Availability
Showing In Stock Items. Show All 68 Items.
Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 87 )
$1,187.99
—
$1,639.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$1,049.95
—
$1,149.95
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 126 )
$1,506.99
—
$1,569.99
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 175 )
$1,095.95
—
$1,176.99
These RAM single disc push-type conversion C4 Corvette clutch kits are designed to replace the pull-style clutch and dual mass flywheel in your factory 1989-96 C4 Chevrolet Corvette. They consist of an aluminum flywheel, a high-clamp Borg and Beck-style pressure plate with a 2,800 lb. clamp load, and a RAM 300 Series organic clutch disc. The RAM single disc push-type conversion C4 Corvette clutch kits use an internal hydraulic throwout bearing, replacing the factory release mechanism, to complete the install. Best of all, these clutch kits are capable of handling up to a 700 hp holding capacity.
( 2 )
$1,099.00
—
$1,427.00
COMP Cams Xtreme fuel injection cam and lifter kits are designed for late model applications, muscle, sports cars, trucks, and more. Ground using faster-opening and more efficient ramp profiles, the kits include a matched set of COMP Cams High Energy lifters to maximize efficiency. If you're working with fuel injection, get the most power out of your engine with COMP Cams Xtreme fuel injection cam and lifter kits. Order the model tailored for your vehicle and engine specs.
( 8 )
$1,166.95
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 101 )
$1,056.95
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,399.99
These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as is evident in the hub design. Each hub has one bolt circle. Instead of adding an additional bolt circle, Strange machined five large lightening holes to reduce rotating weight. The billet aluminum hub is further lightened by its scalloped design and fully machined billet aluminum hubcap.
( 28 )
$1,249.99
Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.
( 121 )
$1,231.58
RAM has developed these dual disc push-type conversion C4 Corvette clutch kits to replace the factory pull-style unit with a conventional single or dual disc push-style package. Each conversion kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. You have the choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations. So, if you are tired of using the factory pull-style clutch system in your C4 Corvette, these dual disc push-type conversion clutch kits from RAM can provide a viable solution. Order the RAM conversion clutch kit for your application needs.
Not Yet Reviewed
$1,375.00
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$1,009.95
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 63 )
$1,222.24
—
$1,388.40
On Sale
Hooker Street Force headers are designed to be a high performance alternative to the stock OE manifolds. They are built to accommodate all emission control devices. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Hooker Street Force headers include: * Tuned-length primary tubes for maximum exhaust scavenging and velocity * Mandrel-bent tubing for smooth exhaust flow * Lightweight and sturdy 16-gauge tubing * 3/8 in. machined flanges for a perfect seal * Industry's best welds for durability * Designed as high performance, direct fit replacements for OE exhaust manifolds * Will accommodate all emission control devices * All necessary hardware for a complete installation
( 11 )
$1,349.95
UMI Performance 1993-2002 GM F-Body Road Race front upper/lower A-arm kits come with boxed lower and adjustable upper A-arms, providing a rock-solid foundation for your autocross, road race, or corner carving 4th Gen. The lower A-arms feature fully gusseted box tubing construction, and while appearing heavy-duty, afford a 5 lb. weight savings per set over factory lower A-arms. They have factory GM pedestal location and are compatible with factory, Koni, and other T-bar, stock mount shocks. Upper arms feature caster and camber adjustment with premium rod ends. Laser-cut ball joint pads feature improved ball joint angle and increased caster (up to additional 2 degrees--varies by chassis) for lowered cars and come assembled with premium ball joints. UMI's GM F-Body Road Race A-arm kits offer the most travel and clearance of any A-arm on the market and is a must for lowered vehicles. Features and benefits: * 0.120 in. wall mild steel box tubing * Double shear sway bar mount with end link set * Double gusset design for flex-free operation * Race-quality high-misalignment rod end on vertical mount * PTFE-lined, high-load capacity race rod ends equal less suspension friction * Uses balance of OEM hardware or use a new UMI hardware kit * Premium ball joints installed * Available with a durable red or black powdercoat * Kit designed to work with the factory K-member, UMI K-members, and virtually all stock mounting point aftermarket K-members
( 1 )
$1,209.99
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$1,092.99
—
$1,413.99
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,269.99
UMI Performance complete front adjustable upper and lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance complete front adjustable A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,159.99
Positioned beneath the chassis, your fuel tank is vulnerable to weather, rust, leaks, and other potential damage. And with the price of a fill-up, you sure don't wanna be dripping gas on the driveway or the open road. Yes, there are many reasons to consider a replacement fuel tank from Dorman. Tested to meet durability standards, these direct-fit units are corrosion-resistant. Hundreds of models are in stock for a wide range of makes and models. The fuel tanks are available in various size capacities, finishes, and configurations; some include a filler neck, baffled sump, and/or lock ring set. Find the Dorman replacement tank that matches your vehicle specs for a factory-like fit and installation.
( 459 )
$1,217.99
UMI Performance offers drag specific front upper/lower A-arm kits for 1993-2002 GM F-body models that are designed to shave weight, reduce friction, and still provide plenty of strength. On the upper arms, UMI's industry leading high clearance geometry tucks into the wheel well—just like stock to afford maximum suspension travel when dropping from a wheel stand. Strong CrMo tube construction and a streamlined ball joint plate combined with high-strength aluminum racing rod ends save one half pound per side over the stamped stock arms. The lowers feature CrMo construction and UMI's newly redesigned tube configuration ensures performance and safety, whether you're landing a wheel stand or powering through the traps at 160+. They accept most major brands of racing coilovers with the 1/2 in. x 1 1/4 in. wide mount. There are provisions for a travel limiting chain and also an optional sway bar tab for light street use. These arms save 5 1/2 lbs. per side, come assembled with premium ball joints, race quality rod ends and are ready to bolt on. Product features: * Direct bolt-in for 1993-2002 GM F-body vehicles * Total weight savings of 11 lbs. * Additional caster with relocated upper ball joint pad: +2 degrees * 1 1/4 in. USA CrMo tubing * Heavy-duty aluminum racing rod ends in uppers * Race quality rod ends in lowers including high misalignment rod end on rear strut * Uses racing industry standard 1/2 in. shock mount, up to 1 1/4 in. wide * Maintains factory track width * Heavy-duty double reinforced ball joint cup * Sway bar mount installed—use optional sway bar end links (P/N 2649) * Limiter chain mount installed * Factory ball joints installed * Available in durable red or black powdercoat finishes * Optional A-arm hardware kit (P/N 2301) includes Grade 10.9 bolts, washers, and Ny-lock nuts—everything needed to mount A-arms
Not Yet Reviewed
$1,199.99
UMI Performance complete front upper and adjustable lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance front A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,029.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
