Availability
Showing In Stock Items. Show All 49 Items.
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 57 )
$2,024.99
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,085.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,250.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 29 )
$2,122.95
—
$2,280.95
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
—
$1,750.00
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,065.99
GM's Powerglide is one of the longest-used and most common automatics on the drag-racing scene today. They are true workhorses; and TCI has a wide variety available to pick from, making it easy to find just what you need. Many are built up from standard Powerglide cases, while others are available with stronger, tougher Reid Racing cases.
( 4 )
$2,221.95
—
$2,248.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,685.00
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 43 )
$1,532.99
—
$1,581.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$2,064.95
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,526.99
—
$1,749.99
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,549.95
—
$1,949.95
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,801.99
—
$1,802.99
Summit Bucks
These Quarter Master V-Drive clutch and bellhousing kits offer the best balance of performance, durability, and affordability for the money. They feature an open cover, an 8-leg design for maximum strength and cooler operations, and a reduced moment of inertia for lightweight power transfer, making them perfect for sportsman Circle Track, road course, and off-road racers. Their premium internal friction materials can handle high-torque capacities. The kits also include: * CAD-designed, CNC-machined aluminum or magnesium bellhousings * V-Drive clutch system with button * Steel flywheel * Flywheel bolt kit * Reverse mounted Ultra-Duty Quarter Master starter * Fixed mount hydraulic release bearing with clutch inlet and bleed line kit * Racer-rebuildable frictions and floaters to provide extended service life
( 1 )
$1,931.01
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,816.95
On Sale
VEGE Remanufactured drive axle assemblies enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured drive axles with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include steel axle shafts, third member, ring and pinion, wheel studs, bearings, and seals. Includes fluid. Hundreds of models are available, for fitment on countless 4WD, AWD, and RWD applications.
( 3 )
$2,176.99
$1,625.99
—
$2,229.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$1,683.99
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$2,041.43
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,541.99
—
$1,546.99
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$1,699.95
—
$2,250.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
