Availability
Showing In Stock Items. Show All 133 Items.
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 117 )
$19.99
—
$20.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$12.99
—
$18.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 46 )
$13.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$19.99
—
$23.99
ACDelco GM Genuine Parts engine valve lifter guides keep the lifters from rotating. These GM-recommended replacements deliver peace of mind that the fit, form, and function are of the highest standards. Order the guides designed for your GM year/make and engine application.
( 5 )
$13.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$17.99
Our Summit Racing™ brass freeze plugs were designed for marine use, but you landlocked guys will get a lot of use out of them, too. All of the necessary plugs are included.
( 101 )
$16.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 94 )
$10.99
—
$21.99
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$11.99
—
$18.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$18.99
Get smooth valvetrain performance! Chevrolet Performance LS rocker arms install easily on your LS cylinder heads without any modifications. Add some additional horsepower and increase your rpm capability with a set of Chevrolet Performance LS rocker arms.
( 3 )
$18.99
—
$19.99
BTR camshaft retainer plates are designed to fit behind the front cover and support greater cam loads for Gen III/Gen IV LS-based engines. They act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. A specially designed gray O-ring seal keeps your oil sealed in. When modifying your valvetrain for better performance—don't forget BTR camshaft retainer plates!
( 7 )
$19.99
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, LT, and LS-based engine applications from the 1990s and up.
( 89 )
$15.99
—
$19.99
Trick Flow® timing chain dampeners provide a small amount of tension on the timing chain to keep it from "whipping" on gear changes. They are manufactured from durable OE plastic and include the necessary mounting bracket. The dampeners are designed for use on Chevrolet LS2 and LS3 Series engines without VVT (variable valve timing).
( 34 )
$19.99
From the leader in performance cooling, Derale oil galley bypass plugs for Gen III and IV LS engines helps improve flow, oil pressure, and completely block dirty engine oil from bypassing the filter with a triple O-ring design. A direct replacement for the plastic OEM barbell plug, they are made from 6061 T-6 billet aluminum and black anodized. Derale plugs have three preinstalled Viton® O-rings and threaded #6-32 holes for easy installation.
( 4 )
$21.49
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 22 )
$21.99
Chevrolet Performance LSX block lifter guides are designed specifically for use on Chevrolet Performance LSX blocks. These 8 in. x 4 in. x 4 in. composite lifter guides will help properly complete your build or repair so you can get back on the road. Don't take chances with arbitrary inexpensive versions—order Chevrolet Performance LSX block lifter guides.
Not Yet Reviewed
$19.84
Melling spin-on oil filter adapters convert the oil filter landing on the engine block to an oil passage. They are made for use with a remote cooler and/or a remote filter.
( 21 )
$19.99
BTR rocker arm bolts are rough and tough. They provide the correct fit and performance, matching that of the originals. Featuring steel construction, precise threads, and a black oxide coating, BTR's bolts are available individually and in sets for many applications.
( 6 )
$17.99
Securing your timing cover is easier than ever with ARP timing cover bolt kits. You can choose between polished stainless steel and chromoly black oxide finishes. They are available in your choice of standard hex or compact 12-point style heads, and washers are included.
( 221 )
$18.99
—
$19.99
For stock replacement rod bearings with perfect fit and function, choose Chevrolet Performance. Available for your LS-Series and big block engines, these rod bearings offer worry-free performance for your big horsepower. When you need originals, go to the original--Chevrolet Performance connecting rod bearings.
Not Yet Reviewed
$21.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 163 )
$17.99
Melling replacement timing chains are available in several styles—single or double roller, link belt, or non-roller—for fitment on countless year/make/model vehicles. A key link in your engine, timing chains synchronize and transfer energy from the crankshaft to the camshaft, controlling when the intake and exhaust valves open. These solid-bushing chains offer a true bearing surface that rolls with the sprockets, eliminating chain stretch. Order the replacement designed for your specific application.
( 3 )
$17.99
Melling timing chain dampeners will get you back on the road. Manufactured from OE-quality materials, these replacements will provide the proper amount of tension on the timing chain to keep it from "whipping" during gear changes. They meet or exceed OEM performance requirements, and are available for fitment on the right and left side. Keep your engine running smoothly; enhance the life of your engine's timing system with Melling timing chain dampeners.
( 1 )
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
