Summit Racing SpeedCard - learn how to get 10% back up to $100

Summit Racing SpeedCard - learn how to get 10% back up to $100

Haul in the Savings - Shop the Truck Savings Event Today!

CHEVROLET Chevy small block Gen I Exhaust Systems & Kits

Part Groups

Results 1 - 24 of 38

On Sale

Flowmaster American Thunder Exhaust Systems

Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.

4.36 out of 5 stars ( 543 )

$530.95

$1,149.95

Summit Racing™ Header-Back Dual Exhaust Systems

Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!

4.28 out of 5 stars ( 634 )

$339.99

$577.99

MagnaFlow Street Series Performance Exhaust Systems

MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.

4.41 out of 5 stars ( 603 )

$771.00

$1,168.00

Pypes Turbo Pro Exhaust Systems

Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.

4.18 out of 5 stars ( 28 )

$619.79

$1,412.79

On Sale

Flowmaster Stainless Steel American Thunder Exhaust Systems

Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.

4.41 out of 5 stars ( 302 )

$676.95

$1,229.95

Summit Bucks

Dynomax Dual Kits

Dynomax dual kits are complete, universal, dual exhaust systems designed to perform with Dynomax headers or stock manifolds. Their special reducer design allows for a variety of mounting options, with extra-long, 16-gauge tailpipes with side exits. These kits include all needed hardware and instructions. Mufflers are not included.

3.94 out of 5 stars ( 66 )

$233.99

$256.99

Flowmaster Pipe Kits

Flowmaster pipe kits are just like the Flowmaster exhaust systems except they don't include mufflers. This allows more flexibility in choosing the right sound for your vehicle while still providing the convenience of a pre-bent exhaust system.

4.55 out of 5 stars ( 20 )

$549.95

$585.95

On Sale

Flowmaster Force II Exhaust Systems

Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.

4.41 out of 5 stars ( 227 )

$549.95

$1,299.95

On Sale

Summit Racing™ Exhaust System Pro Packs

Change out your entire exhaust system with one of these Summit Racing™ exhaust system Pro Packs. They feature a pair of full-length headers, a pair of header reducers, and a complete dual exhaust. Depending on the application, headers may be available painted or ceramic coated and the exhaust kit will include 2.25 in., 2.5 in. or 3 in. diameter exhaust pipe. Installation, mounting hardware and gaskets are included for a complete bolt-in fit. Available for a variety of vehicles, the Summit Racing™ exhaust system Pro Packs will provide the performance and sound you have been looking for.

4.47 out of 5 stars ( 15 )

$570.98

$1,409.61

Borla S-Type Cat-Back Exhaust Systems

Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.

4.8 out of 5 stars ( 929 )

$1,035.99

$1,981.99

Summit Bucks

Dynomax Super Turbo Exhaust Systems

Dynomax Super Turbo cat-back exhaust systems are designed to optimize the power potential of your vehicle. Features of these systems include mandrel-bent tubing for increased flow, aluminized construction for longer life and better appearance, Super Turbo performance muffler(s) for improved sound quality and tone, and OEM mounting and hanger locations for a quick and easy installation.

4.45 out of 5 stars ( 434 )

$191.32

$325.99

Thrush Turbo Header Back Dual Exhaust Systems

Give your vehicle a performance-sounding exhaust. These Thrush turbo header back dual exhaust systems come complete with smooth-bent exhaust pipes, Thrush turbo mufflers, an H-pipe balance tube (included in most kits), and all hardware needed for a complete installation. Thrush header back dual exhaust systems are designed for use with full-length headers, and the tailpipes will exit in the stock location.

4.06 out of 5 stars ( 102 )

$262.99

$336.99

On Sale

Summit Racing™ Cat-Back Exhaust Systems

Replace your stock exhaust with one of these free-flowing exhaust systems from Summit Racing™. They're designed to clear trailer hitches and spare tires, unless otherwise noted. Our cat-back systems feature mandrel-bent aluminized tubing, single or dual outlets, turbo, chambered or glasspack mufflers, and all hardware needed for the installation. Nearly a hundred kits are available; order the model recommended for fitment on your vehicle.

4.14 out of 5 stars ( 848 )

$487.99


$290.69

$439.19

Pypes Race Pro Dual Exhaust Systems

Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required

4.29 out of 5 stars ( 169 )

$837.79

$1,374.79

Flowtech Super Street Dual Exhaust Kits

Flowtech Super Street Dual exhaust kits offer a top-quality, custom-fit dual exhaust system at a price that couldn't be more affordable. They feature fixture-formed, 2.25 in., 16-gauge tubing for increased performance, and a custom fit for both factory manifolds and aftermarket headers. These kits include everything from the header flange back to the tailpipe, excluding mufflers.

3.51 out of 5 stars ( 77 )

$258.95

$314.95

Stainless Works Factory Connect Exhaust Systems

Stainless Works offers Factory Connect exhaust systems for a wide range of cars, trucks, and Jeeps. They're designed to improve sound and performance. The bolt-on systems connect to the factory manifolds or Stainless Works headers. You can select either a classic muscle car tone of a chambered muffler, or go for the extreme with S-Tube style mufflers. Components are built from corrosion-resistant 304 stainless steel and TIG-welded at the company's state-of-the-art facility in Streetsboro, Ohio. Smooth mandrel pipe bends optimize exhaust flow. Factory Connect systems are available in a variety of styles (cat-back, rear axle-back, etc.), configurations, pipe sizes, tip styles, and more. Order the model with options recommended for your vehicle.

5.0 out of 5 stars ( 2 )

$1,535.20

Hooker Competition Manifold Back Exhaust Systems

Hooker manifold-back Competition exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.

4.22 out of 5 stars ( 37 )

$399.95

On Sale

Flowmaster FlowFX Exhaust Systems

Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.

4.36 out of 5 stars ( 156 )

$699.95

$999.95

On Sale

Hooker Competition Header-Back Exhaust Systems

Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.

3.73 out of 5 stars ( 129 )

$377.95


$245.95

$349.95

Summit Bucks

Dynomax Header-Back Dual Exhaust Kits

A dual exhaust system for the masses. Dynomax Header-Back Dual exhaust kits are designed for people who take pride in creating their own custom exhaust. They allow the installer to custom-tailor them to fit vehicles with non-OEM aftermarket headers. They're made from extra-long, 16-gauge aluminized steel for lasting durability, and the tailpipes exit out the sides. All necessary hardware and instructions are included for a complete installation. Mufflers are not included.

3.99 out of 5 stars ( 207 )

$206.99

Pypes H-Bomb Exhaust Systems

Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.

3.95 out of 5 stars ( 21 )

$514.79

$919.79

NXT Step Performance Exhaust Systems

NXT Step Performance exhaust systems offer improved performance and sound. NXT Step all-stainless steel systems feature polished T304 materials, and mandrel bends for maximum flow and power. The systems are finished with double-walled, beveled-edge polished tips. NXT Step high-performance systems are tested to meet their high standards for sound quality, fitment, and performance before they are brought to the streets or the track. From axle-back to full race header back systems, NXT Step Performance exhausts are ready to deliver maximum flow, increased horsepower, and exhaust note without resonance for your Corvette, Camaro, or Mustang.

4.31 out of 5 stars ( 29 )

$645.99

On Sale

Hooker Super Competition Cat-Back Exhaust Systems

Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.

4.38 out of 5 stars ( 40 )

$649.95


$422.95

$749.95

JBA Performance Exhaust Evol Exhaust Systems

JBA Performance Exhaust Evol exhaust systems are tuned and precision-built for each application, so you get a perfect fit and optimized performance every time. They are offered in both bright 409 stainless steel with 304 stainless steel tips and high-quality aluminized steel. The mufflers feature an efficient high-flow design and fully welded cases for long-lasting performance. These Evol exhaust systems increase horsepower and torque throughout the rpm range, improve fuel economy and throttle response, and produce a powerful exhaust tone and enhanced vehicle appearance. Get the power and the sound that you're looking for with the JBA Performance Exhaust Evol exhaust systems!

4.14 out of 5 stars ( 36 )

$514.05

Modal Header