Availability
Showing In Stock Items. Show All 66 Items.
Fel-Pro Performance valve cover gaskets are an excellent choice for engines, especially those that produce high horsepower. Fel-Pro performance valve cover gaskets are available in many materials for a variety of applications and needs. When your engine needs new gaskets, look no further than Fel-Pro performance gaskets for the best sealing power.
( 485 )
$57.99
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 641 )
$52.99
—
$107.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 552 )
$85.48
—
$103.89
These Summit Racing™ exhaust gaskets are made from thick copper, and feature an embossed ridge around the exhaust port for a tight, leakproof seal. The copper gaskets help even out the flow between the head and header flange to minimize warping. Also, they'll conform to rough or irregular surfaces to maintain a positive seal, while keeping the header bolts tight.
( 210 )
$52.99
Fel-Pro Performance PermaTorque MLS head gaskets are proven to handle big power any way you can make it. They're designed to maintain contact pressure between the cylinder head and block during the dynamics of engine operation. PermaTorque gaskets can seal combustion, oil, and coolant despite extreme horizontal and vertical motion between the cylinder head and block. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets. For replacement or upgrade, order the model recommended for your specific vehicle and engine application.
( 171 )
$85.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 549 )
$71.99
—
$108.99
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 200 )
$82.99
—
$92.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$89.99
—
$90.99
Chevrolet designed and built your engine to begin with, so why would you go to anyone else for important parts and pieces? When you're installing a new intake, or need to replace the intake gaskets, trust Chevrolet Performance. They have the right intake manifold gaskets to seal your engine up tight.
( 46 )
$91.20
—
$91.40
AFR intake manifold gaskets are manufactured from high-quality composition gasket material. They provide excellent sealing and durability and can be trimmed if needed for modified ports. AFR intake manifold gaskets are ideal for OEM replacement, as well as high performance street, drag race, and oval track applications.
( 72 )
$56.70
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 141 )
$67.99
Help your next big-block Chevy rebuild go quicker and easier with one of our Summit Racing™ gasket sets for big Chevy. You get every gasket you need in one complete package: Exhausts, intake manifold and seals, distributor (where applicable), valve covers, timing-chain cover and seal, oil pan and seals, fuel pump, thermostat, water pump, oil pump (where applicable), rear main seal, and PTFE-coated head gaskets.
( 10 )
$77.99
Are you working on a marine engine? You may find that all of the gaskets and seals that you need for certain jobs are not contained in typical gasket sets. Fel-Pro Performance marine gasket sets cover those situations. They include the seals not found in head sets, including replacements for the oil pan, water pump, timing cover, fuel pump, and rear main seals (depending on the set you order). Order the marine gaskets recommended for your year/make and engine application.
( 46 )
$54.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$70.58
—
$129.72
Cometic MLS marine head gaskets are designed to provide maximum sealing performance for today's high-output marine engines. These high performance gaskets feature multi-layer stainless steel construction that provides excellent strength, rebound, and corrosion resistance. Their outer layers are embossed and coated on both sides with Viton®, which meets the demands of harsh sealing environments, load conditions, and surface finishes. The center layer is uncoated stainless steel, which is available in multiple thicknesses. Cometic MLS marine head gaskets promote an even clamp load across the sealing surface for reduced bore distortion, with no need to retorque.
( 7 )
$90.53
—
$95.06
On Sale
Mr. Gasket Ultra-Seal gasket sets are made of a cellulose/nitrile material that is less compressible for excellent sealing and durability. This material has an anti-stick coating, plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the perfect solution for intake-sealing problems associated with the small sealing areas between ports, and the different expansion rates of intake manifolds and cylinder heads. The choice of champions, these sets come complete with all necessary seals and can be trimmed to fit modified ports where needed.
( 73 )
$56.69
$51.05
—
$55.65
With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.
( 6 )
$94.99
—
$113.91
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 223 )
$55.95
—
$76.95
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 58 )
$66.95
On Sale
If you're rebuilding or taking apart your supercharger, then you will need these Weiand supercharger gasket sets. They include the necessary gaskets and seals to keep your supercharger operating at the proper boost levels. Available for a variety of Weiand superchargers, these Weiand supercharger gasket sets will provide you with quality gaskets and get you back on the road quicker.
( 3 )
$87.69
$78.95
On Sale
Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.
( 42 )
$69.29
$62.35
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 11 )
$50.63
—
$64.80
Peterson Fluid Systems carries quality engine seals from Tri-Tec. These rear main seals are designed for engines running crankcase vacuum—and ensure the highest vacuum levels. Peterson engine seals offer great benefits to dry sump applications.
Not Yet Reviewed
$89.99
On Sale
Mr. Gasket has two different oil pan gasket sets for your needs: Standard and Ultra-Seal. For stock rebuilds, the standard gaskets are just fine, but for high performance applications, the Ultra-Seals are where it's at. The Ultra-Seal oil pan gaskets are designed for today's performance engines that create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a fiber material that features excellent tensile strength and superior blowout resistance.
( 27 )
$74.25
$66.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
