Filters
Replace your stock exhaust with one of these free-flowing exhaust systems from Summit Racing™. They're designed to clear trailer hitches and spare tires, unless otherwise noted. Our cat-back systems feature mandrel-bent aluminized tubing, single or dual outlets, turbo, chambered or glasspack mufflers, and all hardware needed for the installation. Nearly a hundred kits are available; order the model recommended for fitment on your vehicle.
( 838 )
$359.99
—
$488.99
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2331 )
$312.99
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 533 )
$526.95
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 435 )
$304.00
—
$407.00
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 182 )
$279.00
—
$438.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$560.00
Let your engine breathe easy! Pypes off-road X-pipes are free-flowing, with reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses, rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a Siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipes quicker, and this improved "breathing" increases horsepower. Pypes X-pipes' high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated pipes resist corrosion and extend the life of your system.
( 81 )
$281.97
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 26 )
$282.99
—
$368.99
Specifically created for Californians, Walker CalCat universal fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters feature a universal, weld-in design at a great cost savings over expensive OEM converters and feature a stainless steel body, heat-shielded pipe, and structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat universal catalytic converters. Order the model designed for your application needs.
( 45 )
$401.99
—
$522.99
Catco universal-fit catalytic converters offer great features, including aluminized steel heat shields (many have dual shields), 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat—all of which help the converters last longer. These converters are designed so that you can add one to any vehicle that wasn't originally equipped with one. Many models have steel air tubes with numerous perforations to help distribute the airflow evenly without robbing power, and most have slip-fit connections for an easy installation. Choose the inlet/outlet diameters needed for your application.
( 17 )
$315.99
Walker universal catalytic converters feature stainless steel bodies, heat-shielded pipes, and structural braces for enhanced strength and durability. These exhaust system components are easily adaptable for custom applications with aluminized expandable bushings and aluminized heat shields. Walker converters provide good flow, while cleaning up the air with OEM looks, fit, and dependability. Make the grade and reduce vehicle emissions by replacing your old catalytic converter with a new model from Walker.
( 26 )
$376.99
—
$401.99
AP Exhaust universal catalytic converters will work to make your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering comprehensive coverage, AP Exhaust can provide universal catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust universal catalytic converters offer the quality, fit, and value to meet those concerns.
( 6 )
$360.99
—
$490.99
Since you have to use a catalytic converter anyhow, you might as well use one that will last a long time and maintain your vehicle's performance level in the process. Catco direct-fit catalytic converters feature 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat—all of which help them to last longer. These Catco units are direct replacements for OE converters and will install with little or no modification. Some converters have steel air tubes with perforated holes to help distribute the airflow evenly, without robbing power. New flanges are included when necessary. Order the model designed for your vehicle application.
( 51 )
$263.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
