Availability
Showing In Stock Items. Show All 49 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$15.99
—
$18.99
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 17 )
$40.99
—
$72.99
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$19.99
ICT oil galley barbells have a "weighty" job to perform. Often overlooked, but very much needed, these oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. Little things may cause a big headache; for your build, replace the plastic barbell with a new one from ICT Billet.
( 1 )
$35.99
Where legally permissible when doing an LS or LT swap, ICT Billet fuel vapor purge solenoid plugs make life easier by blocking off the intake manifold EVAP port. They can be installed in seconds and come packaged and ready to go.
( 25 )
$22.99
CA offers accelerator pedal position sensor and harness conversion kits for a variety of applications, including Chevy Corvette C5 models from the 1990s and early 2000s. These sensor kits are manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$229.99
ICT Billet has made their name known by making the hard to find items that always slow down your LS swap, and this time it's no different. The ICT Billet camshaft position sensor delete plugs are the answer to your cam swap issues. Made from high-quality materials, and including the hardware needed these kits are designed with ease and reliability in mind.
( 2 )
$58.99
Allstar Performance oil galley plugs are used by the factory to divert oil to the factory oil filter and prevent unfiltered oil from circulating through the engine. The original GM barbells are a nylon material that may become brittle over time and should be replaced when performing a rebuild or upgrades. These replacement galley plugs are offered in multiple materials for a variety of year/make and engine applications.
( 4 )
$13.99
—
$26.39
ICT Billet coolant crossover delete kits are coolant/steam port block-off plate sets for LS-Series engines. Kits include two coolant ports, two O-rings, and two bolts. These kits do not have holes for crossover tube attachment. Made from aerospace-grade billet aluminum with a natural finish, they can be installed on the front or rear of the cylinder heads.
( 12 )
$29.99
ICT Billet remote mount water pump adapters are made from aerospace-grade billet aluminum. Plates, fittings, bolts, and gaskets are included. Remote-mount your water pump with the performance and style of ICT Billet adapter kits.
( 2 )
$85.99
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$11.99
ICT Billet oil level sensor and sending unit plugs are available for a variety of engines. They can be used when deleting or relocating your oil pressure sending unit--or to delete the oil level sensor in your factory oil pan. These quality delete plugs are made of aluminum and include a crush washer or O-ring, depending on the application.
( 11 )
$13.99
—
$17.99
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 5 )
$20.00
Dura-Bond provides quality replacement oil galley plugs for engine block rebuilds and repairs. These oil galley plugs divert the flow of oil in the engine block where needed. They are engineered to OE replacement tolerances.
Not Yet Reviewed
$3.99
Need an engine block coolant drain plug? ICT Billet threaded coolant plugs will fit your LS/LT block. If you need to drain your engine of coolant, replace old plugs with new ICT billet plugs.
( 1 )
$58.99
Derale Performance transmission line fittings will help you adapt your existing transmission lines to the transmission cooler. Made of durable aluminum, these fittings are corrosion-resistant for a lifetime of good use.
( 44 )
$16.69
—
$17.16
ICT Billet offers fuel pressure regulator bypass plugs for a variety of applications. They install in place of the factory integrated regulator that is mounted to the fuel rail on truck intake manifolds. These plugs are required when using an external fuel pressure regulator. Machined from aerospace-grade billet aluminum, the plugs are compatible with LS Gen 3 truck/SUV round fuel rails. They include an O-ring and re-use the factory retainer clip. Order the model designed for your vehicle.
( 1 )
$29.99
Trick Flow® engine coolant plugs for GM LS are for coolant holes on exhaust faces. They are zinc plated steel with a hex head/13mm wrench and include an aluminum sealing washer. These Trick Flow® coolant plugs fit all LS cylinder heads.
( 2 )
$14.99
FAST makes it easy to keep your LSXR intake manifold in perfect working condition. FAST provides all of the necessary replacement parts you may need for regular service work or to repair unforeseen damage—including these LSXR intake manifold purge fittings. Order the components needed to maintain your application.
Not Yet Reviewed
$19.95
Replacing your factory fuel lines? With ICT Billet fuel pressure sensor adapters, you can easily replace them with braided hose and retain your factory fuel pressure sensor. Made from aerospace grade billet aluminum and available in -6AN, -8AN, or 1/8 in. NPT. ICT Billet fuel pressure sensor adapters keep you connected.
Not Yet Reviewed
$36.99
Plumb all four corners of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes with Trick Flow®. Your 4-corner plumbing kits include: * Two 2 ft. 1/4 in. black rubber hoses * Twelve 9/16 in. hose clamps * Four 4 AN 90 degree fittings * Stainless steel tee barb fitting * Stainless steel cross barb fitting
( 4 )
$62.99
Chevrolet Performance engine coolant bypass seals restore leak-free efficiency. These genuine items offer more than the perfect fit and function for your GM application--they provide you with reliability and peace of mind, knowing that they are exactly like the originals. Get the best for your vehicle's coolant system by using Chevrolet Performance engine coolant bypass seals.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
