Availability
Showing In Stock Items. Show All 100 Items.
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$1,049.95
$808.95
—
$943.95
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 234 )
$756.99
—
$1,055.99
On Sale
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 16 )
$1,099.00
$989.10
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$808.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,399.95
$763.95
—
$1,049.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$899.95
$808.95
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 59 )
$767.95
—
$820.95
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$1,049.95
—
$1,175.95
$944.96
—
$1,058.36
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 26 )
$752.99
—
$1,083.99
These TCI Ultimate StreetFighter converters are completely remanufactured with furnace-brazed hand-welded fins, a cast steel stator, a hardened pre-ground front pump hub, a dual bolt pattern, and needle bearings. These converters will give you about a 4,000 to 5,000 rpm stall speed for competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Some applications are also available with an anti-ballooning plate for use on nitrous oxide equipped vehicles.
( 4 )
$955.95
—
$974.95
These TCI Super StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. Super StreetFighters provide the ultimate street performance with a stall speed of up to 4,000 rpm and competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
( 14 )
$764.95
—
$998.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$753.19
—
$1,156.54
ICT Billet bellhousing adapter plate kits assist with connecting a Nissan transmission onto a GM LS engine with minimal modification. Available in two kits, each one is compatible with Nissan 350Z/G35 6-speed transmissions and use all standard F-Body LS T56 flywheel, pressure plate, and bellhousing components. Plates are made from aerospace-grade billet aluminum and will take the place of the front bearing cover on the transmission. ICT Billet bellhousing adapter plate kits allow transmission and clutch servicing without removing the engine in most applications, and each kit includes the bellhousing adapter plate, pilot bushing, clutch disk, alignment tool, and mounting hardware. Choose the kit designed for your generation transmission. Notes: * Standard T56 bellhousing will bolt to adapter plate * Modification to transmission entails cutting/removing OEM bellhousing and OEM front bearing cover from transmission to allow adapter plate installation * To verify transmission generation, measure input shaft bearing OUTSIDE DIAMETER: -- Generation 1 = 3.937 or 100mm -- Generation 2 = 3.543 or 90mm * Installer must verify bellhousing/adapter plate alignment is within .005 in. during installation to prevent bearing side-loading; offset dowels may be necessary to ensure proper alignment.
Not Yet Reviewed
$899.99
Motive Gear Performance ring and pinions are perfect for dedicated racing or off-road vehicles. Their gear sets are made from first-run steel, they never use recycled metal. This allows Motive Gear Performance ring and pinions to handle the extreme torque from high-horsepower racing engines. Extensive engineering, computer-controlled heat treatment, superior strength, quality and the widest selection of racing gear ratios, makes Motive Gear Performance ring and pinions the clear winner! Engineered to the highest standards, every Motive Gear Performance product goes through rigid quality control processes in their in-house lab. Motive Gear Performance also offers a lightweight alternative to standard ring and pinion gear sets. Their AX Series ring and pinions are designed to increase horsepower and efficiency by removing rotating weight. Professional race teams have used custom-lightened drivetrain parts for years, resulting in faster times and more wins. The AX Series gears from Motive are lightened during the manufacturing process; this results in gear sets that have been engineered, not modified. Computer-controlled heat treatment, index tooth spacing, and CNC machining all go into AX Series performance gear sets. Motive Gear Performance: What the pros run!
( 194 )
$1,002.71
—
$1,150.99
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$865.99
—
$891.99
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$763.95
—
$867.95
Summit Racing™ manual transmission safety bellhousings are SFI 6.1 approved bellhousings designed and manufactured to fit most popular vehicles—whether for racing or used to swap engines/transmissions. The Summit Racing™ bellhousings will give you a peace of mind that should a clutch or flywheel failure occur, the damage will be contained within the bellhousing. The Hydroformed process of these components makes for a superior one-piece design, thus, producing a consistent wall thickness and uniform strength throughout the structure to eliminate possible weak welded joints. These bellhousings use certified American made steel, stress relieved, then is shot peened to reach maximum yield strength. Features and benefits include: * Hydroformed process provides a superior one-piece design, consistent thickness, no welded joints * Made with certified American made steel- stress relieved and shot peened for maximum strength * CNC-machined and Blanchard ground attains the most accurate alignment of crank centerline and input shaft, as well as minimizes shifting issues and premature part failure * Powdercoated for maximum corrosion resistance * Precision machined block protector included * ARP mounting fasteners included
( 7 )
$799.99
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$759.46
—
$1,183.38
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$964.99
—
$1,099.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$768.99
—
$895.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$1,040.99
On Sale
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$899.95
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$928.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
