Availability
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 505 )
$79.95
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$79.99
—
$104.99
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 4 )
$109.99
Summit Bucks
The factory-original fit and lasting function of ACDelco Gm Genuine Parts automatic transmission pans provide a perfect repair without breaking your budget. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Features: * Built with premium materials for prolonged service * Precisely engineered to OE specifications * Trouble-free installation and function ensured by rigorous testing procedures * Designed for direct compatibility
( 14 )
$59.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 353 )
$53.99
—
$60.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 195 )
$59.95
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$77.99
—
$110.99
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 230 )
$111.99
Clearance
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 317 )
$53.99
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$64.99
QA1 Pro coilover springs fit perfectly with QA1's front Pro Coil Shock Systems. These springs are available with flat or pigtail ends and in 10 or 11 in. free lengths. Made with the highest quality materials, QA1 springs are strong, consistent, and have a long life. Order the style, size, and spring rate options needed for your application. Additional details: * Chrome Silicon steel (CrS) construction for high strength, consistency, and long life * Cold wound, heat-treated, and shot peened to ensure consistency, accuracy, and durability * Silver powdercoated for excellent longevity * High Travel (HT) options have fewer coils and a smaller wire diameter; as a result, they're lighter and have increased travel due to the larger distance between the coils. They reduce unsprung weight and react faster, optimizing suspension performance * Springs are clearly marked with the free length of the spring and spring rate for quick and easy identification * All QA1 springs are lifetime guaranteed to remain within 2 percent of the original free height and rate under normal operating conditions * For Mustang struts or rear Pro Coils, see QA1's 2.5 in. I.D. springs
( 45 )
$99.95
—
$104.95
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
On Sale
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 504 )
$85.99
—
$116.99
$77.39
—
$105.29
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 13 )
$74.99
Summit Racing™ oil pump and pickup kits include a high-quality Summit Racing™ oil pump, plus a machined pickup. Some applications feature the pickup tube tack-welded to the pump.
( 166 )
$103.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$63.99
—
$108.99
On Sale
QuickTime bellhousing spacers are a great way to make more clearance for your clutch. They are made from quality materials and are zinc plated for a long-lasting finish.
( 9 )
$87.05
ICT Billet bellhousing spacers for GM bellhousings are installed between your transmission and bellhousing to gain more space for extra hydraulic clearance. Manufactured from billet aluminum, they will ensure proper clearances are maintained for alignment and smooth operation.
( 27 )
$58.99
—
$64.99
Trick Flow® rocker arm studs are ideal for street or competition use. These studs are made from 8740 chromoly steel.
( 22 )
$56.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$84.99
—
$86.99
On Sale
UMI Performance non-adjustable lower control arms are designed to replace the factory setup. In doing so, they minimize wheel hop and improve cornering, while lowering track ETs and helping track consistency. UMI Performance non-adjustable lower control arms eliminate the flex and bushing deflection found in the factory lower control arms. Their tubular setup is built using 1.500 in. drawn-over mandrel tubing and features TIG-welded construction for the utmost in strength and durability. The rubber OEM bushings are replaced with greasable polyurethane bushings.
( 146 )
$99.99
$89.99
On Sale
Liqui Moly Top Tec 4200 is a modern fully synthetic, low-SAPS motor oil blended for superior performance and long engine life. Designed for use in numerous Volkswagen and Audi vehicles, this formula is also suitable for use in a variety of BMW and Mercedes-Benz diesel vehicles, as well as specific Porsche models, etc. Use with extended oil change intervals, as per your vehicle manufacturer. The oil is available in single liters and multi-liter quantities.
( 2 )
$56.99
$51.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
