Availability
Summit Racing™ Roll-About Engine Cradles are an economical solution to store your engine. These roll-about engine cradles are made from 14 gauge square steel tubing and have a black powder coated finish. They can be disassembled for storage when not in use and include Grade 5 fasteners and 3 in.caster wheels. Max weight limit is 1,000 pounds.
( 167 )
$50.99
—
$60.99
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 190 )
$65.99
—
$81.99
Summit Racing™ 2-piece engine dollies or stands are constructed from heavy-duty, high-quality steel tubing and feature 3 in. casters. They're designed to hold 850 lbs. and come with a black powdercoat finish. The stands are ideal for engine rebuilds, swapping, prep before installation, and more. Models are available for different engine types; select the stand best-suited for your needs.
( 68 )
$84.99
—
$101.99
Summit Racing™ LS./LT engine lift plates assist you with removal and installation of your engine. Made from 1/4 in. thick steel, our super strong lift plates are specifically designed for the Late Model Gen 3,4,5 LS and LT Series GM engines. These bolt in place of the valley cover and feature three lifting points for balanced engine weight or offset for angling engine with transmission attached. Let us give you a hand in the garage with our Summit Racing™ LS/LT Engine Lift Plates.
( 6 )
$69.99
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 11 )
$71.99
Summit Racing™ oil pump primers make it easy to get oil to the top of your engine. They're designed to fit in your distributor hole and require no modifications to use. The Chevy primers feature a billet aluminum adjustable collar and black oxide coated steel shaft; while the Ford and Mopar primers use a standard steel shaft with no collar. Order the model recommended for your year/make and engine application.
( 170 )
$21.99
Our Summit Racing™ harmonic balancer wrenches rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 32 )
$61.99
—
$88.99
LSM Racing has developed the standard for changing valve springs with their innovative design. These LSM Racing valve spring removal tools are simply the best quality and easiest to use tools available. They make changing valve springs a fast and simple one-person job.
( 107 )
$259.99
—
$479.99
Put down the hammer and step away from your engine! Summit Racing™ has a better, easier way to put a harmonic balancer on your engine—one of these GM LS installation tools. These simple-to-use quality tools provide you with a hassle-free option to complete the setup. They're available in different styles for a variety of applications. Having the right tools for the job can make your life easier. Order the Summit Racing™ harmonic balancer installation tool that best suits your needs.
( 165 )
$19.99
—
$51.99
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 6 )
$45.99
The timing cover and rear cover on GM LS Series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft. This often leads to annoying leaks at the front damper seal and rear main seal. Summit™ has the solution to leak-free LS engine builds. Summit Racing™ Pro LS cover alignment tools locate or center the seal openings on the front or rear cover when it's installed, ensuring the seal is centered on the crankshaft, preventing leaks and allowing easier installation of the seals.
( 13 )
$45.99
Make valve-train servicing on your engine easier with Trick Flow® valve spring compressors. These specially made tools can remove the valve springs with cylinder heads mounted to the engine block, even on engines already installed in the vehicle. And, they make track changes quicker! Trick Flow® valve spring compressors are a must for servicing valve springs, retainers, camshafts, and valve seals.
( 158 )
$83.99
P-Ayr replica long blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
( 88 )
$494.99
—
$776.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$124.00
—
$139.00
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 9 )
$99.99
—
$229.99
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 3 )
$109.99
Pit Pal's Pro Stand engine cradles are designed for the serious racer in you. Pit Pal manufactures these engine cradles from quality 14-gauge steel and adds a zinc plated finish to ensure long life. The unique front tubes accommodate any height or angle, and the sturdy dual wheel casters make for an easier moving experience. Pit Pal also supplies two large 1/2 in. diameter spring-loaded locking pins to secure the stand during transportation.
Not Yet Reviewed
$454.99
Proform offers specialty tools to make harmonic balancer installation easier. Just thread the proper end into the crankshaft, and then rotate the nut pressing the bearing against the balancer. This in turn will slide the harmonic balancer onto the crankshaft smoothly. The tools are available in more than a dozen balancer bolt thread sizes, for universal or year/make and engine-specific applications.
( 152 )
$26.99
—
$50.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 192 )
$55.95
—
$79.95
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 9 )
$279.99
—
$299.99
OEM Automotive Tools GM harmonic balancer pullers save you time when removing harmonic balancers without tapped holes. They eliminate the need to remove the radiator. Many balancers found on GM and Mopar vehicles do not have tapped holes; these tool feature a "clip-in" design, allowing removal without bolting the puller to the balancer.
( 15 )
$65.99
These oil pump primers from Proform offer a superior design. They include a bushing to pressurize the valve train, and they prime the oil pump directly through the distributor hole, using a 3/8 in. drill.
( 80 )
$26.99
Summit Racing™ Manufacturing and Engineering harmonic balancer puller and installers feature a roller thrust bearing, a puller plate milled to accept a variety of bolt sizes, and CNC-machined components with a black oxide finish. They come complete with four heat-treated 4140 chromoly installer studs, puller bolts, instructions, and a storage case. The installers include our Summit Racing™ harmonic balancer wrenches to rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 16 )
$235.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
