Availability
Showing In Stock Items. Show All 62 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
Summit Racing™ Coolant Steam Port crossover kits deliver cool performance and looks. Featuring beautiful billet aluminum construction, our kits will bypass the hot engine coolant from your throttle body for better performance and vent the steam from the front of the cylinder heads to the radiator or balance the flow between the rear of heads to help reduce engine temperature. Keep your engine happy and running at an optimal level with Summit Racing™ Coolant Steam Port Crossover Kits.
( 13 )
$39.99
—
$48.99
ICT oil galley barbells have a "weighty" job to perform. Often overlooked, but very much needed, these oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. Little things may cause a big headache; for your build, replace the plastic barbell with a new one from ICT Billet.
( 1 )
$35.99
Where legally permissible when doing an LS or LT swap, ICT Billet fuel vapor purge solenoid plugs make life easier by blocking off the intake manifold EVAP port. They can be installed in seconds and come packaged and ready to go.
( 25 )
$22.99
Allstar Performance oil galley plugs are used by the factory to divert oil to the factory oil filter and prevent unfiltered oil from circulating through the engine. The original GM barbells are a nylon material that may become brittle over time and should be replaced when performing a rebuild or upgrades. These replacement galley plugs are offered in multiple materials for a variety of year/make and engine applications.
( 4 )
$26.39
ICT Billet coolant crossover delete kits are coolant/steam port block-off plate sets for LS-Series engines. Kits include two coolant ports, two O-rings, and two bolts. These kits do not have holes for crossover tube attachment. Made from aerospace-grade billet aluminum with a natural finish, they can be installed on the front or rear of the cylinder heads.
( 12 )
$29.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$23.99
—
$42.99
Summit Racing™ heater bypass hoses are perfect when deleting your heater core. These hoses allow engine coolant to flow without any restrictions. Made from high-quality silicone, these hoses can withstand the hottest of coolant temperatures. Summit™ heater bypass hoses make deleting your heater core easy.
( 5 )
$21.99
ACDelco fuel pressure regulator vacuum lines are designed utilizing the latest technology. These factory-recommended replacement parts offering the same quality, reliability, and durability of GM OE specifications for exact fit, form, and function.
( 3 )
$25.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$20.99
—
$27.99
ICT Billet offers fuel pressure regulator bypass plugs for a variety of applications. They install in place of the factory integrated regulator that is mounted to the fuel rail on truck intake manifolds. These plugs are required when using an external fuel pressure regulator. Machined from aerospace-grade billet aluminum, the plugs are compatible with LS Gen 3 truck/SUV round fuel rails. They include an O-ring and re-use the factory retainer clip. Order the model designed for your vehicle.
( 1 )
$29.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$20.99
—
$52.99
Beat the heat with ACDelco's GM original equipment air conditioning hoses. They help you make repairs to your GM vehicle's leaking A/C system and get the cool air flowing once again. These hose assemblies also work with GM vehicles with rear A/C—where applicable; they include the auxiliary evaporator connecting hose and proper lines to connect the rear evaporator to the front A/C lines. ACDelco designs these air conditioning hoses to deliver the quality, performance, durability, and long service life you've come to expect from General Motors. Hundreds of configurations are available, with or without fittings included. Order the line recommended for your application.
( 10 )
$51.99
Replacing your factory fuel lines? With ICT Billet fuel pressure sensor adapters, you can easily replace them with braided hose and retain your factory fuel pressure sensor. Made from aerospace grade billet aluminum and available in -6AN, -8AN, or 1/8 in. NPT. ICT Billet fuel pressure sensor adapters keep you connected.
Not Yet Reviewed
$36.99
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 17 )
$40.99
UAC takes great pride in their extensive line of hose assemblies, and since hoses are responsible for the weighty task of carrying refrigerant around your A/C system, extensive engineering care and precision is taken, ensuring each assembly is properly produced and meets OE specifications. Universal Air Conditioner offers air conditioning suction and discharge hose assemblies for a wide range of automotive applications. They are manufactured with quality materials to provide the correct fit and performance just like the originals they are replacing. Choose the assembly designed for your vehicle.
( 10 )
$34.99
—
$54.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$20.99
—
$48.99
Chevrolet Performance power steering hoses carry pressurized fluid from the power steering pump to the steering assembly in order to turn the wheels to the left or right. The silver heat guard helps to protect the hoses in high-temperature areas, and fluid restrictors help to absorb vibration and reduce noise. Double-lock beading with barbed tube ends provides crimping and assists in leak prevention. Order the model designed for your vehicle and engine application.
( 1 )
$28.99
UAC offers air conditioning suction hose assemblies for a wide range of automotive applications. These aluminum/rubber replacements will help to restore original performance in your A/C system. United Air Conditioner takes great pride in their extensive line of hose assemblies. Since hoses are responsible for the weighty task of carrying refrigerant around your A/C system, engineering care and precision is taken to ensure they're properly produced and meet OE specifications. UAC's internal "QFP" (Quality, Fit, and Price) philosophy has been instrumental in ensuring that the company carries the most comprehensive line of hose assemblies in the market. Order the model recommended for your vehicle.
( 4 )
$20.99
—
$31.99
Plumb just the front of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes. Your engine front-only plumbing kits include: * 2 ft. 1/4 in. black rubber hose * Six 1/4 in. hose clamps * Two 4 AN 90 degree fittings * Stainless steel tee barb fitting
Not Yet Reviewed
$42.99
UAC offers air conditioning suction and liquid hose assemblies for a wide range of automotive applications. These aluminum/rubber replacements will help to restore original performance in your A/C system. United Air Conditioner takes great pride in their extensive line of hose assemblies. Since hoses are responsible for the weighty task of carrying refrigerant around your A/C system, engineering care and precision is taken to ensure they're properly produced and meet OE specifications. UAC's internal "QFP" (Quality, Fit, and Price) philosophy has been instrumental in ensuring that the company carries the most comprehensive line of hose assemblies in the market. Order the model recommended for your vehicle.
Not Yet Reviewed
$27.99
—
$41.99
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$36.99
If your braking capabilities feel softer or less responsive, you could have a collapsed or broken brake hose. Fine Lines brake hose kits provide everything needed from the necessary brake hoses to all the necessary hardware, saving you time hunting down the correct brake hose fittings and clips. Available for countless makes and models, they are offered in rubber or braided stainless for front, rear, or both front and rear jobs. Choose the kit designed for your vehicle.
Not Yet Reviewed
$45.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
