Regular software updates and strong customer service ensures your investment evolves over time Includes: * PowerTune Digital Ultrawide Dash * 1.5 m harness for power and CAN communication * CAN I/O extender plus GPS antenna * 12-month hardware warranty plus, free technical support
Not Yet Reviewed
$1,105.99
On Sale
Holley EFI 6.86 in. dash bezels are available for muscle car and truck applications. Designed to work with Holley dashes, the bezels are made from a 5/32 in. thick UV-resistant ABS composite material and structurally as strong or stronger than the OEM panels. Holley EFI dash bezels come in a matte black finish that will accent your interior.
( 4 )
$399.95
Hypertech's In-Line Speedometer Calibrator Modules are an in-line module that corrects your vehicles speedometer and odometer for unlimited tires sizes and/or rear gear ratios. These modules are perfect for vehicles with computers that don't allow for tire size and/or rear gear ratio correction or want to re-calibrate for sizes outside the range of programmers. Installation is a snap. Using the included USB cable, connect the Hypertech In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, simply disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster, and you¹re done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).
( 20 )
$249.95
Holley EFI 7.5 in. dash bezels are designed to work with your Holley EFI dash (sold separately). The dash bezels have a quality UV-resistant ABS composite construction for strength beyond the OEM panels. The bezels are offered in finishes to enhance your vehicle's interior. Order the Holley EFI 7.5 in. dash bezel in the finish and application designed to meet your needs.
Not Yet Reviewed
$399.95
Summit Bucks
Directly compatible and built for enduring performance, ACDelco fuel tank sending unit gaskets deliver a reliable, affordable option that restores full functionality to your ride. These seals are available in a variety of configurations for specific applications. ACDelco is a leading automotive aftermarket supplier of OE-replacement products, with a specialty in GM original parts. Features include: * Built with premium materials for prolonged service * Precisely engineered to OE specifications * Trouble-free installation and function ensured by rigorous testing procedures * Designed for direct compatibility
( 4 )
$6.99
—
$73.99
Stewart Warner replacement senders are used with electrical gauges. They offer senders for electric oil, fuel pressure, and electric temperature gauges. Stewart Warner Performance replacement senders are designed to be used with Stewart Warner Performance gauges.
( 191 )
$37.99
Nothing's more annoying than a leak. If you're experiencing this issue from the area where the speedometer cable attaches to the transmission housing, it's time to replace the speedometer drive pinion seals. ATP pinion gear seals offer an exact fit that meets or exceeds original equipment specs. They're available in different sizes and diameters for a wide range of vehicles with GM transmissions. With the help of ATP speedometer pinion seals, you can fix gear leaks and keep lubricant off your driveway or garage floor.
( 3 )
$2.99
Dorman oil pressure sensors are direct replacements for your failed originals on specific applications. They are ruggedly designed and built to withstand required operating pressures and temperatures. These cost-effective solutions will provide an OE fit and function for reliable performance and an easy install. Trust Dorman oil pressure sensors to restore accurate readings.
Not Yet Reviewed
$42.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$25.99
Replace those old oil pressure sending units with a quality piece from Standard Motor Products. Their replacement oil pressure warning light sending units are designed to meet OEM specifications. You can trust your electrical system when you put it in the hands of Standard Motor Products.
( 34 )
$10.99
Bring your dash "up to speed" with Summit Racing™ Direct-Fit Restoration instrument gauge panel assemblies. Constructed of high-quality components to ensure performance and dependability, they will help you to keep an accurate eye on your car's vitals while providing a fresh appearance. If you're looking to finish your project car and need new instrument gauges, our Summit Racing™ instrument gauge panel assemblies will provide the fit, function, and style, along with the value you desire for a successful build.
Not Yet Reviewed
$462.99
On Sale
AutoMeter Cobalt instrument clusters outfit your classic muscle car or truck with direct-fit kits that offer a custom performance solution without the custom price! The Cobalt kits include a set of six iconic AutoMeter gauges that feature modern blue LED through-the-dial lighting to provide clear visibility during nighttime use, plus a rugged, durable, and paintable thermoformed ABS plastic dash panel. The instrument clusters are easy to install and require no cutting or modifications to your original dash. They also are designed with cutouts, where applicable, for factory accessory controls, air vents, and radio. Track your engine's vitals in real-time with highly responsive and accurate electric air-core gauges inside AutoMeter Cobalt instrument clusters. Your AutoMeter Cobalt instrument clusters include: * Cobalt electric speedometer and tachometer, electric fuel level, water temperature, oil pressure, and voltmeter * Universal 6-gauge wire harness, electric speed sender, 1/8 in. NPT water temp and oil pressure senders with 1/4 in., 3/8 in., and 1/2 in. NPT adapter fittings, LED lighting dimmer, 3 optional LED indicators (2 green, 1 amber), and installation instructions
( 1 )
$1,445.99
$1,300.99
On Sale
AutoMeter Phantom instrument clusters are available in a variety of 6-gauge layouts. These replacement dials are available mounted in direct-fit replacement dash panels. The easy-to-install packages include stunning Phantom gauges (of different diameters), featuring bold black numerals on a white background for a clean and easily readable look. Black bezels and panels provide a stylish, modern contrast. AutoMeter cluster layouts are application-specific for classic muscle cars, trucks, and more. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,360.99
$1,224.89
Standard Motor T-Series oil pressure warning light sending units are designed to meet the original equipment form, fit, and function. Don't take chances with old, questionable, or faulty OE parts that can leave you stranded. Replace them with new ones from Standard Motor Products.
( 2 )
$4.99
Are you having trouble with your factory gauges? Dorman OEM remanufactured instrument clusters are just what you need to get your ride back on the road. They are fully calibrated with your vehicle's VIN and mileage, so there's no scan tool or dealer programming required. The clusters feature all-new stepper motors using the latest upgraded designs and have all-new backlight bulbs. Specify vehicle make, model, VIN, and current mileage when ordering.
( 242 )
$259.95
—
$648.99
Dorman OEM remanufactured digital instrument clusters use new replacement parts for best performance, including new stepper motors, backlighting bulbs, and filament units. These clusters restore your various gauges to proper operation with accurate readings. Installation is easy, because they're a direct-fit for the factory originals. Dorman OEM remanufactured digital instrument clusters are vehicle simulator-tested to guarantee their quality. Order the size and specs to match your vehicle.
( 4 )
$360.99
—
$831.95
PowerTune Digital dash V5 displays provide the same cool display that you often find in professional race cars. These revolutionary dashes are the ultimate automotive display and will transform your driving experience. Imagine having all your essential vehicle data right at your fingertips, displayed on a sleek, high-definition digital dashboard. These monitors are designed to provide you with real-time performance metrics, allowing you to stay informed and make data-driven decisions while you're on the road. The days of having 10 different gauges are no more when you order the PowerTune Digital dash V5 display best suited for your application. More product features, items, and specifications include: * Live, real-time display of ECU data, including all sensors that it reads (OBD2 protocol required; aftermarket ECUs not currently supported) * Customizable to your desired sensor outputs, display themes, preferred rpm, and shift light settings * Adjust for speed corrections (new wheel sizes, inaccurate mechanical gauges) * LCD 7 in. display that is completely visible with direct sunlight * Virtual drag/quarter mile timer * PowerTune Digital software and ECU communication protocols (plug-and-play for a wide variety of vehicles) * PowerTune Digital dash with quad-core onboard processor and protective case that also holds components * Vehicle wire-in power supply (1 to 3 meters, 12 V to 5 V, 3 amp) * Interface CAN cable adapter to plug directly to your ECU (excludes Apexi Power FC, requires FC Hako/Datalogit cable) * Available GPS and mounting brackets (some available separately) depending on the models chosen * Cigarette lighter charger available separately (special order)
Not Yet Reviewed
$626.99
On Sale
AutoMeter Chrono instrument clusters are available in a variety of 5- and 6-gauge collections. These replacement gauges are available mounted in direct-fit replacement dash panels, if you choose. The easy-to-install packages include stunning Chrono gauges (of different diameters), featuring timepiece-inspired three dimensional dials and clear anodized polished aluminum bezels. AutoMeter cluster layouts are application-specific, featuring either black or silver dash panels. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,711.99
$1,540.79
On Sale
Replace your factory gauges with one of AutoMeter's Amercian Muscle instrument clusters. These analog gauges feature advanced hybrid dial technology. They combine AutoMeter's signature white high-definition LED illumination and glowing red pointers for maximum readability. Each gauge has an authentic spun aluminum dial featuring embossed details and chrome bezels for a unique, classic look. The gauges come pre-assembled in factory black with chrome bezels. Best of all, the clusters plug directly into factory instrument boards without modification. They're available in a variety of sizes and layouts for specific vehicle applications.
( 7 )
$1,611.99
$1,450.79
Modal Header