Availability
Showing In Stock Items. Show All 143 Items.
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 425 )
$177.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$340.99
$180.99
—
$240.99
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 373 )
$127.99
—
$271.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 356 )
$231.95
$104.95
—
$208.75
On Sale
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 187 )
$157.00
$141.30
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 228 )
$105.99
—
$271.99
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 230 )
$198.99
—
$234.99
Auto Metal Direct Spectra Steel OE replacement fuel tanks are part of the most extensive coverage in the aftermarket and are crafted from corrosion-resistant steel that is plated inside and out. Their strong, electrically welded seams are reinforced, and each tank is pressure-tested for leaks. Tank straps and sending units are sold separately. Features include: * Exact fit for easy installation * 100 percent factory-tested * OEM-approved ni-terne steel * Precision-engineered and tooled to meet or exceed OE specifications * Validated for fit, form, and function * Manufactured under ISO 9001-TS 16949 quality system * Transit-tested packaging * 3-year limited warranty * For use with gasoline containing up to 20 percent ethanol (E20) and diesel containing up to 5 percent biodiesel (B5)
( 141 )
$112.99
—
$249.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 74 )
$254.99
—
$269.99
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 108 )
$106.95
Summit Racing™ high-volume in-tank fuel pumps will meet your fuel demands. Unlike stock pumps, which flow 88-95 lph, our pumps are available in 110, 155, 190, 255, and 450 lph versions to help your modified engine meet its power potential. Our pumps also feature an OEM-style design and are direct fit replacements.
( 41 )
$108.99
OER offers gas tanks for countless applications from the 1940s and up. Leaky or rusted fuel tanks are both costly and dangerous. These replacements are careful reproductions of the originals, in a variety of sizes, configurations, materials and finishes. All OER gas tanks are meticulously constructed to factory specifications for a proper fit for your specific vehicle. Additional details: * Includes lock ring and O-ring gasket for the fuel sender * Does not include fuel sender (sold separately) * Zinc coated steel tanks offer standard corrosion resistance * OE-quality ni-terne coated steel fuel tanks provide better corrosion resistance * Polished stainless steel fuel tanks offer both show-quality appearance and superior corrosion resistance
( 65 )
$135.99
—
$269.99
On Sale
Holley Sniper E85 in-tank electric fuel pumps are high-output models that fit the most popular EFI applications. The pumps can be regulated to support carbureted systems, as well, and all are compatible with gasoline or E85. Designed for applications requiring more fuel flow (utilizing the factory OE lines and mounting brackets), the 340 lph fuel pumps can also be used as a universal replacement—or upgrade for aftermarket applications requiring more fuel flow to support additional horsepower, while using power adders. Order the model recommended for your vehicle. Features include: * 340 lph E85-compatible * Designed for in-tank use only * Compact enough to fit in existing hanger assemblies without modification * Complete kit with all drop parts, accessories, and installation instructions * Filter, wiring pigtail, rubber hose, clamps, and rubber grommet included * Inlet filter meets or exceeds original equipment specifications and provides improved filtration/durability * Can be used with carbureted or EFI applications * Perfect upgrade for aftermarket pumps, like Holley retrofit EFI modules, when more fuel is needed with turbos or nitrous
( 30 )
$162.95
$146.65
Edelbrock Victor Series racing fuel pumps free-flow 130 gph, outpacing conventional racing pumps which flow around 114 gph. These pumps are a necessity for drag racing, Circle Track, street machines, or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. Victor pumps are designed for use with gasoline and Edelbrock's fuel pressure regulators. Order the model recommended for your application.
( 29 )
$183.95
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 253 )
$102.99
—
$266.99
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$106.93
—
$126.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$299.95
$224.95
Allstar mechanical fuel pumps will get gas from your tank to your engine efficiently. These lightweight, diecast 3-valve pumps are great for use with sportsman-type engines up to 700 hp and 8,000 rpm. They're equipped with inlet and outlet fittings that make plumbing easy, and the lower section is clockable every 30 degrees to fit most applications. Draw the desired amount of fuel to feed your engine properly with Allstar Performance mechanical fuel pumps.
( 8 )
$194.99
Carter Street Super mechanical fuel pumps flow 120 gph from 5.5 to 7.5 psi. They contain heavy-duty diaphragms, high-speed "anti-float" springs, large "full flow" valves, and lightweight all-aluminum castings. As with all Carter fuel pumps, they contain a tough, heat-treated lever.
( 111 )
$175.99
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$108.99
—
$187.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
