Availability
Showing In Stock Items. Show All 22 Items.
Summit Racing™ manual transmission safety bellhousings are SFI 6.1 approved bellhousings designed and manufactured to fit most popular vehicles—whether for racing or used to swap engines/transmissions. The Summit Racing™ bellhousings will give you a peace of mind that should a clutch or flywheel failure occur, the damage will be contained within the bellhousing. The Hydroformed process of these components makes for a superior one-piece design, thus, producing a consistent wall thickness and uniform strength throughout the structure to eliminate possible weak welded joints. These bellhousings use certified American made steel, stress relieved, then is shot peened to reach maximum yield strength. Features and benefits include: * Hydroformed process provides a superior one-piece design, consistent thickness, no welded joints * Made with certified American made steel- stress relieved and shot peened for maximum strength * CNC-machined and Blanchard ground attains the most accurate alignment of crank centerline and input shaft, as well as minimizes shifting issues and premature part failure * Powdercoated for maximum corrosion resistance * Precision machined block protector included * ARP mounting fasteners included
( 7 )
$701.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$849.95
—
$1,149.95
$747.95
—
$774.95
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$551.65
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$507.60
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$615.60
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$553.40
—
$864.60
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$510.00
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$748.72
—
$864.60
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$790.59
SPEC Stage 3+ clutch kits are primarily intended for street use, drag racing, pulling, and autocrossing. As the flagship stage for a high-powered street or race car that requires a manageable and friendly engagement, Stage 3+ clutch kits feature carbon-graphite full-faced material that offers unparalleled life, friction co-efficient, and drivability in one package. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3+ clutch kits: * High-clamp pressure plate * Carbon semi-metallic friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 4 )
$779.40
On Sale
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$608.99
$517.64
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$813.82
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
