Availability
Showing In Stock Items. Show All 95 Items.
Saggy, old springs can ruin your ride. Restore factory-fresh handling with stock-height rear leaf springs from Summit Racing™. They will fit and perform just like the originals, making the install easier and your ride quality like-new. Select the rear leaf springs designed for your vehicle.
( 53 )
$139.99
Summit Bucks
A dual exhaust system for the masses. Dynomax Header-Back Dual exhaust kits are designed for people who take pride in creating their own custom exhaust. They allow the installer to custom-tailor them to fit vehicles with non-OEM aftermarket headers. They're made from extra-long, 16-gauge aluminized steel for lasting durability, and the tailpipes exit out the sides. All necessary hardware and instructions are included for a complete installation. Mufflers are not included.
( 211 )
$195.99
—
$218.99
Summit Racing™ offers rear lowering leaf springs for a wide range of vehicles, from the 1960s and up. These suspension enhancements can give your car, truck, or SUV a more aggressive stance with improved ride quality. The leaf springs are available for a variety of lowered heights; order the model recommended for your application.
( 36 )
$124.99
On Sale
Belltech lowering mutli-pack leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 in., depending on application, while still retaining a factory ride quality. By articulating the arch of the leaf spring, they provide the appropriate spring rate for a lowered ride height and utilize the latest manufacturing techniques. All leaf springs are powdercoated and come complete with OEM bushings and sleeves. Order the Belltech leaf springs that are suited to fit your needs.
( 96 )
$225.00
—
$265.00
$202.50
—
$238.50
Auto Metal Direct radiator core supports are superior reproductions of the original pieces. They reinforce the front sheet metal on your car and keep your radiator solidly mounted and properly supported. Auto Metal Direct radiator core supports are constructed from top-quality steel and are EDP coated for corrosion resistance and long life.
( 69 )
$209.99
—
$259.99
Auto Metal Direct Spectra Steel OE replacement fuel tanks are part of the most extensive coverage in the aftermarket and are crafted from corrosion-resistant steel that is plated inside and out. Their strong, electrically welded seams are reinforced, and each tank is pressure-tested for leaks. Tank straps and sending units are sold separately. Features include: * Exact fit for easy installation * 100 percent factory-tested * OEM-approved ni-terne steel * Precision-engineered and tooled to meet or exceed OE specifications * Validated for fit, form, and function * Manufactured under ISO 9001-TS 16949 quality system * Transit-tested packaging * 3-year limited warranty * For use with gasoline containing up to 20 percent ethanol (E20) and diesel containing up to 5 percent biodiesel (B5)
( 141 )
$219.99
—
$249.99
On Sale
UMI Performance front sway bars are designed to reduce body roll and under-steer and increase corning capabilities, resulting in a more balanced suspension. These front sway bars are more rigid than the factory originals and will bolt directly in place with no modifications. Each kit includes new Energy Suspension end links and greaseable sway bar bushings with new zinc plated clamshells. Nearly two dozen models are available for vehicles from 1963 and up; order the sway bar recommended for your application.
( 98 )
$259.99
$233.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 74 )
$254.99
—
$269.99
We know how body roll, understeer, and sloppy handling can ruin a drive (or cost you a race)--that's why we offer you these affordable Summit Racing™ sway bars. They're made from solid 4140 chromoly spring steel for strong suspension support, have a gray wrinkle powdercoated finish for durability, and include polyurethane bushings and mounting hardware. Since the sway bars are specifically engineered for each application, installation is easy, and you'll enjoy a better ride with reduced body roll and improved cornering traction in no time.
( 378 )
$199.99
OER offers gas tanks for countless applications from the 1940s and up. Leaky or rusted fuel tanks are both costly and dangerous. These replacements are careful reproductions of the originals, in a variety of sizes, configurations, materials and finishes. All OER gas tanks are meticulously constructed to factory specifications for a proper fit for your specific vehicle. Additional details: * Includes lock ring and O-ring gasket for the fuel sender * Does not include fuel sender (sold separately) * Zinc coated steel tanks offer standard corrosion resistance * OE-quality ni-terne coated steel fuel tanks provide better corrosion resistance * Polished stainless steel fuel tanks offer both show-quality appearance and superior corrosion resistance
( 65 )
$238.99
—
$264.99
Complete your dual exhaust system and gain horsepower at the same time with these Pypes downpipes. They are designed to connect to your factory manifolds and terminate at the transmission crossmember (some applications will require trimming for length). These downpipes are made from mandrel-bent stainless steel tubing for unrestricted flow and long-lasting performance. They include hardware and flanges, unless otherwise noted.
( 238 )
$196.79
—
$221.79
Summit Bucks
Dynomax dual kits are complete, universal, dual exhaust systems designed to perform with Dynomax headers or stock manifolds. Their special reducer design allows for a variety of mounting options, with extra-long, 16-gauge tailpipes with side exits. These kits include all needed hardware and instructions. Mufflers are not included.
( 67 )
$232.99
—
$256.99
Replace your factory parts with Belltech muscle car leaf springs for increased handling and a sleek, lowered stance. By recalculating the arch and compensating with the appropriate spring rate, these leaf springs easily lower the rear of your muscle car by up to 4 in., depending on the application. Or, if you prefer not to lower, muscle car leaf springs are available in stock height as well. These direct OEM replacements are painted black for durability and come complete with high-quality, OEM-style bushings for your American muscle. Get quiet operation, ride comfort, and a great look when you add Belltech muscle car leaf springs.
( 10 )
$226.80
—
$238.50
Upgrade the suspension of your Jeep, truck, or SUV with BDS Glide-Ride front and rear leaf springs. They offer improved handling through any conditions and provide added lift height over stock springs, making them perfect for hitting the trails, towing a heavy load, or just daily driving. Built to outperform, BDS Suspension Glide-Ride leaf springs have a multi-leaf progressive spring rate that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design and anti-friction pads. Adding BDS Glide-Ride leaf springs to your vehicle will reduce axle wrap and provide flexibility throughout the suspension cycle. Choose the set designed for your vehicle. Note: Bushings are required and must be purchased separately.
( 5 )
$253.95
—
$279.95
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$267.95
$208.75
—
$241.15
Summit Bucks
Dynomax Super Turbo cat-back exhaust systems are designed to optimize the power potential of your vehicle. Features of these systems include mandrel-bent tubing for increased flow, aluminized construction for longer life and better appearance, Super Turbo performance muffler(s) for improved sound quality and tone, and OEM mounting and hanger locations for a quick and easy installation.
( 399 )
$190.99
—
$226.99
On Sale
Flowtech Super Street Dual exhaust kits offer a top-quality, custom-fit dual exhaust system at a price that couldn't be more affordable. They feature fixture-formed, 2.25 in., 16-gauge tubing for increased performance, and a custom fit for both factory manifolds and aftermarket headers. These kits include everything from the header flange back to the tailpipe, excluding mufflers.
( 79 )
$258.95
$233.05
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 228 )
$119.99
—
$271.99
Instant Rebate
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 138 )
$263.66
Superlift lift leaf springs feature a spring rate that is reduced as much as possible, to emphasize suspension travel and a more compliant ride. These leaf springs are designed for your specific application, to ensure the lift and tire clearance you're looking for.
( 64 )
$249.99
—
$279.99
On Sale
Flowmaster manifold downpipes are designed for the person who wants to use a crossmember-back exhaust system while using the factory exhaust manifolds. Utilizing mandrel bent 409S stainless steel tubing and high quality flange gaskets. Flowmaster's manifold downpipes are designed for the perfect leak free fit. Features: * Mandrel-bent 16 gauge stainless steel tubing * Designed to be used without heat riser * Adapt exhaust to factory manifolds * Large 2.50-inch manifold downpipes
( 41 )
$231.95
—
$243.95
$208.75
—
$219.55
Instant Rebate
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z17 Evolution Plus stock replacement brake kits have everything you need for an easy, bolt-on solution for your daily driver. They feature Z17 Evolution Plus ceramic pads and Autospecialty brake rotors, along with stainless steel hardware to get the job done right. If you need a complete, fast, and easy solution that meets original equipment standards, choose PowerStop's Z17 stock replacement kits to refresh your braking power.
( 771 )
$176.52
—
$203.36
On Sale
Baer Brakes Baer Claw performance rotors improve your vehicle's braking performance and overall appearance. These direct replacement rotors feature a cross-drilled and slotted friction surface, providing an escape route for the gasses and dust that are produced during braking. This translates to a consistent pedal feel and reduced brake fade. Each pair of cast iron rotors are zinc-plated, providing a brilliant finish behind open center wheels. Baer Claw rotors are available for over 500 applications. Features and benefits: * OEM diameter, direct replacement rotor upgrade * Improved brake performance * More consistent pedal * Reduced brake fade * Brilliant finish for enhanced visual impact and appearance * Simple, bolt-on installation * No bleeding of brakes needed * Enhanced performance and appearance at an affordable price * Pair with Baer Claw performance brake pads for the ultimate stopping power
( 3 )
$216.95
$195.25
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$249.95
—
$282.95
$224.95
—
$254.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
