Availability
Showing In Stock Items. Show All 52 Items.
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 119 )
$19.99
—
$20.99
These Summit Racing™ main bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 96 )
$19.99
—
$23.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$12.99
—
$18.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$23.99
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 65 )
$20.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 115 )
$12.99
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, LT, and LS-based engine applications from the 1990s and up.
( 91 )
$14.99
Melling spin-on oil filter adapters convert the oil filter landing on the engine block to an oil passage. They are made for use with a remote cooler and/or a remote filter.
( 21 )
$19.99
You need guideplates to keep your pushrods from deflecting under high-rpm conditions. That's just what our Summit Racing™ guideplate sets do--and for less than what some guys charge for theirs.
( 46 )
$15.99
AFR valve guides are constructed from high-quality bronze for durability and wear. These guides are offered in a variety of diameters to suit your application.
( 3 )
$13.65
Clearance
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$19.99
These Chevrolet Performance camshaft locking plates are designed to keep your camshaft where it belongs. They feature steel construction and install easily without any special modifications. Available for different types of engines, Chevrolet Performance camshaft locking plates will keep your camshaft in place throughout the entire engine operating range.
( 12 )
$21.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$14.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$21.86
Pioneer bellhousing dowel pins are 0.4 in. longer than stock to help simplify placing the bellhousing on your engine block. Simplifying the task makes successful alignment more likely, which helps provide cleaner clutch release, maximum component life, and reduced shifter issues. Pioneer bellhousing dowel pins are designed to fit several Chevy and GM engine sizes, including both small and big blocks.
Not Yet Reviewed
$22.99
Our Summit Racing™ valve cover wing nuts will add style and security to your valve covers. Available in chrome plated steel or anodized aluminum versions, we're sure to have one that's just right for your next project engine.
( 55 )
$13.99
Summit Bucks
Fel-Pro harmonic balancer repair sleeves are designed to prevent the leaks associated with your timing cover seal. These handy service accessories are made of steel and will help seal the gaps caused by worn-out harmonic balancer shafts. The sleeves are available for thousands of vehicle and engine family applications.
( 31 )
$10.99
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 290 )
$24.95
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$12.99
Cloyes wear plates prevent your cam from walking and provide a good anti-friction surface. Cloyes offers several styles of wear plates for various applications.
( 7 )
$13.99
—
$19.99
Summit Bucks
ACDelco Gold idler pulleys are built to offer reliable operation under severe conditions. They're dependable in any weather or climate offering, you year-round performance. Mounting hardware is included on some popular applications. These pulleys are manufactured to meet or exceed your expectations for fit, form and function. Order the model recommended for your vehicle.
( 13 )
$18.99
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
Restore prime performance to your engine with the ultra-durable construction of Cloyes OE replacement timing chains. They're precisely engineered with high-quality materials for optimum chain-to-tooth fitment and timing. Cloyes has been manufacturing and marketing timing components for nearly a century and is a leading aftermarket manufacturer of timing drive components. Features include: * Made from high-quality materials for durability * Precisely engineered for optimum chain-to-tooth fitment and timing * Direct-fit for straightforward installation * Available for wide range of vehicle-specific applications
( 21 )
$20.99
Improve valvetrain stability with these Chevrolet Performance rocker arm studs. These studs are available in several sizes and for a variety of engine applications.
( 4 )
$11.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
