Availability
Showing In Stock Items. Show All 86 Items.
Summit Racing™ Coolant Steam Port crossover kits deliver cool performance and looks. Featuring beautiful billet aluminum construction, our kits will bypass the hot engine coolant from your throttle body for better performance and vent the steam from the front of the cylinder heads to the radiator or balance the flow between the rear of heads to help reduce engine temperature. Keep your engine happy and running at an optimal level with Summit Racing™ Coolant Steam Port Crossover Kits.
( 13 )
$39.99
—
$48.99
Summit Racing™ LS fuel filters with built-in regulator make it easy when getting more fuel to your engine. They are Corvette- style, 58 psi-rated fuel filter/regulators with a 5 nominal micron rating. The bypass design allows you to run one inlet with one outlet to the engine and a return outlet back to the tank. Summit Racing™ universal LS fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap.
( 44 )
$34.99
Old cables can break, become slack, or stick. Sound familiar? Maybe it's time to replace your vehicle's worn cables with Summit Racing™ braided throttle cable kits. They include a braided stainless wire cable and jacket, along with correct fittings. The throttle cable comes in different lengths to suit your application needs. When you step on the gas pedal, get the acceleration you expect with a new throttle cable kit from Summit Racing™!
( 100 )
$44.99
—
$45.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$49.99
FiTech throttle cable brackets offer the best mounting and security for your FiTech EFI system. They are manufactured from strong steel and powdercoated black for lasting good looks.
( 17 )
$37.00
UREMCO remanufactured fuel injectors work like new! How so? United Remanufacturing uses the best quality cores and fully cleans the injector bodies, removing dirt, carbon deposits, and grease. Plus, they replace all O-rings, damaged pintles, and filter baskets. These fuel injectors are stringently monitored, inspected, and tested to ensure that they meet or exceed all OEM specifications for optimal performance. UREMCO builds fuel injectors to fit many makes and models, and each and every one ensures consistent spray patterns with dependability, wear resistance, and value. Replace your fuel injectors with like-new remanufactured fuel injectors from United Remanufacturing Company.
( 73 )
$30.99
Make your LS engine swap just a bit easier by incorporating Tanks Inc. LS fuel filter pressure regulators. They feature a fixed pressure set at 58 psi and an internal fuel filter with a nominal micron rating of 5. The bypass-style design has one inlet, one outlet, and one return. Tanks Inc. LS fuel filter regulators are offered individually or as a kit with quick-disconnect fittings.
( 39 )
$34.99
Get connected with ICT Billet throttle body adapters. These adapter plates are offered for several different applications and are all made from aerospace-grade billet aluminum. Adapter plates are available in a variety of straight and tapered through-hole diameters.
( 30 )
$34.99
—
$51.99
Whether you are replacing a rusted crossover pipe or doing a head swap, ICT Billet coolant crossover kits help increase the flow of coolant through the engine block, reducing engine temperature. They are made from aerospace-grade billet aluminum with a natural finish. By increasing the flow of coolant in the block, thereby reducing engine temperature, you can eliminate hot cylinders and detonation.
( 30 )
$43.99
—
$52.99
FAST LSXR LS3/LS7 fuel injector spacers are designed to extend your short OEM fuel injectors to the same length as the longer-style injectors. These kits include spacers and O-rings.
( 18 )
$55.95
Holley throttle cable brackets are a nice finishing touch for street rods, street machines, or street/strip cars and trucks. The brackets are available in a variety of mounting styles, and for use with nearly a dozen carburetor models. Brackets for fuel injection style applications are also offered. Choose from among materials and finishes like anodized aluminum and chrome or plated steel. These throttle cable accessories can be ordered for universal or carb-specific replacement.
( 185 )
$32.89
Affix your intake manifold with ICT Billet bolt kits. These strong steel fasteners hold your manifold in place securely, so it may perform to your expectations. Secure your intake manifold for leak-free performance with a set of ICT Billet bolts.
( 23 )
$25.99
—
$29.99
Pioneer throttle cables are designed to replace your damaged or worn-out OEM throttle cable. They're made from quality materials and have the factory ends installed for a direct fit. These cables are available in a variety of configurations to fit your specific engine and transmission applications.
( 68 )
$38.79
Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly. These valves are often referred to as idle air control or IAC valves (GM), automatic idle speed or AIS valves (DCX), and throttle air bypass solenoid or AIR valves (Ford). These idle air control valves are used on both throttle body and multi-port fuel injected engines to regulate idle speed. The IAC valves open a small bypass circuit that allows air to flow around the throttle. Increasing the volume of air that's allowed to bypass the throttle increases idle speed. The engine's computer controls the IAC valves, if idle speed is out of range, and commands the IAC valves to either increase or decrease the bypass airflow. Replace your vehicle's worn or malfunctioning idle air control valve with these reliable Standard Motor Products replacement IAC valves.
( 54 )
$43.99
—
$45.99
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 226 )
$28.95
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 394 )
$28.99
—
$44.99
ARP's intake valley cover bolt kits are the perfect fit for your next build. They are precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads and in either polished stainless or with a black oxide coating. Don't waste time trying to reuse old bolts--grab ARP intake valley cover bolt kits.
( 8 )
$23.99
—
$47.99
Bugs, debris, and loads of dust assault our vehicles' air cleaners on a daily basis. Just as the military protects us, S&B Filters air filter wraps keep harmful enemies to your vehicle's motor at bay. These prefilters are designed to fit individual S&B filters. They have micron sized openings, allowing clean air to easily get through, while keeping sand, dust, and suicidal bugs from their intended destruction. Extend the life and cleaning interval of your cotton filters with S&B Filters air filter wraps.
( 11 )
$29.95
Holley Sniper intake O-ring and hardware kits are designed to meet OEM standards and accommodate the installation of specific applications. Your kit may include O-ring gaskets, bolts for the intake manifold, and fuel rail brackets.
Not Yet Reviewed
$42.08
Caspers Electronics wiring harness adapters allow the use of an LS2 throttle body on an LS1 vehicle. The harnesses feature premium OEM connectors, terminals, locks, and seals to facilitate complete plug-and-play installation and optimum performance. All wiring is high-temperature automotive spec and covered by stock-appearing split loom tubing.
( 9 )
$54.99
Holley Sniper EFI throttle body adapter plates will allow the use of a Sniper throttle body on a factory intake with a different size opening. The plates are constructed of billet aluminum for superior strength, anodized for protection, and available in different bore sizes to match Sniper throttle bodies. Order the model designed for your engine application.
( 1 )
$43.69
—
$48.25
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 259 )
$36.99
—
$50.99
ICT Billet supercharger manifold fasteners are designed to mount your supercharger case assembly to the intake manifold. They're available in a variety of styles, materials, and finishes based on your specific supercharger model. Order the set recommended for your application.
Not Yet Reviewed
$29.99
Summit Racing™ GM harness adapters allow the use of an LS2 throttle body on an LS1 vehicle. The wiring harnesses feature premium OEM connectors, terminals, locks, and seals to facilitate complete plug-and-play installation. All wiring is high-temperature automotive spec and is covered by stock-appearing split loom tubing.
Not Yet Reviewed
$47.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
