Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET Chevy big block W-engines Engines & Components
Showing In Stock Items. Show All 142 Items.
Summit Racing™ Hydraulic Lifters
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 105 )
$122.99
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 168 )
$12.99
—
$24.99
Trick Flow® Hydraulic Lifters and Lash Adjusters
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 48 )
$16.99
—
$814.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 290 )
$8.99
—
$95.99
Sealed Power Hydraulic Lifters
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 56 )
$6.99
Edelbrock Performer RPM 348/409 Chevy Cylinder Heads
Edelbrock Performer RPM 348/409 Chevy cylinder heads have been specifically designed for the 1961-65 Chevy W Series 348/409 big block engines. These Performer RPM heads feature aluminum construction with original port locations and valve angles for bolt-on convenience. The CNC port-matched 220cc intake runners and 90cc exhaust ports optimize flow and power throughout the entire rpm range. With their new, improved port design, the Edelbrock Performer RPM 348/409 Chevy cylinder heads are sure to add some easy bolt-on horsepower to your engine.
( 1 )
$1,628.50
—
$1,665.50
Harland Sharp Heavy-Duty Roller Rockers
Don't trust your engine investment to just any no-name rocker manufacturer. Harland Sharp heavy-duty roller rockers are specifically designed for the heavy spring pressure and high-lift geometry of highly modified engines. They're also engineered with wider bodies, resulting in increased rocker strength and longevity. So, when your engine requires extra durability, use Harland Sharp heavy-duty roller rockers.
( 60 )
$506.99
COMP Cams Pro Magnum Hydraulic Lifters
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$15.95
—
$295.95
Isky Anti-Pump-Up Hydraulic Lifters
Isky's patented anti-pump-up hydraulic Superlifters outwardly appear similar to standard hydraulic lifters, but there's a world of difference. The design of the lifters allows the use of a more radical cam, without loss of compression and horsepower from valves being held off their seats. Because they don't bleed down completely, they are also far more durable and reliable than any other lifters on the market. Power Hydraulics are premium-quality stock replacement hydraulic valve lifters.
( 13 )
$270.99
ARP High Performance Series Connecting Rod Bolt Kits
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 262 )
$11.99
—
$71.99
Melling Replacement Hydraulic Lifters
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 40 )
$21.99
Moroso Race Oil Filters
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$29.99
Perma-Cool Bolt-On Oil Filter Adapters
Perma-Cool bolt-on adapters are die cast from aerospace-quality aluminum and machined on CNC production lines. They will help convert your engine to a full-flow system (hardware and illustrated instructions included; fittings and AN adapters sold separately). Whether you're looking to replace the factory oil filter mounting plate, convert to a spin-on filter, or switching to a remote system, Perma-Cool bolt-on adapters make it easier. Order the adapter designed for your application.
( 77 )
$27.39
—
$33.79
Rhoads V-Max Flat Tappet Lifters
For maximum increases in low-end torque, engine vacuum, and improved idle quality, Rhoads V-Max variable duration flat tappet lifters are the answer. These unique lifters are designed to significantly increase low-end torque and engine vacuum. This makes them the best choice for hot street, performance marine, and all racing applications. Typical vacuum increases range between 3 to 5 in. at idle when used with bigger cams. They are fully adjustable and require an adjustable valvetrain. Adjustment is similar to solid lifters--simply use a feeler gauge to adjust the exact amount of lift reduction you want, anywhere from .010 in. to .030 in., and that is exactly what you get at idle. Duration is reduced between 5 and 20 degrees at .050 in. lift, depending on the adjustment. As the rpm increases, so does your valve lift and duration. Complete lift and duration restoration take place at approximately 4,000 rpm. V-Max series lifters are also particularly suited for racing applications with vacuum rules. You can run more cam than your competition while still meeting vacuum requirements, giving you the performance advantage.
( 7 )
$249.99
COMP Cams Solid Lifters
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$52.95
—
$758.95
Clay Smith Cams Hydraulic Lifters
Clay Smith Cams hydraulic lifters are designed, engineered, and manufactured to such exacting tolerances for the perfect fit. Made of the highest quality, these lifters are designed to accurately perform their primary function of maintaining precise valve timing under all engine operating conditions. That's why these precision engineered components are the choice of mechanics and race teams around the world. When you're ready to freshen up your engine, choose Clay Smith Cams hydraulic lifters!
( 7 )
$154.20
Aeroquip Quick-Drain Oil Pan Couplings
Aeroquip quick-drain oil pan couplings are great for street rides, hot rods, race cars, or anything else that you need to cleanly drain fluid from efficiently. They eliminate the potential for spillage by draining directly into a waste container and make changing your oil quick, clean, and fun.
( 9 )
$72.99
Howards Cams Street Series Retrofit Hydraulic Roller Lifters
Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.
( 91 )
$114.99
—
$670.99
Howards Cams Retro-Fit Hydraulic Roller Camshaft and Lifter Kits
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 72 )
$1,199.99
Summit Racing™ Extended Life Oil Filters
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 42 )
$7.99
Edelbrock Oil Fill Tubes with Breather
Edelbrock oil fill tubes and matching push-in breathers are designed for vintage-style manifolds with a 1 1/4 in. oil breather hole.
( 25 )
$28.95
On Sale
Mr. Gasket Oil Filter Adapter Kits
These oil filter adapters from Mr. Gasket mount a spin-on oil filter. Some adapters contain a filter bypass valve.
( 28 )
$29.84
Fram Extra Guard Oil Filters
With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, Fram Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection. Extra Guard filters are the perfect filter for everyday drivers who perform frequent maintenance on their vehicles Features include: * Engineered for conventional motor oil * Cellulose and glass blended media provides protection for up to 5,000 miles * 95 percent filtration efficiency * Internally lubricated sealing gasket for easier filter removal * Precision-molded nitrile anti-drainback valve for start-up engine protection * Coil spring with glass fiber reinforced nylon poppet relief valve * Sure Grip coating provides a non-slip finish for easier installation and removal
( 136 )
$3.88
Rhoads Original Hydraulic Flat Tappet Lifters
Rhoads Original hydraulic flat tappet variable duration lifters are famous for increasing low-end torque, engine vacuum, and idle quality on engines equipped with performance hydraulic cams, while maintaining maximum top-end power. Better fuel economy and improved emissions quality are often reported by customers with Rhoads lifters. The unique construction of Rhoads Original hydraulic lifters reduces lift and duration at idle by approximately .010 in. to .020 in. Duration is reduced by approximately 10 to 15 degrees. Total lift and duration are restored at approximately 3,500 rpm. Original Rhoads lifters are also anti-pump-up for higher rpm revs. Typical vacuum increases range between 1 and 3 in. Rhoads lifters can be used with either adjustable or non-adjustable valvetrains. Original Rhoads lifters, with their legendary "ticking" at idle, sound similar to solid lifters. These Rhoads Original series lifters are designed for use with high performance street, marine, or racing applications.
( 8 )
$228.99
