Availability
Showing In Stock Items. Show All 19 Items.
Clearance
Why spend time and money reconditioning your stock rods—when you can upgrade to a set of Eagle SIR I-Beam connecting rods for less? They're forged from 5140 steel for outstanding strength and reliability, and they come in both press-fit and bushed pin models. Their lightweight design places less stress on the rest of your rotating assembly to increase engine life and better handle high-rpm use. The rods are X-rayed, sonic-tested, magnafluxed, and shot-peened to stress-relieve the metal. They come with 12-point ARP Wave-Lok rod bolts and are weight-matched to within two grams. The big end sizing is controlled by in-house CNC equipment to ensure precise machining and accurate fitment. Order the individual rod or set recommended for your year/make and engine application.
( 81 )
$74.99
$49.50
Clearance
Made For You Bowtie wire looms are molded from 6-6 Zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. They're designed specifically for 1987 and later Chevy center-bolt valve covers. They feature a unique Bowtie design that mounts to the center of your valve covers, and not only adds style but securely holds your plug wires, too. The looms contain Bowtie wire holders, molded nylon wire separators, and stainless steel mounting hardware. Their innovative design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 4 )
$68.95
$49.50
Clearance
A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.
( 721 )
$409.99
$211.50
Clearance
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 370 )
$43.99
$27.99
Clearance
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 6 )
$27.99
$18.50
Clearance
CA offers strut rods for a variety of applications, including Ford Mustangs from the 1960s and '70s, and Chevy Corvettes from the 1960s, '70s, '80s, and '90s. These replacements attach the control arm and frame of your car's suspension system, helping the suspension return to normal after braking or accelerating. The components are machined from steel with a black painted finish; and many kits are adjustable and/or include hardware. Each strut rod meets or exceeds OE specifications and quality. Select the model with options designed for your vehicle. Sold individually for left or right side, or in kits for both sides.
( 1 )
$99.99
$79.50
Clearance
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$37.99
$30.50
Clearance
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$28.99
$21.50
Clearance
Classic Tube fuel return lines are a great way to replace the stock hoses on your vehicle. These accurately bent lines are manufactured to OE specifications in steel, stainless steel, and aluminum for improved looks under the hood, a perfect fit and exceptional corrosion resistance. Lines come pre-installed with all the necessary fittings and flares to provide an easy and direct installation. Order the fuel line model for your application.
( 6 )
$70.99
$61.50
Clearance
GPC header gaskets from Flatout Gaskets are made to handle the heat produced by headers. They are made from graphite facing material, which has unique thermal and mechanical properties. Its thermal conductivity is extremely high and actually pulls heat away from the heat source. Its surface characteristics allow for radial "slide" to accommodate expansion and contraction of the joint without damage.
( 9 )
$34.99
$30.50
Clearance
Flatout Gaskets RCC copper cylinder head gaskets are made with an exclusive rubber-coated copper process. The base metal is 100 percent soft annealed copper and the specially formulated, high-temperature rubber coating is designed to seal oil and coolant.
( 13 )
$196.99
$138.50
Clearance
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z23 Evolution Sport carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise, so you can ride in comfort. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber, for increased braking power without sacrificing everyday drivability. The necessary stainless steel hardware, along with ceramic brake lubricant, is included with the Z23 brake pads making it easier to complete your brake job. Use Z23 Evolution Sport brake pads to give your daily-driver the stopping power it deserves.
( 344 )
$45.95
$30.50
Clearance
Available in keyed and non-keyed styles, Isky lifter bore bushings are precision made from a special bronze alloy that lasts 2 to 4 times longer than most others. They also prevent excessive scuffing of roller lifter bodies. Isky keyed-style lifter bore bushings are for keyway roller lifters. Select the correct size for your engine and lifters.
Not Yet Reviewed
$605.99
$420.50
Clearance
Eagle competition rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Depending upon your selection, these kits may feature a crankshaft, pistons, piston rings, rod and main bearings, or connecting rods. Balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 33 )
$2,589.99
$1,683.50
Clearance
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 10 )
$30.99
$20.50
Clearance
Keyser Manufacturing wheel bearings help keep you racing trouble-free. Keyser offers hub bearings to keep your Wide 5, 5x5, Grand National, and more on track. These quality bearings are available individually or in kits. Keep your race car in top performance to cross the finish line first, with Keyser Manufacturing wheel bearings.
( 2 )
$19.99
$14.50
Clearance
AutoExtra wheel bearings can help to eliminate unwanted front-end noise. Manufactured to OEM specifications, these replacements can be installed easily with no modifications. Hundreds of models are available for fitment on thousands of applications.
( 2 )
$34.79
$17.50
Clearance
Centric Brakes can save you the hassle of tracking down a laundry list of replacement parts! Their extensive line of OE-style loaded calipers arrives with application-specific Posi Quiet brake pads already installed. These top-quality units are designed, assembled, and tested to meet or exceed the performance of your factory calipers. Depending on your application, the calipers are available in various materials and finishes. Other new components included are: guide bolts, pins, through-bolts, seals, O-rings, boots, dust seals, and abutment clips. For quiet, effective braking that's also easy on the pocketbook, order the Centric loaded brake calipers tailored for fitment on your vehicle.
( 3 )
$39.99
$28.50
Clearance
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
$28.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
