Availability
Showing In Stock Items. Show All 28 Items.
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$190.95
$171.85
On Sale
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 504 )
$102.99
—
$116.99
$92.69
—
$105.29
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$274.95
—
$299.95
$247.45
—
$269.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 642 )
$71.75
$64.55
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
—
$86.95
$65.08
—
$78.25
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$94.40
—
$105.00
$84.96
—
$94.50
On Sale
Holley EFI Dominator transmission harnesses provide control of your Tremec. The harnesses are terminated for VSS, reverse lockout, and reverse lights. Choose the one designed for your build.
( 1 )
$228.95
$206.05
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
$71.60
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 649 )
$101.85
—
$226.50
$91.66
—
$203.85
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 15 )
$20.00
$18.00
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$161.75
—
$179.30
$145.58
—
$161.37
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$90.05
—
$126.95
$67.54
—
$114.25
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$322.46
$290.21
On Sale
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$203.99
$173.39
On Sale
SCT Livewire Vision performance monitors can put your vehicle's vital stats on display. This easy-to-use hand-held device includes the latest data-logging capabilities to precisely measure each drive and uncover hidden power potential. Review the data and performance through the use of on-screen, customizable gauges—and extend the possibilities via additional inputs for analog sensors and backup camera, if you like. The SCT Livewire Vision performance monitor can also be used as a diagnostic tool to check and clear trouble codes. The monitor includes a windshield mount, and is compatible with a broad range of car, truck, and van applications.
Not Yet Reviewed
$398.99
$359.00
On Sale
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$100.75
$90.68
On Sale
Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.
Not Yet Reviewed
$7.99
$7.19
On Sale
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$292.46
$263.21
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 444 )
$62.90
$56.61
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$103.95
$93.56
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
On Sale
Replace your worn-out distributor adapter pigtails with Painless Performance! Painless Performance LT1 distributor adapter pigtails are designed to be original-style replacements for LT1 distributors.
( 4 )
$29.99
$26.99
On Sale
Painless VATS computer chips allow you to bypass the factory programming, making the wiring in your engine swap a snap. Since 1989, most GM fuel injection systems have incorporated a Vehicle Anti-Theft System (VATS) programmed into the stock EPROM or PCM. This means the engine will not run if it is transplanted into a vehicle without the original vehicle steering column and decoder module. If you have one of these engines and your computer has the factory programming, you need Painless VATS computer chips to make your job trouble-free.
( 11 )
$52.99
$47.69
On Sale
MechMan Elite Series billet alternators offer great amperage output and durability. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these stunning alternators totally durable for daily use. Plus, the 6-phase hairpin stators make the alternators fundamentally more efficient, equating to incredible output at extremely low engine rpm, less energy wasted in the form of heat, and more horsepower to the wheels. MechMan Elite billet models are available for replacement or upgrade, and they are available in a unique selection of finishes and amperage outputs. Choose one designed for your vehicle.
( 10 )
$629.00
$534.65
Modal Header