Availability
Showing In Stock Items. Show All 75 Items.
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$2,049.95
—
$2,149.95
$1,843.95
—
$1,933.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
On Sale
Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 42 )
$1,667.95
—
$1,669.95
$1,501.16
—
$1,502.96
On Sale
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$1,995.00
$1,795.50
On Sale
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,275.00
$1,777.50
—
$2,047.50
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
$1,573.95
On Sale
For serious stopping power, check out Baer's SS4+ disc brake systems. They're designed to fit most 15 in. wheels, and feature Baer's S4 4-piston caliper mounted to a 2-piece slotted, drilled, and zinc plated rotor. Kits include high-grade stainless hardware and a pre-assembled 2-piece rotor. These systems are available for the front or rear, in black, silver, and red finishes. Order the model designed for your axle and wheel bolt pattern. If you've been looking for a street-legal, lightweight, drag strip or autocross-compatible brake system—you've come to the right place!
( 11 )
$1,894.95
$1,704.95
On Sale
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
$1,709.10
—
$1,943.10
On Sale
RideTech 1958 Chevrolet coilover suspension systems are specifically designed for the 1958 Chevy B-body cars (including the Impala, Del Ray, Bel Air, Biscayne, Brookwood, and Nomad). They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These kits contain front upper and lower StrongArms, front and rear MuscleBars, plus front and rear HQ Series coilovers. Enjoy the benefits of buying a complete system that takes all of the guesswork out of your suspension upgrade. Features, items, and specs: * Must be used with 1959-64 stock spindles and disc brakes * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Hyperco springs provide a consistent spring rate that will last a lifetime * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement (includes a tubular upper wishbone specific to the 1958 model year)
Not Yet Reviewed
$1,685.00
$1,516.50
On Sale
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,750.00
$1,575.00
On Sale
RideTech 1959-64 Chevrolet coilover suspension systems are specifically designed for the 1959-64 Chevy B-body cars (including the Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood). They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These kits contain front upper and lower StrongArms, front and rear MuscleBars, plus front and rear HQ Series coilovers. Enjoy the benefits of buying a complete system that takes all of the guesswork out of your suspension upgrade! Features, items, and specs: * Must be used with stock spindles * For cars with two rear upper control arms, an additional StrongArm is required * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Hyperco springs provide a consistent spring rate that will last a lifetime * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear StrongArms provide added strength to help get the power to the pavement * Upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind
Not Yet Reviewed
$1,825.00
$1,642.50
On Sale
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
$1,575.00
On Sale
UMI Performance bolt-in Viking rear coilover kits allow full ride height, spring rate, and damping adjustability. The double shear upper mount is a direct bolt-in and holds a true 2.5 in. diameter coilover spring. The FEA designed lower bracket bolts in using the standard shock mounting hole as well as an additional reinforcement hole. Drilling one 3/8 in. hole per side is required to complete installation. The coilover kits utilize Viking shocks that are 19-way adjustable in both compression and rebound to ensure the perfect setting for every application. Viking shocks are fully rebuildable. The 2.5 in. diameter coilover springs are available in 14 in. long, 110 lb. spring rate for drag use; 14 in. long, 125 lb. spring rate for street use; and 12 in. long, 150 lb. spring rate for autocross and road race applications. The coilover kits have been tested with 1.5 in. diameter UMI trailing arms, as well as UMI's 22mm sway bar and 32mm drag anti-roll bar. Fitment with other brand sway bars and larger diameter control arms is not guaranteed. Please contact UMI for additional information regarding fitment. Key features: * Brackets manufactured entirely from 3/16 in. mild steel * Laser-cut brackets for consistency and a precise fit * TIG-welded for superior strength and clean looks * Powdercoated brackets for a long lasting finish * Viking double-adjustable shocks offer 19 compression and 19 rebound adjustments * 3 spring rate options, depending upon application * Bolt-in design * No welding required * Spacers included for use with control arm relocation brackets
( 10 )
$1,805.99
$1,625.39
On Sale
RideTech TruTurn StrongArms packages are upgraded control arm systems that include tubular StrongArms, tall ball joints, Delrin bushings, and tie rods. What can you expect from these systems? Resolved bump steer and camber gain issues. Your tires will lean into the turn, the bump steer is optimized to under 0.065 in. through 5 in. of suspension travel, and you have the clearance to run up to a 275mm tire. These packages are available for hundreds of vehicles; order the kit recommended for your application. Features: * Taller upper ball joints to increase camber gain * Integrates with OEM spindles * Centers the wheels in the wheelwell with increased caster settings * Includes upper and lower StrongArms, outer tie rods, and billet tie rod adjusters
( 2 )
$1,710.00
$1,539.00
On Sale
Baer Brakes SS4 disc brake systems deliver superb stopping power. These systems feature their S4 4-piston calipers mounted to a slotted, drilled, zinc plated rotor (see diameters). Baer systems include unique billet backing plates that not only act as caliper mounts, but also house the banksia (one-piece) park shoe--a more modern and better working park brake assembly (on rear kits). Baer Brakes SS4 disc brake systems are completed with stainless steel brake hoses and the proper banjo fittings, and come in a choice of red, black, or silver powdercoat for the calipers.
( 3 )
$1,694.95
$1,524.95
On Sale
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$1,680.00
$1,512.00
On Sale
Track quality—RideTech TQ coilover shocks offer a performance level for competition. TQ coilovers feature a single rebound adjustment and a dual stage—high speed and low speed—compression adjustment. RideTech also designed these monotube aluminum shocks with a remote reservoir that is connected with a 30 in. braided line for easy installation in a variety of applications. These supreme shocks are surrounded by powdercoated high-tensile premium steel CNC cold-wound springs that offer less weight, more resistance to bowing, and increased travel. There's ride quality, handling quality, and now track quality from RideTech—the TQ series of coilover shocks for winning performance on road courses, race tracks, and extreme environments. Other premium features: * Impact-forged aluminum body * Anodized finished * CNC-machined billet hardware * Larger piston * Double sealed rod guide * 5/8 in. chrome shock shaft
Not Yet Reviewed
$1,860.00
—
$2,110.00
$1,674.00
—
$1,899.00
On Sale
Aldan American Road Comp suspension packages are available for a variety of applications, including many GM muscle cars and 1990s era Chevy trucks. Their coilovers are machined from lightweight, high-strength 6061 T-6 billet aluminum. They are fully ride-height adjustable, allowing a stock height to 2.0 in. of lowering, for maximum performance and on-road comfort. The coilover kits are designed for an OEM-like fitment using factory shock and spring mounting locations. These coilovers can be used with factory or aftermarket tubular control arms. Dial in your suspension with the Aldan Road Comp package recommended for your vehicle.
( 6 )
$1,767.95
$1,591.16
On Sale
You may have to slow down in a hurry—and if your vehicle is carrying tons of weight, it's not always easy to attain the greatest braking performance. That's where Baer Pro brake kits come in. Designed as direct bolt-on systems pre-loaded with ceramic brake pads, they feature slotted, drilled, and zinc plated rotors—and the calipers have dust and weather seals. Baer Pro brake kits are suitable for virtually any level of performance, on the street or track. Find the front and/or rear system compatible with your vehicle.
( 1 )
$1,794.95
—
$2,144.95
$1,614.95
—
$1,929.95
On Sale
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,685.00
$1,516.50
On Sale
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 29 )
$1,848.70
—
$2,290.45
$1,556.80
—
$1,928.80
On Sale
What are some of the virtues of a quality RideTech StreetGrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a StreetGrip suspension system—RideTech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.
( 1 )
$2,165.00
—
$2,200.00
$1,948.50
—
$1,980.00
On Sale
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,275.00
$1,777.50
—
$2,047.50
On Sale
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 15 )
$2,195.00
—
$2,295.00
$1,975.50
—
$2,065.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
